AMD AGESA Update 22.214.171.124 Will Support Configurable Memory Sub Timings And Clockspeeds Up To 4,000 MHz
Subject: General Tech | May 30, 2017 - 04:05 PM | Tim Verry
Tagged: x370, ryzen, overclocking, ddr4, bios, b350, amd, agesa
AMD recently announced a new AGESA update that will improve memory compatibility and add new memory and virtualization features that have been sorely missing from AMD’s new Ryzen platforms. The new AGESA 126.96.36.199 update has been distributed to its motherboard partners and will be part of updated BIOSes that should be out by the middle of June.
The AGESA (AMD Generic Encapsulated Software Architecture) code is used as part of the BIOS responsible for initializing the Ryzen CPU cores, memory controller, and Infinity Fabric. With the 188.8.131.52 update, AMD is adding 26 configurable memory options (including subtimings!) that were previously locked out or limited in the range of values users could set. The biggest change is in clockspeeds where AMD will now allow memory clocks up to 4,000 MHz without needing to adjust the CPU base clock (only the very high-end motherboards had external clock generators that allowed hitting higher than 3200 MHz easily before this update). Additionally, when overclocking and setting clockspeeds above 2667 MHz, users can adjust the clockspeeds in increments of 133 MT/s rather than the currently supported 266 MT/s increments. Also important is that AMD will allow 2T command rates with the new update (previously it was locked at 1T) which improves memory kit compatibility when pushing clockspeeds and/or when running in a four DIMM configuration rather than 2 stick configurations (2T is less aggressive). These changes are especially important for overclocking and, in addition to all the other knobs that will become available, dialing in the highest possible stable clockspeeds. Reportedly, the updated AGESA code does improve on memory kit compatibility and support for more XMP profiles, but the Ryzen platform still heavily favors Samsung B-die based single rank kits. In all, it sounds like there is still more to be done but the 184.108.40.206 update is going to be a huge step in the right direction.
Beyond the memory improvements AMD is also adding support for PCI Express Access Control Services which will improve virtualization support and allow users with multiple graphics cards to dedicate a card to the host and another card to the virtual machine.
ASUS and Gigabyte have already rolled out beta BIOSes for their high-end boards, and other manufacturers and motherboards should be getting beta update’s shortly with the stable releases based on the new AMD code being available next month. I am very interested to see Ryzen paired with 4GHz memory and how that will help gaming and everyday performance and improve things in the Infinity Fabric and CCX to CCX latency department!
Subject: Graphics Cards | January 18, 2017 - 08:43 PM | Sebastian Peak
Tagged: video, unlock, shaders, shader cores, sapphire, radeon, Polaris, graphics, gpu, gaming, card, bios, amd, 1024
As reported by WCCFtech, AMD partner Sapphire has a new 1024 stream processor version of the RX460 listed on their site (Chinese language), and this product reveal of course comes after it became known that RX460 graphics cards had the potential to have their stream processor count unlocked from 896 to 1024 via BIOS update.
Sapphire RX460 1024SP 4G D5 Ultra Platinum OC (image credit: Sapphire)
The Sapphire RX460 1024SP edition offers a full Polaris 11 core operating at 1250 MHz, and it otherwise matches the specifications of a stock RX460 graphics card. Whether this product will be available outside of China is unknown, as is the potential pricing model should it be available in the USA. A 4GB Radeon RX460 retails for $99, while the current step-up option is the RX470, which doubles up on this 1024SP RX460's shader count with 2048, with a price increase of about 70% ($169).
AMD Polaris GCN 4.0 GPU lineup (Credit WCCFtech)
As you may note from the chart above, there is also an RX470D option between these cards that features 1792 shaders, though this option is also China-only.
Subject: General Tech, Motherboards | October 28, 2016 - 12:25 PM | Jeremy Hellstrom
Tagged: Z170, LGA 1151, kaby lake, Intel H170, Intel B150, H110, bios
If you are running an LGA 1151 Gigabyte motherboard then you should stop at this post over at the Guru of 3D some time in the near future and grab an updated BIOS. They were kind enough to provide links for the updates of 47 different motherboards ranging from Z170's down to H110's. Q-Flash means you can update from within the BIOS with USB drive and with Q-Flash Plus you don't even need memory or a CPU installed; we've come a long way from the customized 3.5" boot disks involved in flashing. On the other hand that special thrill of terror has gone away.
"Following MSI and ASUS, Gigabyte now as well offers Kaby Lake compatible BIOS updates for their Z170, H170, B150 and H110 series motherboards. "
Here is some more Tech News from around the web:
- Samsung's free-falling financial flameout @ The Register
- Samsung teases Galaxy S8 with 'slick' new design and AI smarts @ The Inquirer
- Chapeau Is Exactly What the Linux Desktop Needs @ Linux.com
- Divide the internet into compartments to save us from the IoT fail whale @ The Register
- AMD will sell server CPUs at Happy Meal prices so you can supersize servers @ The Register
- Google's AI machines are sending encrypted messages to each other and it's creepy @ The Inquirer
Subject: Processors | February 5, 2016 - 11:44 AM | Sebastian Peak
Tagged: Intel, Skylake, overclocking, cpu, Non-K, BCLK, bios, SKY OC, asrock, Z170
ASRock's latest batch of motherboard BIOS updates remove the SKY OS function, which permitted overclocking of non-K Intel processors via BCLK (baseclock).
