AMD is up to some interesting things. Today at AMD’s tech day, we discovered a veritable cornucopia of information. Some of it was pretty interesting (audio), some was discussed ad-naseum (audio, audio, and more audio), and one thing in particular was quite shocking. Mantle was the final, big subject that AMD was willing to discuss. Many assumed that the R9 290X would be the primary focus of this talk, but in fact it very much was an aside that was not discussed at any length. AMD basically said, “Yes, the card exists, and it has some new features that we are not going to really go over at this time.” Mantle, as a technology, is at the same time a logical step as well as an unforeseen one. So what all does Mantle mean for users?
Looking back through the mists of time, when dinosaurs roamed the earth, the individual 3D chip makers all implemented low level APIs that allowed programmers to get closer to the silicon than what other APIs such as Direct3D and OpenGL would allow. This was a very efficient way of doing things in terms of graphics performance. It was an inefficient way to do things for a developer writing code for multiple APIs. Microsoft and the Kronos Group had solutions with Direct3D and OpenGL that allowed these programmers to develop for these high level APIs very simply (comparatively so). The developers could write code that would run D3D/OpenGL, and the graphics chip manufacturers would write drivers that would interface with Direct3D/OpenGL, which then go through a hardware abstraction layer to communicate with the hardware. The onus was then on the graphics people to create solid, high performance drivers that would work well with DirectX or OpenGL, so the game developer would not have to code directly for a multitude of current and older graphics cards.
Retiring the Workhorses
There is an inevitable shift coming. Honestly, this has been quite obvious for some time, but it has just taken AMD a bit longer to get here than many have expected. Some years back we saw AMD release their new motto, “The Future is Fusion”. While many thought it somewhat interesting and trite, it actually foreshadowed the massive shift from monolithic CPU cores to their APUs. Right now AMD’s APUs are doing “ok” in desktops and are gaining traction in mobile applications. What most people do not realize is that AMD will be going all APU all the time in the very near future.
We can look over the past few years and see that AMD has been headed in this direction for some time, but they simply have not had all the materials in place to make this dramatic shift. To get a better understanding of where AMD is heading, how they plan to address multiple markets, and what kind of pressures they are under, we have to look at the two major non-APU markets that AMD is currently hanging onto by a thread. In some ways, timing has been against AMD, not to mention available process technologies.
Subject: Processors, Mobile | September 4, 2013 - 11:32 AM | Ryan Shrout
Tagged: Temash, ifa 2013, asus, APU, amd, a4-1200
The hits just keep coming from ASUS this morning with the announcement of a new ultraportable notebook with the ambiguous name of X102BA. Though the name might not be catchy the device itself is more interesting because of the hardware that is powering it, specifically an AMD Temash A4-1200 APU.
This marks one of the few highly visible systems being powered by the AMD Temash architecture and I will be very curious to its reception. The APU itself is a dual-core part that runs at 1.0 GHz with integrated Radeon HD 8180 graphics that is more than enough for a modest Windows 8 working environment. There is a quad-core variant of Temash available but ASUS decided to go with the dual-core option. If you need more information on the new architecture that AMD created for Kabini and Temash (based on Jaguar CPU cores and GCN GPU cores) then you should see our coverage from their announcement back in May.
The rest of the specifications are a bit more tame, including a 1366x768 10.1-in 10-point multi-touch screen, USB 3.0, 802.11n WIFI, bundled Microsoft Office Home and Student 2013 and a touted 2-second resume time.
Even though the battery life is only listed at 5 hours, the 2.4 pound weight makes the X102BA a very portable machine. Plus you can get it in Hot Pink!
Subject: General Tech, Graphics Cards, Processors | August 16, 2013 - 04:00 PM | Scott Michaud
Tagged: nvidia, Intel, APU, amd
Despite a slight decline in PC sales compared to last quarter, graphics processors are on the rise. Jon Peddie Research attributes the heightened interest in graphics, with a decline in systems, to a trend towards multiple GPUs in a system. Crossfire and SLI, according to the report, are not driving this drift but they are relevant. More importantly, consumers are adding discrete graphics to systems with integrated solutions.
AMD has experienced an increase in shipments of 47% for laptop APUs. Desktop heterogeneous processors declined but, in all, shipments increased 11%. Intel, likewise, saw an increase albeit just 6%. NVIDIA declined 8%. AMD now enjoys a 5.8% lead in total market share over NVIDIA.
Many PCs have access to multiple graphics processors simultaneously. With an increase of available GPUs, software developers might take the plunge into fully supporting heterogeneous architectures. You could imagine a game which offloads physics or AI pathfinding to secondary graphics. Sure, the increased heat would slightly limit the turbo-performance of the CPU, but the increased parallel performance should overtake that decreased serial performance for a sensible developer.
JPR claims an average of nearly 1.4 GPUs available per system.
