Subject: Motherboards | June 10, 2015 - 05:42 AM | Tim Verry
Tagged: Z170, Skylake, mini ITX, Intel Skylake, computex 2015, computex, asrock
ASRock had some nice looking motherboards on display at Computex, but one in particular caught my attention. The ASRock Z170 Gaming-ITX/ac is a Mini ITX motherboard ready to support Intel's upcoming Skylake processor, DDR4 memory, and a slew of speedy connectivity options.
The LGA 1151 socket is situated in the middle of the compact board and is surrounded by a 6+2 power phase, two DDR4 memory slots, the PCH with red heatsink and ASRock Gaming logo, a mini PCI-E slot with pre-installed 802.11ac Wi-Fi card, and a single PCI-E 3.0 x16 slot snuggled along the bottom edge. Storage support includes four SATA 3 ports and a single SATA Express port in the bottom right corner. Several websites are also reporting that this board has an Ultra M.2 port as well, which may be located on the underside of the board like existing Mini ITX motherboard implementations (for space reasons). Unfortunately, I was not able to dig up any photos of the back so we will have to wait for reviews to confirm this.
As far as external I/O, the motherboard has the following ports on the rear panel:
- 1 x PS/2
- 3 x Video outputs (two HDMI and one DisplayPort)
- 2 x USB 3.1
- 6 x USB 3.0
- 1 x Gigabit LAN (from Intel)
- 3 x Analog audio output
- 1 x Optical audio output
In all, this pint-size motherboard packs a punch and will make for a powerful small form factor gaming PC when paired with a Skylake CPU and dedicated graphics card! Of course, the all-important pricing and availability were not announced at the show.
Subject: General Tech, Systems | May 26, 2015 - 05:18 AM | Tim Verry
Tagged: SFF, nuc, Intel, fanless, Cherry Trail, Braswell, asrock
Earlier this month, ASRock showed off a tiny fanless computer it is calling the Beebox. Powered by an Intel Braswell SoC, the new small form factor Beebox offers up a decent selection of I/O ports and general desktop performance while sipping power. The Beebox is approximately the size of Intel's NUC measuring 118.5mm x 110mm x 46mm x (4.67" x 4.33" x 1.81" -- WxDxH) and will come in three color options: black, gold, and white.
This compact PC has a fairly extensive set of ports on tap. The front panel includes a headphone jack, infrared port, one standard USB 3.0 port, and a USB 3.0 Type-C port which supports 5V/3A charging. The rear panel hosts the power jack, two HDMI outputs, one DisplayPort output, two USB 3.0 ports, a Realtek-powered Gigabit Ethernet port, and a Kensington lock slot. Not bad for a small form factor PC.
ASRock will be offering the Beebox in three configuration options including a barebones kit, a version with 32 GB internal storage, 2 GB of RAM, and Windows 10, and a Beebox SKU with 128 GB of internal storage and 4 GB of RAM (and no OS pre-installed). Each of the SKUs are powered by the same Intel Celeron N3000 Braswell SoC. From there, users can add a single 2.5" SATA drive and a Mini PCI-E card (although this slot is occupied by the included 802.11ac Wi-Fi and Bluetooth 4.0 wireless module). The system uses two DDR3L SO-DIMMs and supports a maximum of 8 GB DDR3L at 1600 MHz.
The aspect that made the Beebox stand out to me was the inclusion of the Braswell-based Celeron N3000 processor. This 4W 14nm part features two Airmont CPU cores clocked at 1.04 GHz base and 2.08 GHz turbo paired with 2MB L2 cache and a Gen 8 Intel GPU clocked at up to 600 MHz. This is a desktop variant of the Cherry Trail chips being used in tablets, but it is the lowest TDP Braswell chip currently at a mere 4 watts. ASRock likely went with this chip to ensure they could passively cool it and still keep temperatures in check. As FanlessTech notes, the chassis ASRock is using leaves a lot to be desired when it comes to heat dissipation compared to other fanless cases on the market.
We will have to wait for reviews to see how well the Beebox and its Braswell processor perform, but so long as ASRock is able to keep thermals in check, the little PC should offer acceptable performance for general desktop tasks (browsing the internet, checking email, watching streaming videos, etc). Cherry Trail (and keep in mind Braswell is a higher power chip based on the same architectures) is promising noticeable improvements to graphics and at least slight improvements to CPU performance. According to ASRock, the Beebox is going to be priced aggressively at "very low" price points which should make it a good compromise between older Bay Trail-D systems and newer (and more expensive) Broadwell and Haswell systems.
The Beebox is slated for late June availability, with exact pricing to be announced at that time.