The news comes amid speculation that Intel had pressured motherboard vendors to remove such functionality. Intel's unlocked K parts (i5-6600K, i7-6700K) will once again be the only options for Skylake overclocking on Z170 on ASRock boards (assuming prior BIOS versions are no longer available), and with no Pentium G3258 this generation Intel is no longer a budget friendly option for enthusiasts looking to push their CPU past factory specs.
(Image credit: Hexus.net)
It sounds like now would be a good time to archive that SKY OS enabled BIOS update file if you've downloaded it - or simply refrain from this BIOS update. What remains to be seen of course is whether other vendors will follow suit and disable BCLK overclocking of non-K processors. This had become a popular feature on a number of Z170 motherboards on the market, but ASRock may have been in too weak a position to battle Intel on this issue.
Subject: Motherboards | January 14, 2016 - 08:04 PM | Sebastian Peak
Tagged: unlocked, overclocking, oc, LGA 1151, Intel K series, Intel, evga, bios, BCLK
An upcoming BIOS update for EVGA Z170 motherboards to allow BCLK overclocking on non-K Intel processors.
The news came from EVGA Product Manager Jacob Freeman via Twitter this afternoon:
New Z170 BIOS for BCLK OC'ing on non K CPU's coming right up
— Jacob Freeman (@EVGA_JacobF) January 15, 2016
Update: The new BIOS 1.07 enabling non-K BLCK OC is now available from EVGA.
We have been following the story of BCLK overclocking of locked Skylake CPUs since early last month, when Techspot published benchmarks from an Intel Core i3-6100 clocked at 4.70 GHz - thanks to a pre-release ASRock BIOS. The BIOS has since been released, and other vendors are updating their Z170 motherboards to support these locked processors as well, the latest being EVGA.
It remains to be seen if Intel will have anything to say about their cheaper "locked" processors becoming more attractive to potential overclockers, as the unlocked K parts have provided a nice profit margin for the company. So far, board partners are moving forward seemingly unimpeded with the updates to remove the overclocking limitations, and that's great news for enthusiasts.
Subject: Processors | December 11, 2015 - 02:08 PM | Sebastian Peak
Tagged: Skylake, overclocking, Intel, Core i3-6100, bios, BCLK, asrock
The days of Intel overclocking being limited to their more expensive unlocked parts appear to be over, as TechSpot has posted benchmarks from an overclocked Intel Core i3-6100 using a new (pre-release) BIOS update from ASRock.
Image credit: TechSpot
"In overclocking circles it was recently noted that BCLK (base clock) overclocking might become a possibility in Skylake processors. Last night Asrock contacted us with an updated BIOS that enabled this. We jumped at the opportunity and have already tested and benched a Core i3-6100 Skylake CPU with a 1GHz overclock (4.7GHz) on air cooling."
The 1.0 GHz overclock was achieved with a 127 MHz base clock on the i3 processor, with a vcore of ~1.36v. Apparently the ASRock motherboard requires the processor's graphics portion to be disabled for overclocking with this method, and TechSpot used an NVIDIA GTX 960 for test system. The results were impressive, as you might imagine.
The following is a small sampling of the benchmark results available from the sourced TechSpot article:
Image credit: TechSpot
Image credit: TechSpot
The overclocked i3-6100 was able to come very close to the multi-threaded performance of the stock AMD FX-8320E (8-core) processor in Cinebench, with double the per-thread performance. Results from their Handbrake encode test were even better, with the overclocked i3-6100 essentially matching the performance of the Core i5-4430 processor tested.
Gaming was underwhelming, with very similar performance from the GTX 960 from all CPUs at the settings tested.
Image credit: TechSpot
So what did the article say about this new overclocking-friendly BIOS availability? "We are told this updated BIOS for their Z170 motherboards will be available to owners very soon." It will be interesting to see if other vendors offer the same, as there are results out there using a SuperMicro board as well.
Subject: Motherboards | April 30, 2015 - 10:32 PM | Sebastian Peak
Tagged: gigabyte, Intel, Broadwell, h97, z97, bios, cpu, processor
GIGABYTE has announced support for the upcoming LGA 1150 variants of Intel's 5th-generation Core (Broadwell) processors for all existing 9-series motherboards via BIOS update.
The full press release appears below:
City of Industry, California, April 30th, 2015 – GIGABYTE TECHNOLOGY Co. Ltd., a leading manufacturer of motherboards and graphics cards is proud to announce their entire line-up of Z97 and H97 motherboards now support the soon-to-launch 5th Generation Intel® Core™ processors.
