Subject: Graphics Cards | May 23, 2018 - 06:21 PM | Tim Verry
Tagged: pascal, nvidia, GP107, GDDR5, budget
NVIDIA recently quietly launched a new budget graphics card that neatly slots itself between the GTX 1050 and the GTX 1050 Ti. The new GTX 1050 3GB, as the name suggests, features 3GB of GDDR5 memory. The new card is closer to the GTX 1050 Ti than the name would suggest, however as it uses the same 768 CUDA cores instead of the 640 of the GTX 1050 2GB. The GDDR5 memory is where the card differs from the GTX 1050 Ti though as NVIDIA has cut the number of memory controllers by one along with the corresponding ROPs and cache meaning that the new GTX 1050 3GB has a smaller memory bus and less memory bandwidth than both the GTX 1050 2GB and GTX 1050 Ti 4GB.
Specifically, the GTX 1050 with 3GB GDDR5 has a 96-bit memory bus that when paired with 7 Gbps GDDR5 results in maximum memory bandwidth of 84 GB/s versus the other previously released cards' 128-bit memory buses and 112 GB/s of bandwidth.
Clockspeeds on the new GTX 1050 3GB start are a good bit higher than the other cards though with the base clocks starting at 1392 MHz which is the boost clock of the 1050 Ti and running up to 1518 MHz boost clockspeeds. Thanks to the clockspeeds bumps, the theoretical GPU performance of 2.33 TFLOPS is actually higher than the GTX 1050 Ti (2.14 TFLOPS) and existing GTX 1050 2GB (1.86 TFLOPS) though the reduced memory bus (and loss of a small amount of ROPs and cache) will hold the card back from surpassing the Ti variant in most workloads – NVIDIA needs to maintain product segmentation somehow!
|NVIDIA GTX 1050 2GB||NVIDIA GTX 1050 3GB||NVIDIA GTX 1050 Ti 4GB||AMD RX 560 4GB|
|GPU Cores||640||768||768||896 or 1024|
|TFLOPS||1.86||2.33||2.14||up to 2.6|
|Memory||2GB GDDR5||3GB GDDR5||4GB GDDR5||2GB or 4GB GDDR5|
|Memory Clockspeed||7 Gbps||7 Gbps||7 Gbps||7 Gbps|
|Memory Bandwidth||112 GB/s||84 GB/s||112 GB/s||112 GB/s|
|TDP||75W||75W||75W||60W to 80W|
The chart above compares the specifications of the GTX 1050 3GB with the GTX 1050 and the GTX 1050 Ti on the NVIDIA side and the AMD RX 560 which appears to be its direct competitor based on pricing. The new 3GB GTX 1050 should compete well with AMD's Polaris 11 based GPU as well as NVIDIA's own cards in the budget gaming space where hopefully the downside of a reduced memory bus will at least dissuade cryptocurrency miners from adopting this card as an entry level miner for Ethereum and other alt coins giving gamers a chance to buy something a bit better than the GTX 1050 and RX 550 level at close to MSRP while the miners fight over the Ti and higher variants with more memory and compute units.
NVIDIA did not release formal pricing or release date information, but the cards are expected to launch in June and prices should be around $160 to $180 depending on retailer and extra things like fancier coolers and factory overclocks.
What are your thoughts on the GTX 1050 3GB? Is it the bastion of hope budget gamers have been waiting for? hehe Looking around online it seems pricing for these budget cards has somewhat returned to sane levels and hopefully alternative options like these aimed at gamers will help further stabilize the market for us DIYers that want to game more than mine. I do wish that NVIDIA could have changed the name a bit to better differentiate the card, maybe the GTX 1050G or something but oh well. I suppose so long as the 640 CUDA core GTX 1050 doesn't ever get 3GB GDDR5 at least gamers will be able to tell them apart by the amount of memory listed on the box or website.
Subject: Graphics Cards | May 13, 2017 - 11:46 PM | Tim Verry
Tagged: SFF, pascal, nvidia, Inno3D, GP107
Hong Kong based Inno3D recently introduced a single slot graphics card using NVIDIA’s mid-range GTX 1050 Ti GPU. The aptly named Inno3D GeForce GTX 1050 Ti (1-Slot Edition) combines the reference clocked Pascal GPU, 4GB of GDDR5 memory, and a shrouded single fan cooler clad in red and black.
