Introduction and Specifications
The Primera Series PM01 is a new tower enclosure from SilverStone which combines sleek looks and integrated LED lighting.
It's been a little while since we've taken a look at a new case from SilverStone, and the company has certainly not been idle during this time. The case we have for you today is the first model from the new Primera Series, which offers "the feel of a luxurious supercar" from its angular lines and mesh grills, and it features an impressive piano black high gloss finish (a white version is also available).
The PM01 is also equipped with a trio of 140 mm intake fans, which in our black review sample are outfitted with red LED lights (the white version contains blue lighting). In addition to the front fans, the case has integrated LED lighting strips above and beneath the large side panel window, and the lighting effects can be controlled with a 4-position selector button on the top of the case.
SilverStone lists these features for the PM01 enclosure:
- Includes three 140mm LED fans and built-in LED strips for stunning visual impact
- Oversized front panel mesh design inspired by supercar intake grill
- Support two 240/280/360mm radiator for AIO liquid cooler or custom water cooling
- Reserved water tank mounting holes for water cooling setup
- Removable filters with positive air pressure design for dust reduction
- Built-in 4-segment LED light controller to adjustable brightness and modes
- Super clean internal look with PSU and drive bay cover
- Includes 10-in-1 fan hub for fan cable management
The metal mesh front and rear exhaust suggest excellent airflow, and we will find out just how effectively this new case can cool a gaming build - and how quietly it does so.
Subject: Cases and Cooling | September 2, 2016 - 12:00 PM | Sebastian Peak
Tagged: atx, enclosure, corsair, case, carbide, Air 740, dual-chamber, airflow, cooling
Corsair has announced a new member of the Carbide Air family with the new 740, and this dual-chamber case is all about airflow.
A follow-up to the Carbide Air 540, the 740 is a cube-like design, and a fairly roomy 16.8 x 13.4 x 20.1 inches in size. There's plenty of internal room for large components, and tons of room for cooling. How much room? Corsair says the Carbide Air 740 can hold "up to eight 120mm or seven 140mm fans, a 240mm/280mm top radiator, 240mm/280mm floor radiator, and 240/280/360mm front radiator – all at once."
Specifications from Corsair:
- Dual-chamber Direct Airflow Path design: Utilizes dual-chambers to deliver cooler air to your CPU, graphics cards, motherboard, memory, and other PCI-E components without your drives or power supply getting in the way.
- Industrial-style ergonomics and space-saving internal design: Offers massive internal volume by moving the power supply and drive bays into a separate chamber.
- Includes three custom Air Series AF140L intake and exhaust fans: Based on the award-winning AF140, the included fans provide great airflow performance at lower noise levels than typical case fans.
- Amazing cooling expansion room: For up to eight 120mm or seven 140mm fans, a 240mm/280mm top radiator, 240mm/280mm floor radiator, and 240/280/360mm front radiator – all at once.
- 8 x Expansion slots: Can house up to 4 graphics cards.
- I/O Port: 2 x USB 3.0, headphone and mic.
- Dimensions: 426mm x 340mm x 510mm
Corsair has priced the Carbide Air at $149.99, and it's available now.
- Stay tuned as we will have a review of this new Corsair Carbide Air 740 enclosure soon!
Full press release after the break.
Subject: Motherboards | August 2, 2016 - 05:11 PM | Sebastian Peak
Tagged: X99A TOMAHAWK, msi, motherboard, Intel X99, gaming, atx, armor
MSI has announced their newest X99 motherboard, the X99A TOMAHAWK, a premium design with a stealthy black and gray color scheme, and boasting several new features according to MSI.
"The X99A TOMAHAWK has been designed from the ground up as completely new X99 GAMING model. It comes packed with several new and unique MSI features and a fully armored IO and audio cover, harnessing optimized gaming audio and industries’ highest quality components, providing gamers with best-in-class features and protection.
Besides its stunning looks, the cover labeled with TOMAHAWK also protects against Electro Magnetic Interference and ensures pure performance and the best audio signal for your gaming rig. Heavy plated heatsinks with MSI’s unique styling, make sure your system can handle anything when and runs cool when racking up frags and climbing the leaderboards when gaming for longer periods of time."
Here's the rundown of features for the X99A TOMAHAWK, which include dual Intel NICs and USB 3.1 Gen2 support (full specs and more info available on the product page):
- Supports New Intel® Core™ i7 processors Extreme Edition in LGA 2011-3 socket
- Supports Quad Channel DDR4-3333+(OC) Memory
- DDR4 Boost: Give your DDR4 memory a performance boost
- Support lntel® Turbo Boost Max Technology 3.0.