GIGABYTE engineers have tested and validated all GIGABYTE 9 series motherboards including Z97 and H97 chipset-based motherboards to ensure optimal performance for 5th Generation Intel® Core™ processors. Users wanting to take advantage of all the features of 5th Gen Intel® Core™ processors have to offer at launch, simply need to download the latest UEFI BIOS from the GIGABYTE website.
To get the latest UEFI BIOS for your motherboard, please visit the GIGABYTE website: http://www.gigabyte.us
Subject: Processors | March 10, 2015 - 10:20 AM | Sebastian Peak
Tagged: uefi, motherboards, lga 1150, Intel, Broadwell, bios, asus
ASUS has announced that all current Intel 9 Series motherboards will support the upcoming 5th-Generation Intel Broadwell LGA 1150 CPUs with an UEFI update.
We reported last week that Intel’s 5th-generation Broadwell CPU had been demonstrated at GDC using Intel’s Iris Pro graphics, though official details about the new LGA versions of Broadwell are not yet public. The desktop variants will no doubt use the same 14nm process technology of the current BGA parts, and it has been rumored that the new CPUs will initially launch in both Core i5 and i7 versions, with the potential for Core i3 and Pentium branded parts to follow (though any potential product information is mere speculation at this point).
It will be interesting to see if the upcoming LGA 5th-Generation CPUs will be able offer any higher perfomance for desktop users compared to existing Haswell parts (such as the i7-4790K), or if there will even be unlocked processors. Considering Broadwell is a mobile-focused part designed for efficency and lower power consumption the chips could offer a compelling solution for small form-factor computers such as HTPCs, as they will presumably provide lower heat and higher IPC than existing parts.
The UEFI updates will go live later today (some updates have already been released) and include all ASUS motherboard models with Z97 and H97 chipsets.
Subject: Motherboards, Processors | July 30, 2013 - 05:00 AM | Tim Verry
Tagged: P9X79, Ivy Bridge-E, IVB-E, bios, ASUS ROG Rampage IV GENE X79, asus
ASUS has released BIOS updates for all of its LGA 2011 X79 motherboards that add support for Intel's upcoming Ivy Bridge-E processors. The update enables enthusiasts to upgrade from their existing Sandy Bridge-E CPU to an Ivy Bridge-E model which adds marginal improvements in performance and power efficiency. Supported processors include the Core i7-4960X Extreme Edition, Core i7-4930K, and the Core i7-4820K. According to benchmarks by Tom's Hardware, the top-end Ivy Bridge-E i7-4960X exhibits up to 30% improvements in performance per watt along with being slightly faster in multi-threaded performance than SB-E. Of course, single threaded performance was shown to be similar to that of Sandy Bridge-E but slower than Haswell.
All of ASUS' X79 boards (including the ROG Rampage, TUF, and P9X79 series) will be getting a BIOS update which will be made available for download on the company's support website or via the individual motherboard product pages. The following chart indicates the motherboard and associated BIOS version number that adds support for IVB-E.
|Motherboard||BIOS Version Supporting IVB-E|
|ROG Rampage IV Extreme||4206|
|ROG Rampage IV Formula||4004|
|ROG Rampage IV Gene||4206|
|TUF Sabertooth X79||4104|
To grab the update, head over to the ASUS support site and type in your motherboard model name to get the appropriate BIOS file.
Will you be upgrading your LGA 2011 rig to Ivy Bridge-E?
Over the weekend, Gigabyte posted a new photo to its Facebook page that teased the interface of the company’s upcoming UEFI BIOS. The new UEFI DualBIOS interface features an orange and black theme with a black background, orange accents, and white text. From the preview photos of Gigabyte’s Z87 motherboards, the BIOS colors will match up nicely with the actual black and orange colored hardware.
The middle pane occupies the most space and brings all of your standard BIOS setup and overclocking settings front and center. Gigabyte has laid out the various settings into tabbed categories. Users can further customize a shortcut menu on the right-most tab. This settings pane is surrounded on all sides by various bars and columns with status information.
The top bar includes graphs on the system’s voltages, fan speeds, and temperatures. The bottom bar displays system information such as the total amount of RAM installed, CPU and BIOS identification, and other information. On the left of the main settings panel is a column with readouts on the installed processor. The information it provides at a glance includes CPU voltage, frequency, temperature, and core ratio. It also lists the CPU fan speeds. Meanwhile, the column on the right-hand side of the display hosts temperature and fan speed information for the PCH, system/case sensor, and up to five case fans.
While some enthusiasts might balk at the orange, black, and white color scheme, in all it looks like a nice improvement. Most of the information is available at a glance, and the customizable shortcut menu is a useful feature.
You can find the original photo as well as several other preview photos on Gigabyte’s Facebook page.
What do you think about the new UEFI BIOS UI?