Around back, the card offers three display outputs including a HDMI 2.0, DisplayPort 1.4, and DVI-D. The single slot cooler is a bit of an odd design with an thin axial fan rather than a centrifugal type that sits over a fake plastic fin array. Note that these fins do not actually cool anything, in fact the PCB of the card does not even extend out to where the fan is; presumably the fins are there primarily for aesthetics and secondarily to channel a bit of the air the fan pulls down. Air is pulled in and pushed over the actual GPU heatsink (under the shroud) and out the vent holes next to the display connectors. Air is circulated through the case and is not actually exhausted like traditional dual slot (and some single slot) designs. I am curious how the choice of fan and vents will affect cooling performance.
Overclocking is going to be limited on this card, and it comes out-of-the-box clocked at NVIDIA reference speeds of 1290 MHz base and 1392 MHz boost for the GPU’s 768 cores and 7 GT/s for the 4GB of GDDR5 memory. The card measures 211 mm (~8.3”) long and should fit in just about any case. Since it pulls all of its power from the slot, it might be a good option for those slim towers OEMs like to use these days to get a bit of gaming out of a retail PC.
Inno3D is not yet talking availability or pricing, but looking at there existing lineup I would expect a MSRP around $150.
Subject: Graphics Cards | October 25, 2016 - 01:21 PM | Jeremy Hellstrom
Tagged: pascal, nvidia, msi, GTX 1050 Ti, gtx 1050, GP107
The Guru of 3D tested out MSI's GeForce GTX 1050 and 1050 Ti, with MSRP's of $109 and $139 respectively. The non-Ti version has the lowest count of Texture Mapping Units of this generation but a higher GPU frequency that the Ti model, it also has the smallest amount of memory at 2GB though at least it is clocked the same in both models. DirectX 12 testing offers variable results, in many games the two are bookends to the RX 460 with the GTX 1050 a bit slower and the 1050 Ti a bit faster but this does not hold true in all games. DirectX 11 results were more favourable for this architecture, the two cards climbed in the rankings with the 1050 Ti offering acceptable performance. Check out their full review here.
"Last week Nvidia announced the GeForce GTX 1050 series, with two primary models. In this article we'll review the MSI GeForce GTX 1050 and 1050 Ti Gaming X, two graphics cards aimed at the budget minded consumer. We say budget minded as these cards are very affordable and positioned in an attractive 109 and 139 dollar (US) segment."
Here are some more Graphics Card articles from around the web:
- Sub-$150 Pascal: NVIDIA GeForce GTX 1050 & GTX 1050 Ti Review @ Techgage
- The NVIDIA GTX 1050 Ti & GTX 1050 Review @ Hardware Canucks
- MSI GTX 1050 Gaming X 2G Review @ OCC
- MSI GTX 1050 Ti Gaming X 4 GB @ techPowerUp
- MSI GTX 1050 Gaming X 2 GB @ techPowerUp
- Nvidia's GeForce GTX 1060 @ The Tech Report
- Gigabyte GTX 1070 Xtreme Gaming 8 GB @ techPowerUp
- MSI RX 470 Gaming X 8G Review @ OCC
- The XFX Radeon RX 470 RS Black Edition @ Tech ARP
Subject: Graphics Cards | October 2, 2016 - 12:12 PM | Sebastian Peak
Tagged: rumor, report, pascal, nvidia, GTX 1050 Ti, graphics card, gpu, GP107, geforce
A report published by VideoCardz.com (via Baidu) contains pictures of an alleged NVIDIA GeForce GTX 1050 Ti graphics card, which is apparently based on a new Pascal GP107 GPU.
Image credit: VideoCardz
The card shown is also equipped with 4GB of GDDR5 memory, and contains a 6-pin power connector - though such a power requirement might be specific to this particular version of the upcoming GPU.
Image credit: VideoCardz
Specifications for the GTX 1050 Ti were previously reported by VideoCardz, with a reported GPU-Z screenshot. The card will apparently feature 768 CUDA cores and a 128-bit memory bus, with clock speeds (for this particular sample) of 1291 MHz base, 1392 MHz boost (with some room to overclock, from this screenshot).
Image credit: VideoCardz
An official announcement for the new GPU has not been made by NVIDIA, though if these PCB photos are real it probably won't be far off.