Subject: Motherboards | May 1, 2015 - 01:25 PM | Sebastian Peak
Tagged: sodimm, quad-channel, mini-itx, EPC612D4I, ddr4, ASRock Rack, asrock
They finally did it! A new mini-ITX LGA 2011-3 has been announced by ASRock, the EPC612D4I, and this server-grade product will offer full quad-channel memory support with a switch to SoDIMM RAM.
Image credit: Tom’s IT Pro
While ASRock had previously released a mini-ITX X99 motherboard (the X99E-ITX/ac) there were concessions made based on the limitations of the form-factor, and the motherboard was limited to dual-channel memory with only two DDR4 DIMM slots. So for a full quad-channel experience it became obvious that a switch to SoDIMM’s would be required. So are there any DDR4 SoDIMMs available? They certainly aren’t cheap, but a quick search for the model number of this new board finds a page from Crucial for compatible DDR4 modules – at a cost of $555.99 for a massive 32GB (4x8GB) of 1.2V DDR4-2133 ECC memory.
Specs for the EPC612D4I from ASRock:
- LGA 2011 R3 Intel Xeon processor E5-1600/2600 v3 series
- 4x SO-DIMM slots, supports quad-channel DDR4 2133/1866 ECC
- 4x SATA 6Gb/s by C612
- 1x PCIe 3.0 x16
- Integrated IPMI 2.0 with KVM and Dedicated LAN (RTL8211E)
- Intel Dual GLAN (Intel i210 + Intel i217)
The new board was first reported by Tom's IT Pro and their article lists the retail price for the ASRock EPC612D4I at $265, which isn’t bad for a product like this. While definitely targeting the server market this could potentially be implemented for a very compact workstation setup (and allow creation of a PC to rival the diminutive Mac Pro, perhaps).
Subject: General Tech | March 19, 2015 - 10:12 PM | Ken Addison
Tagged: Xeon D, X99, windows 10, video, usb 3.1, titan x, podcast, nvidia, msi, Intel, HSA 1.0, gtx titan x, gtc 2015, digits devbox, DIGITS, asrock
Join us this week as we the NVIDIA GTX TITAN X, News from GTC2015, Mini-ITX X99 motherboard and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Josh Walrath, Jeremy Hellstrom, Allyn Malventano, and Morry Teitelman
Program length: 1:16:27
Subject: Motherboards | March 14, 2015 - 03:34 AM | Sebastian Peak
Tagged: X99, mini-itx, Haswell-E, CeBIT 2015, asrock
AnandTech is reporting that motherboard maker ASRock will be showing off a new Haswell-E motherboard at CeBIT 2015, and it would represent an industry first as this new X99 board is in the mini-ITX form factor.
Cramming an X99 system into mini-ITX does limit the platform, as the form-factor's two-DIMM limitation means this can only support dual-channel memory. The other obvious penalty is the single x16 PCI Express slot, though ASRock has incorporated an M.2 connector that may be using a x4 connection (the article points out the "Ultra M.2" listing on the box).
The LGA 2011-3 socket is apparently a slim version according to the report, but it still dominates the tiny motherboard. Dual Intel NICs and included 802.11ac WiFi make this very capable from a networking standpoint, but with limited expansion and reduced memory bandwidth this will appeal to only a limited number of users. Very compact micro-ATX enclosures and existing X99 motherboards in the mATX form-factor can already provide a platform for a very powerful small build, but there is something to be said for the engineering that has made the move the mini-ITX possible.
Image credit: SweClockers
One item of interest is the inclusion of a heatsink and fan with the motherboard, and given the unusual layout and socket design it is unclear what the aftermarket cooler support might be like with this motherboard. We should see further details soon as CeBIT 2015 kicks off next week.
Subject: General Tech, Systems | January 30, 2015 - 08:03 AM | Tim Verry
Tagged: visionx, SFF, radeon, m270x, haswell, asrock, amd
ASRock has unleashed an update to its small form factor VisionX series. The new VisionX 471D adds a faster Haswell processor and dedicated Radeon mobile graphics to the mini PC.
The 7.9” x 7.9” x 2.8” PC chassis comes in black or silver with rounded corners. External I/O is quite expansive with a DVD optical drive, two audio jacks, one USB 3.0 port, one MHSL* port (MHL compatible port that carries both data and video), and a SD card reader on the front. Further, the back of the PC holds the following ports:
- 5 x Analog audio jacks
- 1 x Optical audio out
- 1 x DVI
- 1 x HDMI
- 1 x Gigabit Ethernet jack
- 802.11ac (2 antennas)
- 5 x USB 3.0
- 1 x USB 2.0
- 1 x eSATA
ASRock has gone with the Intel Core i7-4712MQ processor. This is a 37W Haswell quad core (with eight threads) clocked at up to 3.3GHz. Graphics are handled by the AMD Radeon R9 M270X which is a mobile “Venus” GCN-based GPU with 1GB of memory. The 28nm GPU with 640 cores, 40 TMUs, and 16 ROPs is clocked at 725 MHz base and up to 775 MHz boost. The PC further supports two SO-DIMMS, two 2.5” drives, one mSATA connector, and the above-mentioned DVD drive (DL-8A4SH-01 comes pre-installed).