- USB 3.1 Gen2 2X FASTER: USB 3.1 Gen2 offers performance twice as fast as a regular USB 3.0 connection
- Turbo M.2 32Gb/s + Turbo U.2 32Gb/s + USB 3.1 Gen2 Type-A+C + SATA 6Gb/s
- TWIN GAMING LAN with LAN Protect, powered by Intel®: The best online gaming experience with lowest latency
- Audio Boost 3: Reward your ears with studio grade sound quality
- GAMING Hotkey: Assign macros, launch your favorite games or do real-time overclocking using a single button
- XSplit Gamecaster v2.5: 1 year free premium license to show off your skills and achievements to the world
- SteelSeries Certified: Optimized for SteelSeries gaming gear
- Military Class 5: The latest evolution in high quality components featuring the brand new Titanium Chokes
- MULTI-GPU with Steel Armor: Steel Armor PCI-E slots. Supports 3-Way NVIDIA SLI™ & AMD Crossfire™
- Click BIOS 5: Award-winning brand new Click BIOS 5 with high resolution scalable font
- GAMING CERTIFIED: 24-hour on- and offline game testing by eSports players for the best gaming experience
- USB Speed Up: for up to 30% performance improvement on USB devices
Pricing and availablity for the X99A TOMAHAWK has not been announced.
Subject: Cases and Cooling | February 17, 2016 - 04:03 PM | Jeremy Hellstrom
Tagged: PC-7N, Lian Li, atx
The new Lian Li PC-7N will appeal to those who prefer a case exterior with a simple clean design and modern conveniences inside. The case has four tool-less drive trays for 3.5: or 2.5" drives as well as a pair of tool-less 5.25" trays, which some of us still like to have. The case is 210x473x500mm (8.3x18.6x19.7") and can support CPU heatsinks up to 170mm as well as GPUs of up to 370mm (14.6") if you do not populate all the drive bays, 250mm (9.8") if you do.
It can support a pair of 120mm fans in the front and a single one in the rear, or a radiator of 120x240x60mm in the front if you prefer watercooling. The power and reset buttons are located on the top of the case, next to a pair of USB 3.0 ports and audio jacks which are protected by a hinged cover to help keep gunge out of your ports. You will be able to pick it up by the end of this month for around $100
Subject: Cases and Cooling | January 6, 2016 - 03:12 PM | Tim Verry
Tagged: thermaltake, mid tower, full tower, atx
The new Core X71 and Core X31 computer cases adorn the Thermaltake booth at CES this week, and are the latest in the company's Core series. Both cases are built using cold rolled steel and are aimed at enthusiasts looking to overclock using high end air or liquid cooling.
The Core X71 is a full tower case clad in all black with a mesh front panel and a clear side panel window on the left side. It uses a dual chamber design that separates the power supply, cooling, and storage from the main heat generating components (motherboard, CPU, and graphics). The case is practically all ventilation and can support fans or radiators on all sides with everything but the rear fan covered by removable dust filters.
Users can install up to an ATX motherboard and all manner of high end graphics cards thanks to the removable drive cage. Water cooling grommets are positioned on the rear panel and cable management grommets run along the motherboard tray and through the floor of the main chamber into the power supply chamber.
Three drives can be installed behind the motherboard tray in addition to two 3.5" drives in a moveable drive cage and the two 5.25" bays. Cooling can be air or water with up to three 140mm fans in front, three 140mm on top, and three 120mm fans on both the left and right sides of the bottom chamber. Further, there is room for a single 140mm fan on the bottom and the rear panels.
The Core X31 is a miniature version of the X71 bringing it's modularity and emphasis on cooling to a smaller package. Sitting on rounded feet, the X31 has the same black exterior with mesh vents on the front, top, and rear (but not on the sides). A large side panel window takes up the left side and shows off most of the interior. The X31 comes with a black cover to conceal the power supply and give you space to store the inevitable rat's nest of cables to keep the rest of the system looking neat and tidy.
