Subject: General Tech | May 7, 2015 - 02:17 PM | Jeremy Hellstrom
Tagged: amd, Carrizo-L, A8-7410, A6-7310, E2-7110, E1-7010, APU
AMD has provided information on their new Carrizo-L based 7000 series of chips featuring the A8-7410, A6-7310 and the A4-7210 as well as the E2-7110 and E1-7010. The two E series chips replace the low powered Beema APS, the E1-6010 and E2-6110 which were found in All-in-One machines with the new E2-7110 being the first of that series to have four cores. The other three models are new desktop chips with newer graphics cores, the full feature set you would expect and slightly higher TDPs than the E-Series.
The existing AMD A-Series Desktop APUs have seen a price reduction today with prices for the top end A10-7850K reduced to $127 with the low end A4-7300 costing a mere $42 which helps AMD's positioning as a supplier in the lower end of the market. You can see the entire price list as well as some information about the new R300 series of GPUs in their post.
"The AMD A-series APU are also the world’s best SoCs for DirectX 12, as independent testing showed a 41% framerate increase under DirectX 12 – read more in the AMD blog here. Additionally, using DirectX 12 the AMD A-series APU was able to demonstrate an incredible 511% increase in performance per watt.
Finally, with a suitably equipped AMD socket FM2+ motherboard featuring DisplayPort, AMD A-series APUs also support AMD FreeSync to deliver all the incredible experience benefits detailed in our AMD blog here."
Here is some more Tech News from around the web:
- The TR Podcast 175: The Zen of chipmaking and ARM's Cortex-A72 revealed
- Zen chips headed to desktops, servers in 2016 @ The Tech Report
- Next Thing Co. Releases “World’s First” $9 Computer @ MAKE:Blog
- Getting Started in Open Source Software @ Linux.com
- Google Updates: Android M, Nexus 9 discount and Google Maps in Madagascar @ The Inquirer
- Samsung will open its biggest chip plant in the first half of 2017 @ The Inquirer
- Rip up your AMD obits: Gaming, VR, embedded chips to lift biz out of the red by 2016, allegedly @ The Register
- FCC wants to know if carriers can grab some of YOUR WiFi signal @ The Register
- Enter to win a limited-edition Asus GeForce GTX 980
Some Fresh Hope for 2016
EDIT 2015-05-07: A day after the AMD analyst meeting we now know that the roadmaps delivered here are not legitimate. While some of the information is likely correct on the roadmaps, they were not leaked by AMD. There is no FM3 socket, rather AMD is going with AM4. AMD will be providing more information throughout this quarter about their roadmaps, but for now take all of this information as "not legit".
SH SOTN has some eagle eyes and spotted the latest leaked roadmap for AMD. These roadmaps cover both mobile and desktop, from 2015 through 2016. There are obviously quite a few interesting tidbits of information here.
On the mobility roadmap we see the upcoming release of Carrizo, which we have been talking about since before CES. This will be the very first HSA 1.0 compliant part to hit the market, and AMD has done some really interesting things with the design in terms of performance, power efficiency, and die size optimizations. Carrizo will span the market from 15 watts to 35 watts TDP. This is a mobile only part, but indications point to it being pretty competent overall. This is a true SOC that will support all traditional I/O functions of older standalone southbridges. Most believe that this part will be manufactured by GLOBALFOUNDIRES on their 28 nm HKMG process that is more tuned to AMD's APU needs.
Carrizo-L will be based on the Puma+ architecture and will go from 10 watts to 15 watts TDP. This will use the same FP4 BGA connection as the big Carrizo APU. This should make these parts more palatable for OEMs as they do not have to differentiate the motherboard infrastructure. Making things easier for OEMs will give more reasons for these folks to offer products based on Carrizo and Carrizo-L APUs. The other big reason will be the GCN graphics compute units. Puma+ is a very solid processor architecture for low power products, but these parts are still limited to the older 28 nm HKMG process from TSMC.
