Subject: Graphics Cards | December 9, 2018 - 05:40 PM | Tim Verry
Tagged: pascal, msi, GP104, GeForce GTX 1060, armor
MSI is launching a refreshed GTX 1060 graphics card that uses GDDR5X for its 6GB of video memory rather than GDDR5. The aptly named GTX 1060 Armor 6GD5X OC graphics card shares many features of the existing Armor 6G OC (and OCV1) that the new card is a refresh of including the dual TORX fan Armor 2X cooler and maximum 4 display outputs among three DisplayPort 1.4, one HDMI 2.0b, and one DVI-D.
The new Pascal-based GPU in the upcoming graphics card is reportedly a cut-down variant of NVIDIA's larger GP104 chip rather than the GP106-400 used for previous GTX 1060s, but the core count and other compute resources remain the same at 1,280 CUDA cores, 80 TMUs, 48 ROPs, and a 192-bit memory bus. Clock speeds have been increased slightly versus reference specifications however at 1544 MHz base and up to 1759 MHz boost. The GPU is paired with 6 GB of GDDR5X that is curiously clocked at 8 GHz. The memory more than likely has quite a bit of overclocking headroom vs GTX 1060 6GB cards using GDDR5 but it appears MSI is leaving those pursuits for enthusiasts to explore on their own.
MSI is equipping its GTX 1060 Armor 6GD5X OC graphics cards with a 8+6 pin PCI-E power connection setup which should help overclockers push the cards as far as they can (previous GTX 1060 Armor OC cards had only a single 8-pin). Looking at the specification page the new card will be slightly shorter but with a thicker cooler at 276mm x 140mm x 41mm than the GDDR5-based card. As part of the Armor series the card has a white and black design like its predecessors.
MSI has not yet released pricing or availability information but with the GDDR5-based graphics cards priced at around $275 I would suspect the MSI GTX 1060 Armor 6GD5X OC to sit around $290 at launch.
I am curious how well new GTX 1060 graphics cards will perform when paired with faster GDDR5X memory and how the refreshed cards stack up against AMD's refreshed Polaris 30 based RX 590 graphics cards.
- The GeForce GTX 1060 6GB Review - GP106 Starting at $249
- NVIDIA GeForce GTX 1060 Preview: Pascal with GP106
Subject: Graphics Cards | January 25, 2017 - 03:37 PM | Jeremy Hellstrom
Tagged: windforce, factory overclocked, GTX 1060 G1 GAMING 6G, GeForce GTX 1060, gigabyte
In their testing [H]ard|OCP proved that the Windforce cooler is not the limiting factor when overclocking Gigabyte's GTX 1060 G1 Gaming G6, even at their top overclock of 2.1GHz GPU, 9.4GHz memory the temperature never reached 60C. They did have some obstacles reaching those speeds, the cards onboard Gaming mode offered an anemic boost and in order to start manually overclocking this card you will need to install the XTREME ENGINE VGA Utility. Once you have that, you can increase the voltage and clocks to find the limits of the card you have, which should offer a noticeable improvement from its performance straight out of the box.
"We’ve got the brand new GIGABYTE GeForce GTX 1060 G1 GAMING 6G video card to put through the paces and find out how well it performs in games and overclocks. We will compare its highest overclock with one of the best overclocks we’ve achieved on AMD Radeon RX 480 to put it to the test. How will it stand up? Let’s find out."
Here are some more Graphics Card articles from around the web:
- GTX 1070 Overclocking Guide @ OCC
- Arctic Accelero Hybrid III-140 GPU Cooler @ Kitguru
- OCC's Top 3 Video Cards of 2016 @ OCC
- Benchmarking Radeon Open Compute ROCm 1.4 OpenCL @ Phoronix
Subject: Graphics Cards | August 12, 2016 - 06:33 PM | Sebastian Peak
Tagged: report, nvidia, gtx 1060 3gb, gtx 1060, GeForce GTX 1060, geforce, cuda cores
NVIDIA will offer a 3GB version of the GTX 1060, and there's more to the story than the obvious fact that is has half the frame buffer of the 6GB version available now. It appears that this is an entirely different product, with 128 fewer CUDA cores (1152) than the 6GB version's 1280.
Image credit: VideoCardz.com
Boost clocks are the same at 1.7 GHz, and the 3GB version will still operate with a 120W TDP and require a 6-pin power connector. So why not simply name this product differently? It's always possible that this will be an OEM version of the GTX 1060, but in any case expect slightly lower performance than the existing version even if you don't run at high enough resolutions to require the larger 6GB frame buffer.