The increased laptop heterogeneous processors is a major win for AMD. Still, I wonder how much Never Settle played in to users dropping discrete graphics into machines which would otherwise have integrated (chipset or processor) graphics. The discrete graphics market has declined and yet somehow AMD got a boost from double-attach or replaced graphics.
The report only discusses consumer x86 tablets, desktops, laptops, and some hybrid between the previous three categories. Other processor architectures or x86 servers are not covered.
Subject: Processors | July 31, 2013 - 03:59 AM | Tim Verry
Tagged: Kaveri, fm2, carrizo, APU, amd radeon, amd
Rumors recently surfaced via VR-Zone china that AMD’s Kaveri APU successor will be code-named Carrizo, and it will be compatible with the upcoming FM2+ socket and AMD A88X chipset that Kaveri will use.
AMD’s Carrizo APUs will reportedly be available in TDPs up to 65W and will feature Excavator CPU cores along with a next generation Radeon GPU. Much like Kaveri, Carrizo will be fully HSA compliant. The chips will also include support for DDR4.
Carrizo will allegedly begin sampling in August 2014 with mass production starting around December. That means Carrizo will be available for purchase within the first half of 2015.
FM2+ boards like the ASUS A55BM-A/USB3 are rumored to support AMD's Carrizo APUs (the successor to Kaveri).
The rumors also suggest that Carrizo will be joined by a low power “Beema” System on a Chip (SoC) and a BGA-based Nolan APU for embedded systems. Details on these complementary chips are scarce, however. Perhaps most telling is last bit of the article that suggests that AMD will not be releasing a AM3+ Vishera CPU-only processor successor. It seems AMD is going all in as an APU company after all.
I have been looking forward to the launh of AMD's Kaveri since AFDS 2012, and Carrizo appears to be a refinement of that chip. It should be more power efficient and faster thanks to architecture tweaks and process shrinks. I think that AMDs architecture and HSA approach has potential, and I'm excited to see what these upcoming chips can do with regards to performance.
Subject: Motherboards | July 28, 2013 - 07:40 PM | Tim Verry
Tagged: hUMA, Kaveri, hsa, fm2, asus, APU, A88X, A55, PCI-E 3.0, mATX
ASUS recently announced two new socket FM2+ motherboards that are compatible with AMD’s upcoming “Kaveri” Accelerated Processing Units (APUs). The new boards are the A88XMA and A55BM-A/USB3 and use the A88X and A55 AMD chipsets respectively. Pricing and availability have not yet been released, but the new boards confirm that users will need new motherboards in order to take advantage of AMD’s next generation APUs (though the new FM2+ boards are backwards compatible with the existing APUs, it will not work the other way around). Both motherboards should be available around the time of the Kaveri processor launch (2H 2013).
The AMD A88XMA FM2+ Motherboard.
Both the ASUS A88XMA and A55BM-A/USB3 motherboards come in the mATX form factor. The boards both have FM2+ processor sockets and expansion slots including a single PCI-E 3.0 x16 slot, one PCI-E 2.0 x1 slot, and one legacy PCI slot. The support for PCI-E 3.0 is new for AMD motherboards, and the extra bandwidth may prove useful for as graphics cards get faster and AMD works on its hUMA and HSA architectures to create a layer of virtual memory that can be simultaneously addressed by CPUs and GPUs. There will still be latency to deal with over the PCI-E bus, but more data can be moved back and forth in the same amount of time.
The two ASUS FM2+ motherboards also share the same rear IO options, which include:
- 2 x PS/2
3 x Video outputs:
- 1 x HDMI
- 1 x DVI
- 1 x VGA
- 2 x USB 3.0
- 2 x USB 2.0
- 1 x Gigabit Ethernet
- 3 x Analog audio jacks
The RJ45 jacks are backed by a Realtek 8111G Gigabit Ethernet controller and the audio jacks are handled by a Realtek ALC887-VD chipset. Finally, they also have UEFI BIOSes in common, but from there the two boards diverge in hardware capabilities.
The ASUS A88XMA is the higher-end of the two boards, and features a FM2+ socket, four DDR3 DIMM slots, and six SATA 3 6Gbps ports. It utilizes the AMD A88X chipset which is aimed at enthusiast platforms.
ASUS' A55BM-A/USB3 budget motherboard.
On the other hand, the A55BM-A/USB3 motherboard uses the cheaper A55 chipset. That motherboard features an FM2+ socket, two DDR3 DIMM slots, and six right angle SATA 2 3Gpbs ports. The A55Bm-A/USB3 should be significantly cheaper as a result of the A55 chipset and resulting hardware reductions. In most other respects, ASUS has managed to make the two baords remarkably similar, including aesthetics and basic board layout.
According to Bit-Tech, the two boards are are part of a larger family of boards with the new FM2+ sockets. As such, we should see additional ASUS boards that fill in the gaps between the two models closer to AMD's Kaveri launch. As noted above, ASUS has not provided official pricing or release date information yet.