One interesting addition here is that AMD will be introducing their "Amur" APU for the low power and ultra-low power markets. These will be comprised of four Cortex-A57 CPUs combined with AMD's GCN graphics units. This will be the first time we see this combination, and the first time AMD has integrated with ARM since ATI spun off their mobile graphics to Qualcomm under the "Adreno" branding (anagram for "Radeon"). What is most interesting here is that this APU will be a 20 nm part most likely fabricated by TSMC. This is not to say that Samsung or GLOBALFOUNDRIES might be producing it, but those companies are expending their energy on the 14 nm FinFET process that will be their bread and butter for years to come. This will be a welcome addition to the mobile market (tablets and handhelds) and could be a nice profit center for AMD if they are able to release this in a timely manner.
2016 is when things get very interesting. The Zen x86 design will dominate the upper 2/3 of the roadmap. I had talked about Zen when we had some new diagram leaks yesterday, but now we get to see the first potential products based off of this architecture. In mobile it will span from 5 watts to 35 watts TDP. The performance and mainstream offerings will be the "Bristol Ridge" APU which will feature 4 Zen cores (or one Zen module) combined with the next gen GCN architecture. This will be a 14nm part, and the assumption is that it will be GLOBALFOUNDRIES using 14nm FinFET LPP (Low Power Plus) that will be more tuned for larger APUs. This will also be a full SOC.
The next APU will be codenamed "Basilisk" that will span the 5 watt to 15 watt range. It will be comprised of 2 Zen cores (1/2 of a Zen module) and likely feature 2 to 4 MB of L3 cache, depending on power requirements. This looks to be the first Skybridge set of APUs that will share the same infrastructure as the ARM based Amur SOC. FT4 BGA is the basis for both the 2015 Amur and 2016 Basilisk SOCs.
Finally we have the first iteration of AMD's first ground up implementation of ARM's ARMv8-A ISA. The "Styx" APU features the new K12 CPU cores that AMD has designed from scratch. It too will feature the next generation GCN units as well as share the same FT4 BGA connection. Many are anxiously watching this space to see if AMD can build a better mousetrap when it comes to licensing the ARM ISA (as have Qualcomm, NVIDIA, and others).
2015 shows no difference in the performance desktop space, as it is still serviced by the now venerable Piledriver based FX parts on AM3+. The only change we expect to see here is that there will be a handful of new motherboard offerings from the usual suspects that will include the new USB 3.1 functionality derived from a 3rd party controller.
Mainstream and Performance will utilize the upcoming Godavari APUs. These are power and speed optimized APUs that are still based on the current Kaveri design. These look to be a simple refresh/rebadge with a slight performance tweak. Not exciting, but needs to happen for OEMs.
Low power will continue to be addressed by Beema based APUs. These are regular Puma based cores (not Puma+). AMD likely does not have the numbers to justify a new product in this rather small market.
2016 is when things get interesting again. We see the release of the FM3 socket (final proof that AM3+ is dead) that will house the latest Zen based APUs. At the top end we see "Summit Ridge" which will be composed of 8 Zen cores (or 2 Zen modules). This will have 4 MB of L2 cache and 16 MB of L3 cache if our other leaks are correct. These will be manufactured on 14nm FinFET LPE (the more appropriate process product for larger, more performance oriented parts). These will not be SOCs. We can expect these to be the basis of new Opterons as well, but there is obviously no confirmation of that on these particular slides. This will be the first new product in some years from AMD that has the chance to compete with higher end desktop SKUs from Intel.
From there we have the lower power Bristol Ridge and Basilisk APUs that we already covered in the mobile discussion. These look to be significant upgrades from the current Kaveri (and upcoming Godavari) APUs. New graphics cores, new CPU cores, and new SOC implementations where necessary.
