AMD Releases Radeon Software Crimson ReLive 17.4.4

Subject: Graphics Cards | April 28, 2017 - 03:32 PM |
Tagged: amd, graphics drivers

The latest graphics driver from AMD, Radeon Software Crimson ReLive 17.4.4, aligns with yesterday’s release of Warhammer 40,000: Dawn of War III. They claim that, when the update is applied to an 8GB Radeon RX 580, users could see a performance gain of up-to 7% under certain conditions (when compared to 17.4.3).

amd-2016-crimson-relive-logo.png

The driver was re-released on April 27th, with the new installer no-longer adding a desktop shortcut to join the Quake Champions beta. I haven’t seen it personally, but OC3D claims that the shortcut pointed to a bit.ly link. I can see why users would be upset; AMD should have added an option in the installer that says something like, “Would you like to check out the Quake Champions beta? Yes, No, Create a Desktop Shortcut for Later” rather than just add stuff to the system. That said, a desktop shortcut is as benign as you can get, and I can also see why AMD wouldn’t think much of it.

That issue aside, the driver also fixes several bugs. One notable entry is, for users with an HDR-compatible display, Mass Effect: Andromeda will now display the correct colors under Windows 10 Creators Update. The most severe fix seems to be for RX 550 users, where the GPU would hard-lock a system after “long periods of time” since the last reboot. It sounds like those users should update to 17.4.4 as soon as convenient.

Radeon Software Crimson ReLive 17.4.4 is available at AMD’s website.

Source: AMD

AMD Releases Radeon Software Crimson ReLive 17.4.3

Subject: Graphics Cards | April 21, 2017 - 02:12 AM |
Tagged: amd, graphics drivers

During the lull in game releases, AMD has released a new graphics driver with official, WHQL-certified support for Windows 10 Creators Update. As we’ve discussed in the past, I tend to err on the side of, “If you do a decent job at internal QA and the user can choose to skip a version or three, then rapid release is probably better than sitting around for a Microsoft certificate”. I mean, why not push out fixes as they are available if there’s no obvious downsides?

amd-2016-crimson-relive-logo.png

Every so often, a WHQL version needs to be certified, though, if only to be accepted into Windows Update. Note that I don’t actually know whether this specific driver will be pushed by Microsoft after an update to the Creators Update – it’s just an example of a situation where WHQL matters.

That aside, the release notes for Radeon Software Crimson ReLive 17.4.3 do not state any specific fixes or changes. The main reason for this driver is to support the Creators Update for Windows 10, as well as add support for the new Radeon RX 570 and Radeon RX 580 graphics cards.

Source: AMD

NVIDIA Releases GeForce 381.65 Drivers

Subject: Graphics Cards | April 6, 2017 - 01:57 PM |
Tagged: nvidia, graphics drivers

Lining up with yesterday’s Windows 10 Creators Update opt-in, NVIDIA releases OS Game Ready drivers. GeForce 381.65 also includes their game-specific optimizations for the Quake Champions closed beta that you have probably seen people tweeting about over the last day or so. Also, as you would expect from a graphics card and graphics driver launching on the same day, this version adds support for the new TITAN Xp.

nvidia-geforce.png

This driver also adds Ansel support to a pair of titles: Snake Pass and Kona. Snake Pass is a puzzle platformer with a bit of a Rare art style. Kona is a mystery title with, as NVIDIA describes it, adventure, puzzle, and survival elements, set in the fictional, northern Canada village of Atamipek Lake.

You can get the new drivers from GeForce Experience or their website.

Source: NVIDIA

AMD Releases Radeon Software Crimson ReLive 17.4.1

Subject: Graphics Cards | April 4, 2017 - 09:21 PM |
Tagged: graphics drivers, amd

The first AMD Radeon driver of April isn’t aligned with a major game launch. Instead, this release seems to focus on gaming technologies in general. For VR, Radeon Software Crimson ReLive 17.4.1 adds Oculus’ Asynchronous Spacewarp (ASW) to R9 Fury, R9 390, and R9 290 graphics cards. It also adds, for Windows 10, SteamVR Asynchronous Reprojection to RX 480 and RX 470 graphics cards.

amd-2016-crimson-relive-logo.png

The driver also adds a couple of extra display options based on the (also just added) DP1.4 HBR3 cable standard. For now, it seems like it’s just (read: “just”) 8K 60 Hz dual-cable and 8K 30Hz single-cable. The increased bandwidth also allows for several other formats, but those have nothing to do with today’s driver.