The VisionX 471D is a “barebones” system where you will have to provide your own OS but does come with bundled storage and memory. Specifically, for $999, the SFF computer comes with 8GB of DDR3 memory, a 2TB mechanical hard drive, and a 256GB mSATA SSD (the ASint SSDMSK256G-M1 using a JMF667 controller and 64GB 20nm IMFT NAND). This leaves room for one additional 2.5” drive for expansion. Although it comes without an operating system, it does ship with a Windows Media Center compatible remote.
This latest addition to the VisionX series succeeds the 420D and features a faster processor. At the time of this writing, the PC is not available for purchase, but it is in the hands of reviewers (such as this review from AnandTech) and will be coming soon to retailers for $999 USD.
The price is on the steep side especially compared to some other recent tiny PCs, but you are getting a top end mobile Haswell chip and good I/O for a small system with enough hardware to possibly be "enough" PC for many people (or at least a second PC or a HTPC in the living room).
Subject: Motherboards | January 7, 2015 - 09:52 PM | Jeremy Hellstrom
Tagged: asrock, fatal1ty, 990fx, killer, amd
For a mere $144 you can pick up an impressive AM3+ board, the ASRock Fatal1ty 990FX Killer and for $185 you can install an FX-8370E on the board. This leaves you budget leftover to pick up an impressive GPU, SSD and some value priced DDR3 allowing you to create a system that is significantly less than an Intel based on and still lets you game in style. This particular board offers three PCIe 2.0 x16 Slots and a pair of PCIe x1 slots, five SATA 6Gbps ports and an NGFF M.2 port, 7 channel Realtek ALC1150, a TI NE5532 headset amp and quite a few USB 3.0 and 2.0 ports. As Modders-Inc points out it is not the newest product on the market but it has a brilliant feature set and as it is often on special a little patience could net you an even better deal. Check out the review and remind yourself that while AMD is down, it is not quite out yet.
"It is an odd way to start the new year with a review of what many enthusiasts consider old technology (990FX mainboard) but the ASRock Fatal1ty 990FX Killer is an interesting and unique in that it incorporates many modern comforts not found on other 990FX mainboards. Plus, with the release of lower power 95W FX processors a few months ago, …"
Here are some more Motherboard articles from around the web:
- ASRock Q2900M Motherboard @ Hardware Secrets
- ASUS X99-E WS Motherboard – Workstation Durability and Compatibility @ Bjorn3d
- Asus X99-A @ Kitguru
- ASRock X99 Extreme11 @ techPowerUp
- ASUS Maximus VII Impact Mini-ITX board @ HardwareOverclock
- ECS Deluxe Z97-PK Review @ OCC
- Asus Maximus VII Impact (Z97) mITX @ Kitguru
Subject: General Tech | October 30, 2014 - 06:59 PM | Jeremy Hellstrom
Tagged: x99 ws, Intel X99, Haswell-E, asrock
ASRock has a Work Station class board for Haswell-E with five PCIe 3.0 slots, support for up to 128GB of RAM which can be ECC if you install an appropriate processor and on the back are four of both USB 2.0 and 3.0 ports, one eSATA ports, audio and a pair of LAN ports. They also included A-Tuning overclocking software which seems odd for a Work Station but proved to be very important as [H]ard|OCP could not get the system they built with this board to POST at default settings and had to change UEFI settings to get it to boot. Once it did start up the performance was solid and it was one of the better ASRock boards that [H] has reviewed though with a street price over $300 it is hard to recommend.
"ASRock comes to us with its "Work Station" version Haswell-E motherboard. This time our out-of-box experience with its X99 WS was as rock solid as it could be and did leave us with feelings of getting to work with a quality component. As you all know, we are much more interested in how it performs at high clocks while under stress."
