Subject: Memory | May 4, 2017 - 02:01 PM | Jeremy Hellstrom
Tagged: G.Skill, G.Skill Trident Z, 32GB, ddr4-3200, RGB
What is the point of light emanating from all of your components from keyboard to PSU if your RAM doesn't match? G.Skill realized this is a pressing issue on the minds of enthusiasts everywhere and infected their Trident Z RAM with RGB-itis. The four modules in this 32GB kit have a total of 16 LEDs which can glow together or separately using the G.Skill control utility, which is still in Beta and caused some minor headaches for Kitguru. You can see the lights here, as well as some benchmarks if you are more into that kind of thing.
"Take a really close look and you will see the G.Skill logo is carried on a plastic diffuser that covers the LEDs, instead of the aluminium heat spreader, however that is the only clue that this DDR4 memory packs four RGB LEDs on each module."
Here are some more Memory articles from around the web:
- G.Skill Trident Z 3200 MHz C14 32 GB @ techPowerUp
- 32GB Corsair Vengeance RGB DDR4-3000MHz @ Kitguru
- Crucial Ballistix Elite 3200 MHz DDR4 16 GB @ techPowerUp
Subject: Memory | April 22, 2017 - 04:40 PM | Tim Verry
Tagged: z270, G.Skill Trident Z, G.Skill, dual channel, ddr4
For enthusiasts with a need for speed, G.Skill unleashed a new DDR4 memory kit recently that ratchets up two 8GB modules to 4333 MHz out of the box. The new 16GB kit will soon take the top spot in the company’s Trident Z series and will come with the traditional brushed metal heat spreader with red accent.
The new 16 GB (2 x 8GB sticks) Trident Z memory kit was validated on Intel’s Z270 platform using an Asus ROG Maximus IX Apex motherboard and an overclocked Intel Core i5-7600K. (The processor was clocked at 4200.20 MHz on a x40.0 multiplier and 104.98 MHz bus speed.) The DDR4 kit is running with CAS latencies of 19-19-19-39 and is needs 1.40 volts.
Not content to sit on its laurels, G.Skill is reportedly also working on cranking speeds up even further with a prototype DDR4 kit running at 4400 MHz and a “proof of concept” test of a 16 GB kit running at 4500 MHz. The DDR4-4500 kit is being stress tested while specifications are still under development and it will be “some time” before it is ready for market. G.Skill did manage to at least run Windows and some benchmarks at those RAM clock speeds though using the same Z270 platform listed above (with the Core i5 7600K clocked at 4360.36 MHz on a 108.98 MHz bus and x40.0 multiplier). The benchmark runs reported up to 65 GB/s write speeds, 55 GB/s read speeds, and 52 GB/s copy speeds specifically. DDR4 has come a long way in the speed department to where it is today and apparently still has room to grow.
Unfortunately, as is the case with most announcements of this nature, no official pricing and availability was mentioned. Looking around online, I would expect the 16GB DDR4-4333 kit to come in somewhere around $280 and be available within the next month or so.
I would love to see what a kit this fast would do for Ryzen as far as alleviating the CCX-to-CCX bottleneck over the Infinity Fabric assuming the Ryzen memory controller can handle those speeds! Also, faster memory has helped AMD’s APUs in the past, so these extremely fast kits that are coming out should pair well with AMD's upcoming Raven Ridge though they will need to come down in price a lot to actually meet the budget of a good budget gaming build (right now with the kits in the $250+ range it would be better to just put the premium into a graphics card – though that kind of defeats the purpose of using the APU heh).
Subject: Memory | April 7, 2017 - 03:50 PM | Jeremy Hellstrom
Tagged: Trident Z RGB, intel z270, Intel X99, G.Skill, DDR4-3333MHz, AM4, 128Gb
You did read that correctly, the new Trident Z RGB kit consists of eight 16GB DIMMs which should give you more than enough memory to play with in a variety of ways, including a decent sized RAM drive. There are also some smaller kits available as well as different frequencies, something that Ryzen users should take a peek at as AMD's new chip loves fast RAM. They do not specify AMD support but one would expect to be able to utilize these chips. This particular kit sports timings of CL16-18-18-38 and below you can see the sizes, frequencies and timings of the other Trident Z RGB kits.
As the name implies, these DIMMs do indeed have LEDs on them, supporting a wide variety of colours and with a variety of modes so you can have dynamic lighting effects, if that is your desire. You can see a video of them in action below.
PR below the fold
Subject: Memory, Shows and Expos | January 4, 2017 - 02:13 PM | Jeremy Hellstrom
Tagged: G.Skill, ddr4, ddr4-4266, ddr4-4133, G.Skill Trident Z
Kaby Lake CPUs and the associated Z270 motherboards can handle DDR4 frequencies higher than we have seen previously, good news for overclocking enthusiasts. G.SKILL may be first past the post with new DIMMs, you can pick up their Trident Z DDR4-4266 DIMMs on NewEgg right now, $230 for a 16GB dual channel kit.