This mid-tower case can support Mini ITX, Micro ATX, and full size ATX motherboards along with graphics cards up to 420mm long and 180mm tall CPU heatsinks. Storage support includes two 5.25" drive bays, three 3.5" drives in drive racks, three 3.5" drives behind the motherboard tray, and two 2.5" SSDs on top of the power supply cover. The case comes with three fans (and in the case of the Core X31 RGB Edition variant three Riing 12 RGB high static pressure fans with a fan controller) and users can install fans (or water cooling radiators) in the following configurations:
- Front: 2 x 140mm
- Top: 3 x 140mm
- Rear: 1 x 140mm
- Bottom: 2 x 140mm
The Core X71 and Core X31 have two USB 3.0, two USB 2.0, and one HD Audio port along the top edge of the case. Both cases will be available next month in the US as well as the UK, Germany, Australia, and New Zealand shortly. The Core X71 is currently priced at $150 at Newegg. The base model Core X31 costs $100 and the RGB Edition is $130.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Cases and Cooling | July 3, 2015 - 02:28 PM | Jeremy Hellstrom
Tagged: Enthoo EVOLV, atx, phanteks
If you were impressed by the Phanteks Enthoo EVOLV case that Sebastian recently reviewed but use a cooler a bit larger than the Corsair H105 and were wondering if the case was big enough for you, [H]ard|OCP has your back. They've confirmed that smaller coolers such as the Antec KÜHLER H2O 620 and 920, Corsair Hydro H50, Corsair Hydro H75, Corsair Hydro H80, Corsair Hydro H90, Silverstone TD03 and NZXT Kraken X40 all fit in the top as well as the standard locations. Large coolers including the Corsair Hydro H100 and Thermaltake Water 3.0 Extreme also fit easily in the top and even extra large 360mm triple fan radiators can be installed with the removal of the small plate at the top of the PSU cover and the rear facing hard drive rack. Hopefully this case hits the market soon as it is proving to be a good solution for the serious enthusiast.
"Today we review the new computer case from Phanteks, the Enthoo EVOLV Mid Tower Chassis. It brings with it full aluminum construction and promises features such as quick release side panels, top mount radiator brackets, a new data drive mounting system, and lots of pretty LEDs in four different colors."
Here are some more Cases & Cooling reviews from around the web:
- Fractal Design's Define S @ The Tech Report
- Bitfenix Aegis Case Review: Maximizing mATX @ Modders-Inc
- Be Quiet! Silent Base 800 Midi Tower Review @ NikKTech
- Be Quiet Silent Base 800 Case Review @ Hardware Asylum
- Antec Signature S10: A Second Coming @ Silent PC Review
- NZXT Kraken X41 CPU Cooler @ Benchmark Reviews
- Silverstone Tundra TD02-E & TD03-E Review @ Hardware Canucks
- Corsair Hydro Series H80i GT @ techPowerUP
- be quiet! Shadow Rock LP Cooler Review @ Neoseeker
Subject: Cases and Cooling | June 4, 2015 - 10:02 PM | Tim Verry
Tagged: modular psu, Fanless PSU, enermax, computex 2015, computex, atx
Enermax has a new power supply on the market that is fully modular, fanless, and digital to boot. the new 550W PSU falls under the company's DigiFanless brand and looks to be perfect for enthusiasts wanting a silent PC.
The Enermax EDF550AWN is the first 550W power supply that is both fanless and supports digital monitoring and control. The 80 PLUS Platinum rated PSU is fully modular and supports both single and multiple +12V rail configurations (user-selectable, +12V1 and +12V2 are rated at 30 amps).
There are no fans here, just lots of ventilation for passive cooling. Enermax officially rates the power supply at 40°C (104°F) maximum operating temperature while delivering the full 550W ouptut power, but in talking with Maximum PC at Computex the company stated that in its testing lab they were able to maintain the maximum output at up to 50°C temperatures before the PSU needed to shut down.
The digital nature of the PSU is related to the ZDPMS (Zero Delay Power Monitoring System) technology which allows users to monitor and control the hardware using software running on the PC it is installed in. The application displays, in real time, the total output power, efficiency, temperature, and individual rail performance. Users can also input their $/KWh electricity costs into the TCO calculator to figure out how much it costs to run their PC and the CO2 footprint. Users are also able to use the ZDMS to adjust the current output and warning notification thresholds.
Maximum PC was on site at Computex and was able to see a demonstration of the PSU monitoring software.
Enermax has included logic to shut down the power supply in the event of overheating as well as the usual fare of safety features (OCP, OVP, UVP, OPP, OTP, SCP & SIP) They even included a bracket that locks the AC cable to the back of the power supply.
From the specifications and this review from ocaholic, the 550W Digifanless PSU is a highly efficient silent PSU with some useful extras that would be perfect for a silent gaming PC, HTPC, or audio engineering PC. It is available now for around $210 from online retailers. Looking on Newegg, you can even get it for 25% off using the promo code 25YRCELEBRATE.
Introduction and First Impressions
The Fortress FT05 is the fifth iteration of SilverStone's Fortress series of enclosures, and, like the latest Raven case, this leverages the complete removal of 5.25" bays to reduce its overall size. We've seen this before as the FT03 completely removed optical support, but this enclosure is related far more closely to the current Raven enclosure than any of its predecessors.
