Aqua Computer and Rockit don't want you to keep your hat on

Subject: Processors | April 27, 2017 - 06:24 PM |
Tagged: rockit, risky business, overclocking, kaby lake, delidding, core i7 7700k, aqua computer

Delidding a Kaby Lake processor such as the i7-7700k does not offer the same overclocking advantages as with previous generations when replacing the TIM gave you more headroom.  Instead of being able to push your CPU past 5GHz, popping the lid off of a Kaby Lake reduces operating temperatures and likely extends the life of the processor ... or immediately ends it.  If you don't have a 3D printer handy to make your own delidder, then take a peek at this review from TechPowerUp.  They try out two delidding tools, one from Aqua Computer and one from Rockit which Morry has used; do be aware that any CPUs killed as a result of reading their review is the responsibility of the one who delidded.

delid-1.jpg

"Intel mainstream CPUs have had a bottleneck in cooling due to poor heat transfer from the CPU die to the integrated heat spreader. Thanks to new de-lidding friendly tools released recently, it is now easier than ever before to handle this yourself and get a cooler running CPU. We examine two such solutions from Rockit Cool and Aqua Computer today, both of which promise fool-proof de-lidding and re-lidding"

Here are some more Processor articles from around the web:

Processors

Source: TechPowerUp

Aqua Computer Starts Selling a Full Cover Water Block for AMD's R9 Nano Graphics Card

Subject: Cases and Cooling | September 16, 2015 - 06:29 PM |
Tagged: water cooling, kryographics, GPU Water Block, copper, aqua computer

AMD officially launched its R9 Nano graphics card last week, and aftermarket coolers are already starting to ship. German-based Aqua Computer is the first company to offer a custom cooler for AMD’s pint-sized powerhouse. The Kryographics R9 Nano is a full cover water block that takes the already tiny card to a single slot design.

Aqua Computer Kryographics R9 Nano Full Cover Water Block Plexiglass.jpg

The Kryographics R9 Nano cooler is a machined copper block that covers the entire PCB and is paired to the VRMs using thermal pads and the GPU (and HBM) using thermal compound. The single slot cooler comes in two options including a see-through translucent ruby colored acrylic glass variant and a version with a brushed stainless steel top cover. In all cases, the block itself is all copper with microchannels over the GPU portion.

The cooler uses standard G1/4 threading on the ports and is compatible with CrossFire multi-GPU watercooled setups by removing the terminating screws and adding ports on the oppposite side of the card..

According to Aqua Computer, the Kryographics cooler was able to keep the R9 Nano GPU under 35 degrees C throughout their testing using Furmark. It will be interesting to see if the new cooler would allow the chips to maintain higher clockspeeds, especially with the power target maxed out in CCC. The need to fit a radiator, pump, and tubing in the case does while still needing to use a Nano (in lieu of a Fury X) makes this a niche within a niche product, but I’m sure some enthusiast will find a use for it!

Aqua Computer Kryographics R9 Nano Full Cover Water Block.jpg

The Kryographics R9 Nano is available for purchase now (though there is currently a shipping delay of 10 days). The base version without the see-through window has an MSRP of 89.90 EUR while the Kryographics Acrylic Glass Edition has a slight premium at 99.90 EUR. (At the time of writing, that pricing works out to about $102 and $113 USD respectively.)