AMD will really be shaking up the game in 2016. At the very least they will have proven that they can still change up their game and release higher end (and hopefully competitive) products. AMD has enough revenue and cash on hand to survive through 2016 and 2017 at the rate they are going now. We can only hope that this widescale change will allow AMD to make some significant inroads with OEMs on all levels. Otherwise Intel is free to do what they want and what price they want across multiple markets.
Subject: Processors | February 24, 2015 - 06:18 PM | Jeremy Hellstrom
Tagged: Puma+, Puma, Kaveri, ISSCC 2015, ISSCC, GCN, Excavator, Carrizo-L, carrizo, APU, amd
While it is utterly inconceivable that Josh might have missed something in his look at Carrizo, that hasn't stopped certain Canadians from talking about Gila County, Arizona. AMD's upcoming processor launch is a little more interesting than just another Phenom II launch, especially for those worried about power consumption. With Adaptive Voltage and Frequency Scaling the new Excavator based chips will run very well at the sub-15W per core pair range which is perfect for POS, airplane entertainment and even in casinos. The GPU portion speaks to those usage scenarios though you can't expect an R9 295 at that wattage. Check out Hardware Canucks' coverage right here.
"AMD has been working hard on their mobile Carrizo architecture and they're now releasing some details about these Excavator architecture-equipped next generation APUs."
Here are some more Processor articles from around the web:
- AMD's new Carrizo: The x86 notebook processor that thinks it's a GPU @ The Register
- AMD Carrizo APU Details Revealed @ TechARP
- AMD FX-8320E Performance On Linux @ Phoronix
- Intel Broadwell HD Graphics 5500: Windows 8.1 vs. Linux @ Phoronix
- Preliminary Tests Of Intel Sandy Bridge & Ivy Bridge vs. Broadwell @ Phoronix
AMD Details Carrizo Further
Some months back AMD introduced us to their “Carrizo” product. Details were slim, but we learned that this would be another 28 nm part that has improved power efficiency over its predecessor. It would be based on the new “Excavator” core that will be the final implementation of the Bulldozer architecture. The graphics will be based on the latest iteration of the GCN architecture as well. Carrizo would be a true SOC in that it integrates the southbridge controller. The final piece of information that we received was that it would be interchangeable with the Carrizo-L SOC, which is a extremely low power APU based on the Puma+ cores.
A few months later we were invited by AMD to their CES meeting rooms to see early Carrizo samples in action. These products were running a variety of applications very smoothly, but we were not informed of speeds and actual power draw. All that we knew is that Carrizo was working and able to run pretty significant workloads like high quality 4K video playback. Details were yet again very scarce other than the expected timeline of release, the TDP ratings of these future parts, and how it was going to be a significant jump in energy efficiency over the previous Kaveri based APUs.
AMD is presenting more information on Carrizo at the ISSCC 2015 conference. This information dives a little deeper into how AMD has made the APU smaller, more power efficient, and faster overall than the previous 15 watt to 35 watt APUs based on Kaveri. AMD claims that they have a product that will increase power efficiency in a way not ever seen before for the company. This is particularly important considering that Carrizo is still a 28 nm product.
Subject: Processors | November 20, 2014 - 01:31 PM | Josh Walrath
Tagged: amd, APU, carrizo, Carrizo-L, Kaveri, Excavator, Steamroller, SoC, Intel, mobile
AMD has certainly gone about doing things in a slightly different manner than we are used to. Today they announced their two latest APUs which will begin shipping in the first half of 2015. These APUs are running at AMD and are being validated as we speak. AMD did not release many details on these products, but what we do know is pretty interesting.
Carrizo is based on the latest iteration of AMD’s CPU technology. Excavator is the codename for these latest CPU cores, and they promise to be smaller and more efficient than the previous Steamroller core which powers the latest Kaveri based APUs. Carrizo-L is the lower power variant which will be based on the Puma+ core. The current Beema APU is based on the Puma architecture.