This extra speed does come with an associated cost, they rate the voltage of these modules higher than you would expect from DDR4 at 1.4V as opposed to the 1.35 we are accustomed to and you should keep this in mind when shopping for a motherboard. It will be interesting to see if these extremely high frequencies have any noticeable effect in gaming performance however they are already breaking records, 8 world records and 21 global first place records.
You can see the various frequencies and timings currently available, expect to see more companies announcing new DIMMs very soon.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Memory | November 5, 2016 - 01:42 AM | Tim Verry
Tagged: G.Skill Trident Z, G.Skill, ddr4
Yesterday G.Skill announced the launch of the soon-to-be fastest DDR4 64 GB kit using 16 GB modules running at 3600 MHz. The new Trident Z kit uses Samsung 8Gb chips and pairs four 16 GB DIMMs supporting XMP 2.0 and CAS latencies of 17-19-19-39.
The DDR4 memory kit features stylized brushed aluminum heatspreaders with red accents similar to those used on existing Trident Z kits. Out of the box the kit runs at 1.35 voilts though overclockers should be able to push them further to eke out a bit more speed beyond the stock 3600 MHz!
Beyond that there is not much to the announcement other than G.Skill claiming the speed crown. Looking online, it seems the previous highest speed offered was 3466 MHz so the new modules are a decent bit faster.
According to G.Skill, the new Trident Z 64GB kit will be available in December. They have not yet released pricing, but I would expect it to MSRP for at least $570 considering G.Skill and Corsair currently have DDR4 3466 MHz 64GB kits priced at $540 and $530 respectively. If you are into overclocking, you can probably save a few bucks and overclock some lower specc'ed memory, but these might be good if you are building a workstation that doesn't need ECC (e.g. a video editing and streaming monster heh).
Subject: Memory | August 20, 2016 - 01:25 AM | Tim Verry
Tagged: X99, Samsung, ripjaws, overclocking, G.Skill, ddr4, Broadwell-E
Early this week at the Intel Developer Forum in San Francisco, California G.Skill showed off new low latency DDR4 memory modules for desktop and notebooks. The company launched two Trident series DDR4 3333 MHz kits and one Ripjaws branded DDR4 3333 MHz SO-DIMM. While these speeds are not close to the fastest we have seen from them, these modules offer much tighter timings. All of the new memory modules use Samsung 8Gb chips and will be available soon.
On the desktop side of things, G.Skill demonstrated a 128GB (8x16GB) DDR4-3333 kit with CAS latencies of 14-14-14-34 running on a Asus ROG Rampage V Edition 10 motherboard with an Intel Core i7 6800K processor. They also showed a 64GB (8x8GB) kit clocked at 3333 MHz with timings of 13-13-13-33 running on a system with the same i7 6800K and Asus X99 Deluxe II motherboard.
G.Skill demonstrating 128GB DDR4-3333 memory kit at IDF 2016.
In addition to the desktop DIMMs, G.Skill showed a 32GB Ripjaws kit (2x16GB) clocked at 3333 MHz running on an Intel Skull Canyon NUC. The SO-DIMM had timings of 16-18-18-43 and ran at 1.35V.
Nowadays lower latency is not quite as important as it once was, but there is still a slight performance advantage to be had tighter timings and pure clockspeed is not the only important RAM metric. Overclocking can get you lower CAS latencies (sometimes at the cost of more voltage), but if you are not into that tedious process and are buying RAM anyway you might as well go for the modules with the lowest latencies out of the box at the clockspeeds you are looking for. I am not sure how popular RAM overclocking is these days outside of benchmark runs and extreme overclockers though to be honest.
Overclocking Innovation session at IDF 2016.
With regards to extreme overclocking, there was reportedly an "Overclocking Innovation" event at IDF where G.Skill and Asus overclocker Elmor achieved a new CPU overclocking record of 5,731.78 MHz on the i7 6950X running on a system with G.Skill memory and Asus motherboard. The company's DDR4 record of 5,189.2 MHz was not beaten at the event, G.Skill notes in its press release (heh).
Are RAM timings important to you when looking for memory? What are your thoughts on the ever increasing clocks of new DDR4 kits with how overclocking works on the newer processors/motherboards?
Subject: General Tech | May 12, 2016 - 03:40 PM | Jeremy Hellstrom
Tagged: input, G.Skill, Ripjaws KM780R, gaming keyboard, Cherry MX, cherry mx rgb
G.Skill have joined the ranks of those who have released a Cherry MX RGB keyboard, you can choose between Red, Brown and Blue switches to accompany the light show. They chose an interesting set of caps, which float above the keyboard allowing more backlighting to show through but The Tech Report noticed that the caps feel like they are rubbing against something. As the caps are replaceable this can be resolved if you do find it to be an issue, but you will lose some light and the keyboard will not be as easy to clean. In addition to having audio jacks and a USB pass-through the optional software allows an immense amount of control over your lighting. Drop by and see if this keyboard meets your needs.
