ioSafe Launches 5-Bay Xeon-Based 'Server 5' Fireproof NAS

Subject: Storage | March 8, 2017 - 09:58 PM |
Tagged: xeon, raid, NAS, iosafe, fireproof

ioSafe, makers of excellent fireproof external storage devices and NAS units, has introduced what they call the 'Server 5':

Server5-front2-.jpg

The Server 5 is a completely different twist for an ioSafe NAS. While previous units have essentially been a fireproof drive cage surrounding Synology NAS hardware, the Server 5 is a full blown Xeon D-1520 or D-1521 quad core HT, 16GB of DDR4, an Areca ARC-1225-8i hardware RAID controller (though only 5 ports are connected to the fireproof drive cage). ioSafe supports the Server 5 with Windows Server 2012 R2 or you can throw your preferred flavor of Linux on there. The 8-thread CPU and 16GB of RAM mean that you can have plenty of other services running straight off of this unit. It's not a particularly speedy CPU, but keep in mind that the Areca RAID card offloads all parity calculations from the host.

Server5-rear.jpg

Overall the Server 5 looks nearly identical to the ioSafe 1515+, but with an extra inch or two of height added to the bottom to accommodate the upgraded hardware. The Server 5 should prove to be a good way to keep local enterprise / business data protected and available immediately after a disaster. While only the hard drives will be protected in a fire, they can be popped out of the charred housing and shifted to a backup Server 5 or just migrated to another Areca-driven NAS system. For those wondering what a typical post-fire ioSafe looks like, here ya go:

1515+.jpg

Note how clean the cage and drives are (and yes, they all still work)!

Press blast appears after the break.

Source: ioSafe
Subject: Storage

ioSafe: Introduction and Internals

Introduction:

Cloud storage is all the talk these days, and our own Tim Verry has been hard at work detailing as much of it as he can keep up with. While all of us at PCPer currently use cloud based solutions for many of the day-to-day goings on, it's not for everyone, and it tends to not be for very large chunks of data, either. Sometimes local storage is just the way to go – especially when you want to be the one in absolute control of the reliability and integrity of your data.

The general rule for proper backups is to have your local copy, a local backup (RAID is *not* a backup), and an additional off-site backup to cover things like theft, fires or floods. So lets say you simply have too much sensitive data for your internet connection to support bulk transferring to an off-side / cloud storage location. Perhaps the cloud storage for that much space is simply cost prohibitive, or your data is sensitive enough that – despite encryption – you don't want it leaving your network and/or premesis? Perhaps you're just stubborn and want only one backup of your data? I think I might have the answer you've been looking for – behold the ioSafe SoloPRO:

120205-095626-8.39.jpg

What is this thing, you may ask? On the inside it's one of the available 1, 2, 3, or even 4TB 3.5" hard drives. On the outside it's a very durable and solid steel enclosure. The hard drive is wrapped in a thermally conductive yet water resistant 'HydroSafe' foil that enables water resistance rated at a 10 ft depth for 3 days with no data loss. The bonus, however, is not the water resistance - that featuer is present primarily to battle the side effects of something much more drastic - the ioSafe is fire-proof. That feature comes from what sits between the steel casing and the shrink wrapped hard drive - something ioSafe calls a DataCast (pictured below):

Internals:

I'm going to break from my normal warranty voiding and show a photo from this past Storage Visions conference at the Consumer Electonics Show, where an ioSafe was already cracked open for our viewing pleasure:

1-int-1.JPG

Read on for the full review!