Introduction: The Heart of a Raven
If you're familiar with SilverStone's product lineup you'll know about the Fortress and Raven enclosures which both currently feature an unusual 90° motherboard orientation. This layout places I/O on the top of the case, and helps expel warm air straight up. The Fortress was originally a more conventional design with a standard motherboard layout, but SilverStone switched this to mirror the Raven series with the second version, the FT02. However, just as the Raven series diverged from the original design language and layout of the RV01 with later versions, the Fortress series has undergone some radical changes since its introduction. With this fifth version of the Fortress SilverStone has converged the two enclosure lines, and the FT05 is essentially a more businesslike version of the Raven RV05 - though the design's more conventional exterior also contains noise-dampening material which helps to further differentiate the two enclosures.
Much as the current Raven owes much of its design to an earlier version, in that case the RV01, this new Fortress is a return to the design of the FT02. That earlier Fortress was a large (and quite expensive) case that combined great expandability with excellent cooling, taking the RV01's 90° layout and opening up the interior for an expansive, easy-to-manage interior. A considerable amount of the second gen's interior was devoted to storage, and the front of the case was dominated by 5.25" drive bays.
The second-generation Fortress FT02 interior
Subject: Motherboards | March 14, 2015 - 12:33 AM | Tim Verry
Tagged: usb 3.1, msi, FX, atx, asmedia asm1352r, amd, am3+
MSI recently announced a torrent of new motherboards that feature USB 3.1 ports. The refreshed lineup includes ten Intel models and, in an interesting twist, two AMD motherboards. MSI’s new motherboards support USB 3.1 by using an Asmedia ASM1352R controller that interfaces with the system via two PCI-E 2.0 lanes (PCI-E 2.0 x2). The controller is rated for the full 10Gbps USB 3.1 speeds.
It is worth noting that the boards use the traditional USB Type-A connector with one exception. The MSI Z97A Gaming 6 features the new reversible Type-C connector in the form of a single Type-C USB 3.1 port on the rear I/O panel. The other boards have at least two USB 3.1 ports on their rear I/O panels.
The new USB 3.1-supporting lineup is listed below:
- AMD (970 chipset):
- SLI Krait Edition
- AMD (990FX chipset):
- 990FXA Gaming
- Intel (Z97 chipset):
- Z97A Gaming 9 ACK
- Z97A Gaming 7
- Z97A Gaming 6
- Intel (X99 chipset):
- X99A Gaming 9 ACK
- X99A Gaming 7
- X99A Xpower AC
- X99A Mpower
- X99A SLI Krait Edition
- X99A SLI Plus
- X99A Raider
These new boards are all essentially minor refreshes of previous versions that add the Asmedia controller and faster USB 3.1 ports. You can expect all the multi-GPU and overclocking-friendly features to remain present on these new motherboards.
MSI's X99 Xpower AC (left) and Z97A Gaming 9 ACK (right) now support 10Gbps USB 3.1 ports.
AM3+ is still technically AMD's enthusiast platform, but it is still somewhat odd that MSI chose to add USB 3.1 support to AM3+ motherboards with AMD’s aging 990FX and 970 chipsets rather than FM2+ boards with the newer A88X chipset. On the other hand, you can now add much faster external storage to your AM3+ system to give it a bit more life.
There is no word on pricing but expect the USB 3.1 models to come at a slight premium over the older models in each respective series.
In the last few years NZXT has emerged as a popular choice for computer builds with stylish cases for a variety of needs. The newest member of the H series, the H440, promises quiet performance and offers a clean look by eliminating optical drive bays entirely from the design. While this might be a deal-breaker for some, the days of the ODD seem to be numbered as more enclosures are making the move away from the 5.25" bay.
Image credit: NZXT
But we aren't looking at just any H440 today, as NZXT has sent along a completely custom version designed in alliance with gaming accessory maker Razer to be "the ultimate gamer's chassis". (This case is currently available direct from NZXT's online store.) In this review we'll look at just what makes this H440 different, and test out a complete build while we're at it. Performance will be as big a metric as appearance here since the H440 is after all an enclosure designed for silence, with noise dampening an integral part of NZXT's construction of the case.
Green with Envy?
From the outset you'll notice the Razer branding extends beyond just special paint and trim, as custom lighting is installed right out of the box to give this incarnation of the H440 a little more gaming personality (though this lighting can be switched off, if desired). Not only do the front and side logos and power button light up green, but the bottom of the case features effects lighting to cast an eerie green glow on your desktop or floor.
Image credit: NZXT