"Established RAM manufacturer G.Skill is branching into gaming peripherals of late. We've already examined the company's Ripjaws MX780 gaming mouse, and now we're looking at the KM780R gaming keyboard. Join us as we see whether this keyboard has what it takes to be a contender in the crowded gaming peripherals market."
Here is some more Tech News from around the web:
- HAVIT HV-KB366L RGB Backlit Mechanical Keyboard Review @ NikKTech
- Corsair K70 RGB RAPIDFIRE Mechanical Gaming Keyboard Review @ Techgage
- HAVIT HV-KB366L RGB Backlit Mechanical Keyboard Review @ NikKTech
- Asus ROG Spatha Wireless Gaming Mouse @ Kitguru
- Fnatic FLICK G1 @ Benchmark Reviews
- Corsair M65 PRO RGB FPS Gaming Mouse & MM300 Extended Mouse Pad Review @ OCC
Subject: Systems | February 16, 2016 - 03:36 PM | Jeremy Hellstrom
Tagged: SFF, system build, gigabyte, ocz, G.Skill, evga, logitech
The Tech Report have put together a video tour of their Breadbox system, a SFF gaming system built around the Z170 chipset. The machine uses a i5-6600K on the Gigabyte GA-Z170N-Gaming 5 motherboard with 16GB of DDR4-3000 and Gigabyte's tiny version of a GTX 970. The components are all housed in a EVGA Hadron Hydro, a tight fit but sufficient to hold the parts. Check out the video for more information on the components and how the system performs when gaming.
"We recently built a small-form-factor PC we like to call the Breadbox with some help from our sponsors at Gigabyte, OCZ, G.Skill, EVGA, and Logitech. We documented this Breadbox on video, and now it's ready to make its Hollywood debut. Grab some popcorn and enjoy our tour of this pint-sized gaming PC."
Here are some more Systems articles from around the web:
- Cyberpower Infinity Luxe 805 GT @ Kitguru
- Silent 4k Gaming Build Guide @ Silent PC Review
- Vibox Rapture-Chaos MX2 @ Kitguru
Subject: General Tech | February 1, 2016 - 12:48 AM | Tim Verry
Tagged: ripjaws, RGB LED, mechanical keyboard, G.Skill, Cherry MX
Memory maker G.Skill recently announced a refresh of its mechanical keyboard line that tweaks the KM780 series and cuts $10 off of the MSRP pricing. The two new refreshed products are the Ripjaws KM780R RGB and KM780R MX.
The new keyboards use an aluminum plate/base, Cherry MX switches, and a black anodized finish on the frame. The KM780R MX is backlit by red LEDs while the KM780R RGB can have custom per-key backlighting. Both feature a full QWERTY layout plus number pad as well as media playback keys, a LED volume level display, and six macro keys (three on-board key profiles). There is also USB and analog audio pass-through ports.
G.Skill is offering the new gaming keyboards in several models depending on your choice of key switch. Specifically, users can choose from Cherry MX blue, brown, or red switches. Connecting via USB, they employ anti-ghosting and full N-key rollover tech as well.
The every so slightly cheaper KM780R series does away with its predecessors bundled extra gaming key caps and key removal tool. The KM780R MX has an MSRP of $120 while the KM780R RGB model has an MSRP of $159.99 (Note that the brown and red variants are actually $140 on Amazon right now, but the Cherry MX blue version is not on sale.)
While I have not used them, the original models from last year appear to have garnered quite a bit of praise in reviews (particularly from AnandTech). It seems like G.Skill has not changed much and the R variants are more of the same for a bit less, and that's probably a good thing. I'm looking forward to seeing full reviews though, of course.
Have you tried the memory giant's other products before?
Also read: Mechanical Keyboard Switches Explained and Compared by Scott Michaud @ PC Perspective
Subject: Memory | January 18, 2016 - 01:45 AM | Tim Verry
Tagged: xmp, X99, Ripjaws V, G.Skill, ddr4
G.Skill is adding a new DDR4 memory kit to its Ripjaws V series aimed at the Intel X99 platform. The new kit is comprised of eight matching 16 GB DIMMs for a total of 128 GB. Supporting Intel's XMP 2.0 standard, it comes stock clocked at 3,000 MHz with CAS latencies of 14-14-14-34.
The DDR4 kit is rated at 1.35V and will feature red or black aluminum heat spreaders in line with the company's other products. G.Skill claims that this is the world's fastest 128 GB kit running at 1.35 volts, and looking around the Internet this appears to be true. Corsair does have a Vengeance LPX kit that matches it in clockspeeds, but it has higher timings (higher latency) than G.Skill's modules.
Eight 16GB DIMMs is a lot of memory to be sure, and it is not going to come cheap. It will surely come in handy though for high performance workstations that need all the memory they can get.
G.Skill will be releasing the new DDR4 kit towards the end of January. It has not yet revealed official pricing, but going off of pricing for it's 64GB kit and the 128GB competition, I would expect it to fall around $850 to $900 USD.
What would you do with 128GB of system memory? I know that I would make one heck of a RAM Disk out of it!