Update: AMD released a video on the same day to advertise 8K / HDR / FreeSync 2. Embed below.

A few bugs were also fixed, most of which were general bug-fixes not associated with games. Tom Clancy’s Ghost Recon Wildlands is the one exception, which should now scale better with multiple GPUs.

AMD Radeon Software Crimson ReLive 17.4.1 is now available from AMD’s website.

Source: AMD

NVIDIA Releases GeForce 378.78 Drivers

Subject: Graphics Cards | March 10, 2017 - 02:49 AM |
Tagged: nvidia, graphics drivers

Alongside the launch of the GeForce GTX 1080 Ti, NVIDIA has released a new graphics driver that, one, obviously supports the new card and, two, also rolls in a bunch of optimizations for DirectX 12 titles. The graphics vendor already announced the initiative at last week’s GDC, but it is now released and available for public use. 378.78 is also “Game Ready” for Ghost Recon Wildlands, although that’s mostly for Ansel support; most of the optimizations for Wildlands were pushed into the previous driver.

nvidia-geforce.png

The advertised gains vary from title to title, but they claim that Rise of the Tomb Raider at 4K will jump from 20 FPS to 27 FPS. This can be viewed as either a frame rate gain of about 33%, or it can be seen as an average frame time savings of about 12ms each and every frame. If that’s what actual end-users will see -- that’s a lot!

They also note improvements in Vulkan support, too, but without any hard, numeric assertions.

If you have a GeForce 1050 Ti notebook, then this driver is also said to fix a potential bluescreen bug that you have been facing. You can pick it up from GeForce Experience or the NVIDIA website.

Source: NVIDIA

AMD Releases Radeon Software Crimson ReLive 17.3.1

Subject: Graphics Cards | March 6, 2017 - 09:08 PM |
Tagged: amd, graphics drivers

Just prior to the release of Tom Clancy’s Ghost Recon Wildlands, AMD has released another graphics driver with specific optimizations. Radeon Software Crimson ReLive Edition 17.3.1 is support to provide up to a 6% performance improvement (on an RX 480) in that title. It also adds a CrossFire profile under DirectX 11. Note that there’s a known issue with 3- and 4-GPU systems, which will apparently make the game crash back to desktop on launch.

amd-2016-crimson-relive-logo.png

Beyond this, the new graphics driver also fixes several issues, many of which involve flickering textures, objects, or mouse pointers. It also solves an issue where installing the driver could cause a failed reboot.

If you have an AMD GPU, then you can pick up the driver from their website.

Source: AMD

NVIDIA Releases GeForce 378.72 Hotfix (Bonus: a Discussion)

Subject: Graphics Cards | February 17, 2017 - 07:42 AM |
Tagged: nvidia, graphics drivers

Just a couple of days after publishing 378.66, NVIDIA released GeForce 378.72 Hotfix drivers. This fixes a bug encoding video in Steam’s In-Home Streaming, and it also fixes PhysX not being enabled on the GPU under certain conditions. Normally, hotfix drivers solve large-enough issues that were introduced with the previous release. This time, as far as I can tell, is a little different, though. Instead, these fixes seem to be intended for 378.66 but, for one reason or another, couldn’t be integrated and tested in time for the driver to be available for the game launches.

nvidia-2015-bandaid.png

This is an interesting effect of the Game Ready program. There is value in having a graphics driver available on the same day (or early) as a major game releases, so that people can enjoy the title as soon as it is available. There is also value in having as many fixes as the vendor can provide. These conditions oppose each other to some extent.

From a user standpoint, driver updates are cumulative, so they are able to skip a driver or two if they are not affected by any given issue. AMD has taken up a similar structure, some times releasing three or four drivers in a month with only, like, one of them being WHQL certified. For these reasons, I tend to lean on the side of “release ‘em as you got them”. Still, I can see people feeling a little uneasy about a driver being released incomplete to hit a due-date.

