Computex 2017: Lian-Li Launching AIO Liquid Coolers With Raw Copper Radiators

Subject: Cases and Cooling | June 3, 2017 - 06:01 PM |
Tagged: water cooling, Lian-Li, LCS, copper radiator, copper, computex, cinsys, AIO

Guru3D made an interesting find at Lian-Li's Computex booth this year where they managed to take photos of a new all in one (AIO) liquid cooler that sports an all copper loop. Specifically, the company was showing off a new Lian-Li branded liquid cooler from Cinsys with a 240mm radiator. The "X-R240 Expandable water cooling heat radiating system" features a raw copper radiator surrounded by a metal shroud (reportedly aluminum) that houses 120mm fan mounts and a pump, large removable tubing, and a thin nickel plated copper CPU water block.

Lian-Li 240mm AIO Copper Cooler.jpg

Lian-Li X-R240 expandable water cooler. (Image credit: Guru3D)

Looking at the photos from Guru3D, the Lian-Li X-R240 AIO certainly looks classy and should perform fairly well with the copper block and copper radiator (which is nice to see in an AIO where aluminum is common). The large tubing appears to be fairly long enabling the radiator to be placed up to or in the front of a mid-tower case, though I am curious how flexible it will be in a smaller case in tight quarters (if I am remembering my watercooling correctly, the larger diameter should mean it will be less likely to kink though). Further, it looks like the tubing is removable and users will be able to expand the loop to add additional blocks and/or radiators which is nice though you should be careful to avoid adding non-copper (aluminum/silver/ect) components to the Lian-Li loop. Angled and/or swivel barbs on the CPU blocks would have been nice as well since the straight barbs on the thin CPU block could make installation more difficult.

The raw copper is a nice aesthetic touch, though once it is installed in your case and sitting behind fans it is going to be hard to see and Guru3D does note that over time the copper will oxidize and discolor. Still, it might be useful for modders to get that steam punk look and feel. Thankfully it looks like there is plastic (and maybe foam) separating the copper radiator from the aluminum shell/shroud though it's less of an issue since the outside of the radiator isn't going to be submerged in water (hopefully!).

The company will reportedly be releasing other models beyond the 240mm shown at Computex presumably by the same OEM (Cinsys). A 360mm radiator and some GPU blocks would be nice to see! Hopefully Morry or Sebastian can get one in for testing soon!

What are your thoughts on Lian-Li using raw copper? Do you prefer plated copper?

Source: Guru3D

Be Quiet! Shows Off New Silent Loop AIO Liquid Coolers

Subject: Cases and Cooling | September 29, 2016 - 12:38 AM |
Tagged: water cooling, liquid cooler, Intel, copper radiator, be quiet!, amd, AIO

Be Quiet!, a popular German manufacturer of PC cases and power supplies is jumping into the liquid cooling game with the introduction of its new Silent Loop all-in-one (AIO) liquid coolers. Through a partnership with Alphacool, Be Quiet! Is launching three new coolers with 120mm, 240mm, and 280mm radiators. It is not clear exactly when they will be arriving stateside but pricing is approximately $124, $143, and $170 respectively.

be quiet silent loop 280mm AIO water cooler.jpg

The Silent Loop 280 AIO liquid CPU cooler.

The new coolers come clad in all black and feature a new pump design paired with copper cold plates and copper radiators. This is nice to see in the wake of aluminum radiators because using the same metals throughout the loop mitigates the risk of galvanic corrosion that will eventually occur in loops that use mixed metals.

The decoupled reverse flow pump courtesy OEM partner Alphacool.The AIO loop is paired with two Silent Wings 2 fans which use rifle bearings and can spin up to 2,000 RPM. To further set the Silent Loop series apart, Be Quiet! uses a nickel plated CPU cold plate, a radiator with a fill port to allow users to top up the fluids over time, and a reportedly innovative (read: not infringing on Asetek IP) "decoupled reverse flow pump" that spins at 2,200 RPM and allegedly reduces noise to nearly inaudible levels. The pump pulls water into the block and over the cold plate and then pulls it through the pump which is in a sectioned off area of the block.

As for the copper radiators, Be Quiet is using 30mm radiators on the Silent Looop 240 and Silent Loop 280 coolers with two fans side by side and a thicker 45mm radiator on the Silent Loop 120 with two fans in a push-pull configuration. Be Quiet! claims that the 120mm, 240mm, and 280mm coolers can handle wattages of 270W, 350W, and 400W respectively (these numbers are likely with the fans cranked to their maximum speeds heh). The included fans can be controlled via PWM and Be Quiet! includes a Y splitter that allows users to attach both fans to one PWM motherboard header – which is good since the CPU_Fan header is sometimes the only "true" PWM header offered.

The liquid coolers use Philips screws throughout for mounting the radiator, fans, and CPU mount and they are compatible with all the usual Intel and AMD sockets.

Be quiet Silent Loop AIO Water Coolers.jpg

Several sites already have reviews of the new coolers including Kit Guru and Guru3D. According to Leo Waldock from Kit Guru, the Be Quiet! Silent Loop 240 is a "funky and nice piece of hardware" and while it did not blow him away it is competitively priced and performs very closely to the Corsair H100i V2. Out of the box the cooler was reportedly inaudible but with lackluster cooling performance; however, once the fans were cranked up from their normal 1,100 RPM to 1,400 RPM cooling performance greatly improved without sound getting too out of control.

In all it looks good aesthetically and appears to be easy to install. If you are in the market for an AIO and do not need fancy extras (LEDs, monitoring software, ect), the Silent Loop coolers might be worth looking into. Hopefully we can get one in for review so that Sebastian or Morry can take it apart... I mean test it! (heh).

Source: be quiet!