Subject: Graphics Cards | July 26, 2016 - 12:36 AM | Tim Verry
Tagged: windforce, pascal, gigabyte, GeForce GTX 1060
In a recent press release, Gigabyte announced that it will soon be adding four new GTX 1060 graphics cards to its lineup. The new cards feature Windforce series coolers and custom PCBs. At the high end is the GTX 1060 G1 Gaming followed by the GTX 1060 Windforce OC, small form factor friendly GTX 1060 Mini ITX OC, and the budget minded GTX 1060 D5. While the company has yet to divulge pricing or availability, the cards should be out within the next month or two.
All of the upcoming cards use a custom design that uses a custom PCB and power phase setup paired with Gigabyte's dual – or in the case of the Mini ITX card – single fan Windforce air cooler. Unfortunately, exact specifications for all of the cards except the high end model are unknown including core and memory clocks. The coolers use a dual composite heatpipe that directly touches the GPU to pull heat away and is dissipated by an aluminum fin stack. The fans are 90mm on all of the cards with the dual fan models using a design that has each fan spinning alternate directions of the other. The cards feature 6GB of GDDR5 memory as well as DVI, HDMI, and DisplayPort video outputs. For example, the Mini ITX OC graphics card (which is only 17cm long) and features two DVI, one HDMI, and one DP output.
More information is available on the GTX 1060 G1 Gaming. This card is a dual slot dual fan design with a 6+1 power phase (reference is 3+1) powered by a single 8-pin power connector. The fans are shrouded and there is a metal backplate to aid in stability and cooling. Gigabyte claims that its "GPU Gauntlet" technology ensures users get heavily overclockable chips thanks to sorting and using the most promising chips.
The 16nm Pascal GPU is factory overclocked to 1847 MHz boost and 1620 MHz base clockspeeds in OC mode and 1809 MHz boost and 1594 MHz base in gaming mode. Users will be able to use the company's Xtreme Engine software to dial up the overclocks further as well as mess with the RGB LEDs. For comparison, the reference clockspeeds are 1708 MHz boost and 1506 MHz base. Gigabyte has left the 6GB of GDDR5 memory untouched at 8008 MHz.
The other cards should have similarly decent factory overclocks, but it is hard to say exactly what they will be out of the box. While I am not a big fan of the aesthetics, the Windforce coolers should let users push Pascal fairly far (for air cooling).
I would guess that the Gigabyte GTX 1060 G1 Gaming will MSRP for just above $300 while the lower end cards will be around $260 (the Mini ITX OC may be at a slight premium above that).
What do you think about Gigabyte's new cards?
Subject: Graphics Cards | July 20, 2016 - 12:19 PM | Sebastian Peak
Tagged: VideoCardz, rumor, report, nvidia, GTX 1070M, GTX 1060M, GeForce GTX 1070, GeForce GTX 1060, 2048 CUDA Cores
Specifications for the upcoming mobile version of NVIDIA's GTX 1070 GPU may have leaked, and according to the report at VideoCardz.com this GTX 1070M will have 2048 CUDA cores; 128 more than the desktop version's 1920 cores.
The report comes via BenchLife, with the screenshot of GPU-Z showing the higher CUDA core count (though VideoCardz mentions the TMU count should be 128). The memory interface remains at 256-bit for the mobile version, with 8GB of GDDR5.
VideoCardz reported another GPU-Z screenshot (via PurePC) of the mobile GTX 1060, which appears to offer the same specs of the desktop version, at a slightly lower clock speed.
Finally, this chart was provided for reference:
Image credit: VideoCardz
Note the absence of information about a mobile variant of the GTX 1080, details of which are still unknown (for now).
Subject: Graphics Cards | June 28, 2016 - 10:26 AM | Sebastian Peak
Tagged: nvidia, GeForce GTX 1060, GTX1060, rumor, report, leak, pascal, graphics card, video card
A report from VideoCardz.com shows what appears to be an NVIDIA GeForce GTX 1060 graphics card with a cooler similar to the "Founders Edition" GTX 1080/1070 design.
Is this the GTX 1060 reference design? (Image via VideoCardz.com)
The image comes via Reddit (original source links in the VideoCardz post), and we cannot verify the validity of the image - though it certainly looks convincing to this writer.
So what does VideoCardz offer as to the specifications of this GTX 1060 card? Quoting from the post:
"NVIDIA GeForce GTX 1060 will most likely use GP106 GPU with at least 1280 CUDA cores. Earlier rumors suggested that GTX 1060 might get 6 GB GDDR5 memory and 192-bit memory bus."
We await official word on the GTX 1060 from NVIDIA, which VideoCardz surmises "is expected to hit the market shortly after Radeon RX 480".