Wiith GIGABYTE's Aorus X399 Designare EX you get what you pay for

Subject: Motherboards | March 29, 2018 - 02:35 PM |
Tagged: gigabyte, designare EX, X399, aorus

Speaking of the X399 Designare EX, [H]ard|OCP recently reviewed this high end Threadripper motherboard.  The features of this motherboard are as impressive as the price, you get eight DDR4 slots, three M.2 ports, 13 USB 3.1 slots with a mix of Gen 1 and 2 though only a single Type-C, dual wired NICs plus WiFi and Bluetooth, not to mention four PCIe 3.0 16x slots.  All of these features do add to the complexity of setting up a system, especially when overclocking so read through the full review for hints on how best to set up your system.

1521197640843huzhoqh_1_9_l.jpg

"GIGABYTE’s X399 Designare EX is a rich, full featured solution for AMD’s Threadripper CPUs. At $370, this isn’t a budget-oriented offering. The thing people usually want to know when looking at motherboards in this price bracket is if such products are worth the extra cost. Read on to find out if this gaming and workstation offering is worthwhile."

Here are some more Motherboard articles from around the web:

Motherboards

 

Source: [H]ard|OCP

GIGABYTE's X399 DESIGNARE EX

Subject: Motherboards | October 30, 2017 - 01:56 PM |
Tagged: X399, Threadripper, gigabyte, designare EX, amd

Gigabyte have updated their lineup of X399 Threadripper boards with the new Designare EX.  It sports a long list of features including dual Intel GbE LAN, Dual Band 802.11ac WiFi, Bluetooth 4.2, three M.2 slots, ALC1220 audio with 120dB SNR and a USB 3.1 Type-C port on the back as well as support for a second front port once cases start including them.

dx.png

Two of the M.2 slots lie between PCIe slots, with the third under the lit heatshield on the lower right of the board so do make sure to install them before the GPU.  The board is great for miners and gamers alike, the four top PCIe 3.0 slots can provide x16/x16/x8/x8 simultaneously thanks to Threadrippers huge count of PCIe lanes; the bottom most slot offers x4 speeds for an SSD. 

pcie.png

You can read more about their Smart Fan 5 cooling, M.2 heatsinks, advanced power features and RGBs in the full press release.

Source: Gigabyte

Gigabyte Designs New X399 Designare EX Motherboard

Subject: Motherboards | October 5, 2017 - 12:35 AM |
Tagged: X399, tr4, Threadripper, gigabyte, designare EX

Gigabyte has introduced the X399 Designare EX, a decked out ATX motherboard with silver colored armor (including a large backplate) and a blue LED overlay over the PCH. The X399 motherboard is based on the same platform as the already launched Aorus X399 Gaming 7, but with a silver-metallic aesthetic and toned-down LEDs (though you can add RGB LED strips via headers.

The X399 Designare EX surrounds the Threadripper TR4 socket with eight DIMM slots and an eight phase VRM setup with server grade chokes that pulls power from a set of 8-pin and 4-pin 12V EPS connectors. The power phases are covered by heatsinks connected by a heatpipe with the heatsink sitting behind the rear I/O including a small fan for active cooling (which should help ensure some airflow for the VRMs if you are watercooling). Interestingly the IO plate for the rear IO is part of the motherboard rather than being a separate piece that comes in the box. A large backplate ensures the board will not warp over time even with large and heavy CPU coolers and graphics cards installed.

Gigabyte X399 Designare EX.jpg

The motherboard has five PCI-E x16 slots (x16/x8/x16/x8 for 4-way GPU configurations) and three M.2 slots with heatspreaders (two in between the PCI-E slots and one below the PCH heatsink). Storage also includes 8 SATA 6 Gbps ports (four from CPU, and four from chipset). USB includes two USB 3.1 Gen 2, 10 USB 3.1 Gen 1, and USB 2.0 ports via headers. On board chipsets include Intel-based 802.11ac, Bluetooth 4.2, and two Gigabyte Ethernet (Intel i211AT) NICs. As for audio, the X399 Designare EX uses the Realtek ALC 1220 (120 dBA SNR) chipset paired with high end WIMA and Nichicon caps, Op Amps, and ground layer isolation. There are 9 temperature sensor headers and 8 fan headers for air or water gear.

Gigabyte has not yet released pricing or availability but I would expect it to be at least $430. Personally, I am a fan of the design of this board and it should at least look good in builds! As for stock performance, overclocking support, and CMOS battery placement we will have to wait for the reviews!

Source: Gigabyte

The X99 Designaire EX, as expensive as the name implies

Subject: Motherboards | December 5, 2016 - 03:02 PM |
Tagged: gigabyte, Intel X99, designare EX

Gigabyte's Designare EX is even more full of extras and add-ins than the non-EX model, featuring everything but an easily accessible CMOS battery.  Ten SATA ports, although only six are RAID capable, one U.2 and a pair of M.2 ports are available and there is an Avago PEX8747 assuming to help your CPU provide enough PCIe lanes for everything.  The USB Type-C port on the back is Thunderbolt 3 rated and there is a DisplayPort input on the back panel so you can use your graphics card to provide output for that Thunderbolt connection.  The Tech Report loved the look of the board but ran into some hurdles when using and tweaking it, check out the full review for details.

punchier-lores.jpg

"Broadwell-E CPUs brought a new wave of X99 motherboards to go with them at price points both high and low. The GA-X99-Designare EX shows what's possible when Gigabyte's motherboard designers get to pull out all the stops. We put this board to the test to see what it's like to live the high life."

Here are some more Motherboard articles from around the web:

Motherboards