CORSAIR Launches DOMINATOR PLATINUM Special Edition Torque

Subject: Memory | May 11, 2017 - 02:43 PM |
Tagged: corsair, Corsair Dominator Platinum, ddr4, special edition torque, bulldog, DDR4-3600

Corsair have launched a new limited edition line of DDR4-3600 DIMMs, the DOMINATOR PLATINUM Special Edition Torque.  The DIMMs feature brushed black aluminum heatsinks with orange accents and a heat-treated effect top bar.  They do indeed feature lighting for the LED addicted and will fit in with your other bright components.  They are XMP 2.0 certified for easy setup, or you can overclock to your own preferences as these DIMMs went through comprehensive testing.

pretty.jpg

As part of the release Corsair contracted case modder Lee Harrington to transform a Bulldog case into a classic hot rod.  It has a flaming paint job, pneumatic hood struts, working headlights and a whole lot of Torque; you can see the full gallery here.

vroom.jpg

You can read the PR below the prices.

torque.PNG

FREMONT, CA – May 11th, 2017 - CORSAIR, a world leader in enthusiast memory, high-performance gaming hardware and PC components today announced the immediate availability of its new DOMINATOR PLATINUM Special Edition Torque DDR4 memory. Inspired by those for whom speed is an obsession, each module features a uniquely heat-treated effect top bar, combining the iconic DOMINATOR PLATINUM design with the aesthetic of high-performance engines. Completed by a brushed black aluminum heatsink, stunning built-in lighting and orange accents, each kit is individually numbered using high precision laser engraving, guaranteeing exclusivity. Available in limited quantities, DOMINATOR PLATINUM Special Edition Torque DDR4 memory is built for speed – inside and out.

Fully compatible with the latest Intel® X99 and 200-series motherboards, each module is individually hand screened for added quality assurance and overclocking headroom. For the speed-obsessed looking to push their system to the limit and reach peak performance, DOMINATOR PLATINUM Special Edition’s custom 10-layer PCB provides superior signalling for greater overclocking potential, allowing every DOMINATOR PLATINUM Special Edition Torque module to be safely overclocked to at least 3,600MHz. What’s more, with CORSAIR’s patented DHX cooling technology, the aluminum heat-spreader is built right into the PCB, ensuring rapid heat dissipation and lower temperatures.

To celebrate the launch of DOMINATOR PLATINUM Special Edition Torque, CORSAIR commissioned renowned case modder Lee Harrington to create a chassis worthy of housing these limited edition DDR4 modules. Starting with a CORSAIR BULLDOG SFF kit, Lee created a stunning homage to 60’s hot-rods, complete with flaming paint job, pneumatic hood struts and working headlights. To see more of this amazing system build, check out the full builder’s gallery at the link below.

Source: Corsair

High frequency RAM on Kaby Lake

Subject: Memory | December 23, 2016 - 01:26 PM |
Tagged: Vengeance LPX, kaby lake, Intel, DDR4-3600, corsair, core i7 7700k

[H]ard|OCP had a chance to try out Corsair's upcoming Vengeance LPX 3600MHz DDR4 on a Kaby Lake based system.  The XMP settings for this DDR4 were 3600MHz with timings @ 18-19-19-39-2T and the system booted with no problems at these defaults, an improvement from some scenarios with Skylake based systems.  Running Prime95 for over a day posed no problem for the system, however Memtest86 did until the RAM voltage was bumped up to 1.41v from the default 1.36v at which point it could pass the tests with no problems.  This shows some promise for overclocking addicts planning on upgrading to the refreshed Intel chip.

14824547975KFHm7dcBH_1_2_l.jpg

"We were lucky enough to get our hands on a new set of Corsair Vengeance LPX 3600MHz RAM this week and we immediately put it work with the new Intel Kaby Lake Core i7-7700K processor that is to be launched next month."

Here are some more Memory articles from around the web:

Memory

Source: [H]ard|OCP

Driving your RAM at 3.6GHz

Subject: Memory | September 22, 2015 - 06:08 PM |
Tagged: Ripjaws V, G.Skill, DDR4-3600, ddr4

Bringing the frequency of your RAM up to 3600MHz certainly has an effect on price compared to DIMMs clocked at 2666MHz but does the performance justify that cost?  The timings of 17-18-18-38 @ 2T are tight for RAM of this frequency, though not as tight as 15-15-15-35 but perhaps that gives you some room for overclocking?  As shown in TechPowerUp's review it is not quite that easy, for example many Intel Z170 boards simply don't support these frequencies and updating your BIOS should be your first step before working with these DIMMs.  Synthetic benchmarks benefited from the full speed of these DIMMs but when it comes to actual gaming the results are negligible, especially considering you will be paying roughly triple the price for these DIMMs.  On the other hand if you simply need to have the best components on the market in your system you should check out the full review.

goodies.jpg

"Intel's new Skylake platform comes with DDR4 at increased memory speeds, and the first to help us investigate the benefits of high-performance DDR4 is G.Skill's latest design, the Ripjaws V. Wrapped in a new look, these ultra-fast 3600 MHz modules push the limits of your Skylake CPU."

Here are some more Memory articles from around the web:

Memory

 

Source: techPowerUp