Here are some more Motherboard articles from around the web:
- ASRock X99 Extreme11 @ The SSD Review
- ASUS X99-A Motherboard @ Hardware Secrets
- MSI Z97 Gaming 9 AC Motherboard Review @ Modders-Inc
- Asus Maximus Vii Hero Motherboard Review @ TechwareLabs
- MSI X99S Gaming 9 AC @ HardwareHeaven
- MSI X99S SLI PLUS On Linux @ Phoronix
- Gigabyte Z97X-Gaming 5 @ eTeknix
Subject: Motherboards | October 23, 2014 - 05:19 PM | Jeremy Hellstrom
Tagged: asrock, Z97 Extreme6, Broadwell, haswell
For just under $200 the ASRock Z97 Extreme is a good base to build a Broadwell or Haswell platform on for significantly less than a brand new Haswell-E system. The design is quite clean and well spaced out to allow the use of a large cooler along with integral heat sinks improving the looks and thermals of the motherboard. The first two PCIe 3.0 16x slots share 16 lanes between them, the third slot is PCIe 2.0 and is limited to a maximum of two lanes, with two 1x and a mini PCIe slot each getting one lane. Four of the remaining PCIe 3.0 lanes are taken up by the M.2 socket, which gives you up to 32Gbps of transfer speed, not too shabby for a Z97 board. There are a lot of other features, including two separate physical UEFI chips and a very comprehensive software suite to manage the system, which you read about at The Tech Report.
"With Broadwell compatibility and a secondary M.2 socket connected to four PCIe Gen3 lanes in the CPU, ASRock's Z97 Extreme6 might just be the most future-proof Haswell motherboard around. It's surprisingly affordable, too, despite having loads of other extras. Read on for more on a truly unique Z97 contender."
Here are some more Motherboard articles from around the web:
- GIGABYTE GA-X99-UD4 LGA 2011-v3 @ [H]ard|OCP
- ASUS X99 Deluxe Review @ OCC
- ASRock X99 OC Formula @ The SSD Review
- ASRock X99 Extreme4 Motherboard @ Hardware Secrets
- ASUS AM1M-A Motherboard @ Hardware Secrets
- ASRock Fatal1ty 990FX Killer AM3+ @ Benchmark Reviews
Subject: Motherboards | August 30, 2014 - 05:10 PM | Tim Verry
Tagged: xeon, x99 ws, X99, workstation, socket 2011-3, Intel, Haswell-E, asrock
Alongside the X99 Extreme6 for enthusiasts, ASRock has launched the X99 WS (E-ATX) motherboard for professional workstations and servers. The board uses a black PCB, blue aluminum heatsinks on the power phase and PCH areas, and gold colored caps. The E-ATX motherboard uses short screws and a thinner CPU socket backplate to allow it to fit into 1U server cases. You have ample PCI-E slots, DDR4 (and ECC RDIMMs), USB 3.0, Thunderbolt 2 (with an AIC), eSATA, M.2, and SATA III for connectivity. Power is regulated by a 12 power phase "Digi Power" design with high quality Ultra Dual-N MOSFETs, 60A chokes, 12K Nichicon capacitors.
The X99 WS also uses larger heatsinks, especially around the CPU area. The board features an Intel LGA 2011-3 socket that will accept Haswell-E or Xeon E5-1600/2600 v3 processors up to 18 cores and 160W TDPs. Eight memory slots surround the CPU socket and support a maximum of 128GB of DDR4 3200+ memory. Storage is handled by 10 SATA III 6Gbps ports and a single "Ultra M.2" slot that supports SATA III or PCI-E x4 controller equipped drives.
This worskation board takes advantage of the Extended ATX form factor to cram in additional PCI-E 3.0 slots versus the shorter X99 Extreme6. A PCI-E 2.0 x 16 slot sits directly below the CPU socket followed by the (mentioned above) M.2 slot and five PCI-E 3.0 x 16 slots. The five PCI-E 3.0 slots allow for 4-Way CrossFireX and 4-Way SLI multi-GPU setups. To take full advantage of this board, you will want to pair it with the higher end Haswell-E parts (5930K, 5960X, et al) with the full 40 lanes rather than the entry level 5820K with its limited 28 PCI-E lanes.
Using internal headers, the X99 WS supports a TPM module, two COM ports, two USB 3.0 ports, four USB 2.0 ports, and a Thunderbolt port (via an extra add-in-card). It features two CPU fan and three chassis fan headers as well.
The X99 WS features the following ports on the rear IO panel.
- 1 x PS/2
- 4 x USB 2.0
- 1 x eSATA
- 4 x USB 3.0
- 2 x Gigabit LAN
- 1 x Intel I217LM
- 1 x Intel I210AT
- 7.1 Channel Audio (Realtek ALC1150)
- 5 x Analog audio outputs
- 1 x Optical audio output
The X99 WS is available now with a three year manufaturer warranty for $323.99. The price alone pushes this board well into the professional market, but gamers can get most of the way to the WS feature-wise with the X99 Extreme6. The WS goes up against the boards like the ASUS X99-Deluxe and MSI X99S XPOWER AC.