But, again, that due-date has value.

It’s interesting. I’m personally glad that AMD and NVIDIA are on a rapid-release schedule, but I can see where complaints could arise. What’s your opinion?

Source: NVIDIA

NVIDIA Releases GeForce 378.66 Drivers with New Features

Subject: Graphics Cards | February 14, 2017 - 09:29 PM |
Tagged: opencl 2.0, opencl, nvidia, graphics drivers

While the headline of the GeForce 378.66 graphics driver release is support for For Honor, Halo Wars 2, and Sniper Elite 4, NVIDIA has snuck something major into the 378 branch: OpenCL 2.0 is now available for evaluation. (I double-checked 378.49 release notes and confirmed that this is new to 378.66.)

nvidia-geforce.png

OpenCL 2.0 support is not complete yet, but at least NVIDIA is now clearly intending to roll it out to end-users. Among other benefits, OpenCL 2.0 allows kernels (think shaders) to, without the host intervening, enqueue work onto the GPU. This saves one (or more) round-trips to the CPU, especially in workloads where you don’t know which kernel will be required until you see the results of the previous run, like recursive sorting algorithms.

So yeah, that’s good, albeit you usually see big changes at the start of version branches.

Another major addition is Video SDK 8.0. This version allows 10- and 12-bit decoding of VP9 and HEVC video. So... yeah. Applications that want to accelerate video encoding or decoding can now hook up to NVIDIA GPUs for more codecs and features.

NVIDIA’s GeForce 378.66 drivers are available now.

Source: NVIDIA

AMD Releases Radeon Software Crimson ReLive 17.2.1

Subject: Graphics Cards | February 14, 2017 - 05:57 PM |
Tagged: amd, graphics drivers

Just in time for For Honor and Sniper Elite 4, AMD has released a new set of graphics drivers, Radeon Software Crimson ReLive 17.2.1, that target these games. The performance improvements that they quote are in the 4-5% range, when compared to their previous driver on the RX 480, which would be equivalent to saving a whole millisecond per frame at 60 FPS. (This is just for mathematical reference; I don’t know what performance users should expect with an RX 480.)

amd-2016-crimson-relive-logo.png

Beyond driver overhead improvements, you will now be able to utilize multiple GPUs in CrossFire (for DirectX 11) on both titles.

Also, several issues have been fixed with this version. If you have a FreeSync monitor, and some games fail to activate variable refresh mode, then this driver might solve this problem for you. Scrubbing through some videos (DXVA H.264) should no longer cause visible corruption. A couple applications, like GRID and DayZ, should no longer crash under certain situations. You get the idea.

If you have an AMD GPU on Windows, pick up these drivers from their support page.

Source: AMD

NVIDIA Releases Vulkan Developer 376.80 Beta Drivers

Subject: Graphics Cards | February 3, 2017 - 05:58 PM |
Tagged: nvidia, graphics drivers, vulkan

On February 1st, NVIDIA released a new developer beta driver, which fixes a couple of issues with their Vulkan API implementation. Unlike what some sites have been reporting, you should not download it to play games that use the Vulkan API, like DOOM. In short, it is designed for developers, not end-users. The goal is to provide correct results when software interacts with the driver, not the best gaming performance or anything like that.

khronos-2016-vulkanlogo2.png

In a little more detail, it looks like 376.80 implements the Vulkan 1.0.39.1 SDK. This update addresses two issues with accessing devices and extensions, under certain conditions, when using the 1.0.39.0 SDK. 1.0.39.0 was released on January 23rd, and thus it will not even be a part of current video games. Even worse, it, like most graphics drivers for software developers, is based on the old, GeForce 376 branch, so it won’t even have NVIDIA’s most recent fixes and optimizations. NVIDIA does this so they can add or change the features that Vulkan developers require without needing to roll-in patches every time they make a "Game Ready" optimization or something. There is no reason to use this driver unless you are developing Vulkan applications, and you want to try out the new extensions. It will eventually make it to end users... when it's time.

If you are wishing to develop software using Vulkan’s bleeding-edge features, then check out NVIDIA’s developer portal to pick up the latest drivers. Basically everyone else should use 378.49 or its 378.57 hotfix.

Source: NVIDIA