Roadmaps show that the Carrizo APUs will be 28 nm products, presumably fabricated by GLOBALFOUNDRIES. Many were hoping that AMD would make the jump to 20 nm with this generation of products, but that does not seem to be the case. This is not surprising due to the limitations of that particular process when dealing with large designs that require a lot of current. AMD will likely be pushing for 16 nm FinFET for the generation of products after Carrizo.
The big Carrizo supposedly has a next generation GCN unit. My guess here is that it will use the same design as we saw with the R9 285. That particular product is a next generation unit that has improved efficiency. AMD did not release how many GCN cores will be present in Carizzo, but it will be very similar to what we see now with Kaveri. Carrizo-L will use the same GCN units as the previous generation Beema based products.
I believe AMD has spent a lot more time hand tuning Excavator instead of relying on a lot of automated place and route. This should allow them to retain much of the performance of the part, all the while cutting down on transistor count dramatically. Some rumors that I have seen point to each Excavator module being 40% smaller than Steamroller. I am not entirely sure they have achieved that type of improvement, but more hand layout does typically mean greater efficiency and less waste. The downside to hand layout is that it is extremely time and manpower intensive. Intel can afford this type of design while AMD has to rely more on automated place and route.
Carrizo will be the first HSA 1.0 compliant SOC. It is in fact an SOC as it integrates the southbridge functions that previously had been handled by external chips like the A88X that supports the current Kaveri desktop APUs. Carrizo and Carrizo-L will also share the same infrastructure. This means that motherboards that these APUs will be soldered onto are interchangeable. One motherboard from the partner OEMs will be able to address multiple markets that will see products range from 4 watts TDP up to 35 watts.
Finally, both APUs feature the security processor that allows them access to the ARM TrustZone technology. This is a very small ARM processor that handles the secure boot partition and handles the security requests. This puts AMD on par with Intel and their secure computing solution (vPro).
These products will be aimed only at the mobile market. So far AMD has not announced Carrizo for the desktop market, but when they do I would imagine that they will hit a max TDP of around 65 watts. AMD claims that Carrizo is one of the biggest jumps for them in terms of power efficiency. A lot of different pieces of technology have all come together with this product to make them more competitive with Intel and their process advantage. Time will tell if this is the case, but for now AMD is staying relevant and pushing their product releases so that they are more consistently ontime.
Subject: General Tech | October 7, 2014 - 12:57 PM | Jeremy Hellstrom
Tagged: mobile apu, Excavator, Carrizo-L, carrizo, amd, 28nm
Kaveri, Beema and Mullins are on their way out to be replaced by the Excavator based Carrizo family towards the end of the year. We can hope they will appear in products in time for Christmas as the low power Carrizo-L, rumoured to be around 12-35W TDP, will arrive. In the new year the more powerful Carrizo, speculated at 45-65W TDP, will be available. It is unclear how long the delay will be between availability to system builders and the products appearing on the market. The chips will support DDR3, contain a GPU based on GCN 3.0 and stacked on-package memory which will be accessible by Through Silicon Via to act as a sort of L3 cache for HSA applications. DigiTimes also mentions it will run Win8 and Win10 as well as SLED.
"AMD is planning to announce next-generation Carrizo APUs in March 2015 to replace its existing Kaveri APUs for the mainstream performance notebook segment and will release Carrizo-L APUs for the entry-level notebook segment in December 2014 at the earliest to challenge Intel's Pentium and Celeron processors, according to sources from notebook players."
Here is some more Tech News from around the web:
- Hard for Samsung to compete with TSMC for Apple A9 processor orders, say Taiwan makers @ DigiTimes
- Hot DRAM! Samsung splurges $15 BILLION on Korean chip fab @ The Register
- Windows 10 Technical Preview hands-on review @ The Inquirer
- A Production-Ready Flying Car Is Coming This Month @ Slashdot
- Win an X99S Gaming 7 motherboard with KitGuru and MSI