Subject: Storage | February 14, 2017 - 06:51 PM | Jeremy Hellstrom
Tagged: tlc, slc, MX300, micron, imft, Dynamic Write Acceleration, DWA, crucial, 3DNAND, 3d nand
Last June Al took a look at the Crucial MX300 750GB and its ability to switch its cache dynamically from TLC to SLC, helping Crucial improve how they implemented this feature along the way. It proved to be a great value for the money; not the best performing drive but among the least expensive on the market. Crucial has since expanded the lineup and Hardware Canucks took a look at the 2TB model. This model has more than just a larger pool of NAND, the RAM cache has been doubled up to 1GB and the dynamic cache has more space to work in as well. Take a look at this economy sized drive in their full review.
"Crucial's newest MX300 series continues to roll on with a new 2TB version. This SSD may be one of the best when it comes to performance, price and capacity all combined into one package."
Here are some more Storage reviews from around the web:
- Crucial MX300 525GB SSD Review @ Neoseeker
- Silicon Power S57 240GB @ eTeknix
- Silicon Power S56 240GB @ eTeknix
- Transcend ESD400 256GB External SSD @ Kitguru
- QNAP TurboNAS TS-1635-8G 16-bay 10GbE NAS Server Review @ NikKTech
- Drobo 5c 5-Bay USB Type-C Self-Managing DAS @ eTeknix
Introduction, Dynamic Write Acceleration, and Packaging
Micron joined Intel in announcing their joint venture production of IMFT 3D NAND just a bit over a year ago. The industry was naturally excited since IMFT has historically enabled relatively efficient production, ultimately resulting in reduced SSD prices over time. I suspect this time things will be no different as IMFT's 3D Flash has been aiming high die capacities since its inception, and I suspect their second generation will *double* per-die capacities while keeping speeds reasonable thanks to a quad-plane design implemented from the start of this endeavor. Of course, I'm getting ahead of myself a bit as there are no consumer products sporting this flash just yet - well not until today at least:
Marketed under Micron's consumer brand Crucial, the MX300 is their first entrant into the consumer space, as well as the first consumer SSD sporting IMFT 3D NAND. Crucial is known for their budget-minded SSDs, and for the MX300 they chose to go with the best cost/GB they could manage with what they had to work with. That meant putting this new 3D NAND into TLC mode. Now there are many TLC haters out there, but remember this is 3D NAND. Samsung's 850 EVO can exceed 500 MB/sec writes to TLC at its 500GB capacity point, and this MX300 is a product that is launching with *only* a 750GB capacity, so its TLC speed should be at least reasonable.
(the return of) Dynamic Write Acceleration
Dynamic Write Acceleration in action during a sequential fill - that last slowest part was my primary concern for the mX300.
TLC is not the only story here because Crucial has included their Dynamic Write Acceleration (DWA) technology into the MX300. This is a tech where the SSD controller is able to dynamically switch flash programming modes of the flash pool, doing so at the block level. This appears to be a feature unique to IMFT flash, as every other 'hybrid' SSD we have tested had a static SLC cache area. DWA's ability to switch flash modes on-the-fly has always fascinated me on paper, but I just haven't been impressed by Micron's previous attempts to implement it. The M600 was a bit all over the place on its write consistency, and that SSD was flipping blocks between SLC and MLC. With the MX300 flipping between SLC and *TLC*, there was a possibility of far more noticeable slow downs in the cases where large writes were taking place and the controller was caught trying to scavenge space in the background.
New Latency Percentile vs. legacy IO Percentile, shown here highlighting a performance inconsistency seen in the Toshiba OCZ RD400. Note which line more closely represents the Latency Distribution (gray) also on this plot.
Subject: Storage, Shows and Expos | January 9, 2015 - 03:21 PM | Allyn Malventano
Tagged: Storage Executive, SM2246EN, MX200, Dynamic Write Acceleration, DWA, crucial, CES 2014, CES, BX100
At CES, I took a trip to the LVCC to be briefed us on a pair of new Crucial SSD models:
The new MX200 is an evolution of the previous MX100 line, with the most notable addition being Dynamic Write Acceleration. DWA can flip dies between SLC and MLC mode on-the-fly, and is detailed in our previous write-up of the Crucial M600 SSD. While the performance was a bit inconsistent in our M600 review, there have likely been improvements if Crucial is putting this feature into their mainstream consumer line. Also interesting is how Crucial intends to package this product in mSATA and M.2 form factors - these have historically been reserved for their higher end M550 line and were not available in the MX100.
