Subject: Storage | April 24, 2017 - 05:20 PM | Jeremy Hellstrom
Tagged: XPoint, srt, rst, Optane Memory, Optane, Intel, hybrid, CrossPoint, cache, 32GB, 16GB
At $44 for 16GB or $77 for a 32GB module Intel's Optane memory will cost you less in total for an M.2 SSD, though a significantly higher price per gigabyte. The catch is that you need to have a Kaby Lake Core system to be able to utilize Optane, which means you are unlikely to be using a HDD. Al's test show that Optane will also benefit a system using an SSD, reducing latency noticeably although not as significantly as with a HDD.
The Tech Report tested it differently, by sourcing a brand new desktop system with Kaby Lake Core APU that did not ship with an SSD. Once installed, the Optane drive enabled the system to outpace an affordable 480GB SSD in some scenarios; very impressive for a HDD. They also did peek at the difference Optane makes when paired with aforementioned affordable SSD in their full review.
"Intel's Optane Memory tech purports to offer most of the responsiveness of an SSD to systems whose primary storage device is a good old hard drive. We put a 32GB stick of Optane Memory to the test to see whether it lives up to Intel's claims."
Here are some more Storage reviews from around the web:
- Intel Optane Memory Review - 1.4GB/s Speed & 300K IOPS for $44 @ The SSD Review
- The Intel Optane Memory Module Review @ Hardware Canucks
- Kingston DCP1000 NVMe SSD Reaches 7GB/s @ Kitguru
- WD Blue 1,000 GiB SSD @ Hardware Secrets
- Synology DiskStation DS916+ 4-Bay NAS @ Kitguru
- Drobo 5N2 NAS @ Kitguru
- Kingston Ultimate GT 2TB Flash Drive @ The SSD Review
- Toshiba X300 6TB HDD @ Kitguru
Introduction, Specifications, and Requirements
Finally! Optane Memory sitting in our lab! Sure, it’s not the mighty P4800X we remotely tested over the past month, but this is right here, sitting on my desk. It’s shipping, too, meaning it could be sitting on your desk (or more importantly, in your PC) in just a matter of days.
The big deal about Optane is that it uses XPoint Memory, which has fast-as-lightning (faster, actually) response times of less than 10 microseconds. Compare this to the fastest modern NAND flash at ~90 microseconds, and the differences are going to add up fast. What’s wonderful about these response times is that they still hold true even when scaling an Optane product all the way down to just one or two dies of storage capacity. When you consider that managing fewer dies means less work for the controller, we can see latencies fall even further in some cases (as we will see later).