Another addition is the BX100. For this drive, Crucial has decided on the Silicon Motion 2246EN, which should be able to let them get the costs lower than what is possible with the Marvell controller. As a budget targeted model, this one will only be available in the 2.5" SATA form factor. Below are the briefed specs from these two products;
Another addition is a software solution dubbed 'Crucial Storage Executive'. This is basically their 'Toolbox' solution and handles reporting of S.M.A.R.T. data as well as firmware updates. Crucial has chosen to go the unique route of configuring this tool as a background service that is accessed through a web browser on the host system (most competing solutions are a standalone application).
The best part of this launch is the pricing. Crucial SSDs have always been highly cost competitive, but look at that launch pricing on the BX100:
That's $0.40/GB for what looks to be a very decent SSD. These two models are set to ship Q1 2015, so we'll likely see them within the next month or so.
The full press blast for these pair of SSD releases appears after the break.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Storage | October 6, 2014 - 02:51 PM | Jeremy Hellstrom
Tagged: ssd, slc, mlc, micron, M600, Dynamic Write Acceleration
The Tech Report took a different look at Micron's M600 SSD than Al did in his review. Their benchmarks were focused more on a performance comparison versus the rest of the market, with over two dozen SSDs listed in their charts. As you would expect the 1TB model outperformed the 256GB model but it was interesting to note that the 256GB MX100 outperformed the newer M600 in many tests. In the final tally the new caching technology helped the 256GB model perform quite well but it was the 1TB model, which supposedly lacks that technology proved to be one of the fastest they have tested.
"Micron's new M600 SSD has a dynamic write cache that can treat any block on the drive as high-speed SLC NAND. This unique feature is designed to help lower-capacity SSDs keep up with larger drives that have more NAND-level parallelism, and we've tested the 256GB and 1TB versions to see how well it works."
Here are some more Storage reviews from around the web:
- MyDigitalSSD BP4e mSATA SSD @ The SSD Review
- Top 10 SSDs: Price, performance and capacity @ The Register
- Micron M600 M.2 SATA SSD @ The SSD Review
- Some thoughts on the performance of SSD RAID 0 arrays @ Hardware Secrets
- Transcend SSD370 128GB SSD Review @ Legit Reviews
- Micron M600 SSD @ The SSD Review
- QNAP TS-653 Pro @ Legion Hardware
- QNAP SilentNAS HS-251 NAS Server Review @ NikKTech
- Mach Xtreme MX-ES Ultra SLC USB 3.0 Flash Drive @ The SSD Review
- Silicon Power Marvel M70 64GB USB 3.0 Flash Drive Review @ NikKTech
Introduction and Specifications
Today Micron lifted the review embargo on their new M600 SSD lineup. We covered their press launch a couple of weeks ago, but as a recap, the headline new feature is the new Dynamic Write Acceleration feature. As this is a new (and untested) feature that completely changes the way an SSD must be tested, we will be diving deep on this one later in this article. For the moment, let's dispose with the formalities.
Here are the samples we received for testing:
It's worth noting that since all M600 models use 16nm 128Gbit dies, packaging is expected to have a negligible impact on performance. This means the 256GB MSATA sample should perform equally to its 2.5" SATA counterpart. The same goes for comparisons against M.2 form factor units. More detail is present in the specs below:
Highlights from the above specs are the increased write speeds (no doubt thanks to Dynamic Write Acceleration) and improved endurance figures. For reference, the prior gen Micron models were rated at 72TB (mostly regardless of capacity), so seeing figures upwards of 400TB indicates Micron's confidence in their 16nm process.
Sorry to disappoint here, but the M600 is an OEM targeted drive, meaning its 'packaging' will likely be the computer it comes installed in. If you manage to find it through a reseller, it will likely come in OEM-style brown/white box packaging.
We have been evaluating these samples for just under a week and have logged *many* hours on them, so let's get to it!