Subject: Processors | July 28, 2013 - 01:08 PM | Tim Verry
Tagged: Richland, overclocking, LN2, APU, amd, a10-6800k
A Finnish overclocker known as “The Stilt” recently pushed an AMD Richland APU to 8.2GHz using liquid nitrogen. In doing so, The Stilt broke the world record for APU overclocking, besting his previous overclock attempt.
Specifically, the chip was a retail version of the AMD A10-6800K “Richland” APU. It was overclocked to 8203.01 MHz with a 130.21 MHz base clock and 63x multiplier. Even more impressive is that The Stilt managed the overclock with less voltage -- 1.968 volts -- than his earlier (and lower) overclock. For comparison, the earlier overclock brought the A10-6800K to 8000.48 MHz using 2.008 volts.
The system used to overclock the APU included an ASUS F2A85-V Pro motherboard, 8GB of AMD DDR3 Performance memory, and a Radeon HD 7750 graphics card. The overclocker used liquid nitrogen to cool the APU while the GPU was left at stock settings and with its default air cooler. The RAM was overclocked to 2083.6 MHz with 10-11-10-27 timings.
In all, it is an impressive overclock considering all four CPU cores were left enabled! More details along with validation of the overclock can be found over at HWBot.
Also read: AMD A10-6800K and A10-6700 Review: Richland Finally Lands @ PC Perspective
Battle of the IGPs
Our long journey with Frame Rating, a new capture-based analysis tool to measure graphics performance of PCs and GPUs, began almost two years ago as a way to properly evaluate the real-world experiences for gamers. What started as a project attempting to learn about multi-GPU complications has really become a new standard in graphics evaluation and I truly believe it will play a crucial role going forward in GPU and game testing.
Today we use these Frame Rating methods and tools, which are elaborately detailed in our Frame Rating Dissected article, and apply them to a completely new market: notebooks. Even though Frame Rating was meant for high performance discrete desktop GPUs, the theory and science behind the entire process is completely applicable to notebook graphics and even on the integrated graphics solutions on Haswell processors and Richland APUs. It also is able to measure performance of discrete/integrated graphics combos from NVIDIA and AMD in a unique way that has already found some interesting results.
Battle of the IGPs
Even though neither side wants us to call it this, we are testing integrated graphics today. With the release of Intel’s Haswell processor (the Core i7/i5/i3 4000) the company has upgraded the graphics noticeably on several of their mobile and desktop products. In my first review of the Core i7-4770K, a desktop LGA1150 part, the integrated graphics now known as the HD 4600 were only slightly faster than the graphics of the previous generation Ivy Bridge and Sandy Bridge. Even though we had all the technical details of the HD 5000 and Iris / Iris Pro graphics options, no desktop parts actually utilize them so we had to wait for some more hardware to show up.
When Apple held a press conference and announced new MacBook Air machines that used Intel’s Haswell architecture, I knew I could count on Ken to go and pick one up for himself. Of course, before I let him start using it for his own purposes, I made him sit through a few agonizing days of benchmarking and testing in both Windows and Mac OS X environments. Ken has already posted a review of the MacBook Air 11-in model ‘from a Windows perspective’ and in that we teased that we had done quite a bit more evaluation of the graphics performance to be shown later. Now is later.
So the first combatant in our integrated graphics showdown with Frame Rating is the 11-in MacBook Air. A small, but powerful Ultrabook that sports more than 11 hours of battery life (in OS X at least) but also includes the new HD 5000 integrated graphics options. Along with that battery life though is the GT3 variation of the new Intel processor graphics that doubles the number of compute units as compared to the GT2. The GT2 is the architecture behind the HD 4600 graphics that sits with nearly all of the desktop processors, and many of the notebook versions, so I am very curious how this comparison is going to stand.
Subject: General Tech, Processors | July 3, 2013 - 03:12 AM | Scott Michaud
Tagged: Richland, APU, amd
Accidents happen. AMD has been rolling out their Richland APUs for the last month and partners have been keeping up with supporting products. While common, the problem with rolling releases is the potential confusion over what has and what has not been released. Unfortunately for MSI, their support chart for FM2 CPUs includes a couple of products which are news to us.
AMD will be able to hit the 45W TDP with the, apparently, upcoming A8-6500T and A10-6700T APUs. Tom's Hardware seemed to have slightly different information, their chart does not exactly jive with the one posted by MSI; for instance, they claimed the T suffix implied a low power variant when MSI's chart confirmed a 45W TDP... fairly loud and clear. As such, our table will be my best attempt at combining both charts along with a bit more leaked GPU information from TechPowerUP.
|Base Clock||2.1 GHz||2.5 GHz|
|L2 Cache||4 MB||4 MB|
|L3 Cache||0 MB (N/A)||0 MB (N/A)|
Radeon HD 8550D
(Not HD 8650D)
|Radeon HD 8650D|
|GPU Clock||720 MHz||720 MHz|
|GPU Boost Clock||844 MHz (???)||844 MHz (???)|
|GPU Shader Count||256||384|
It is impossible to know expected price, release window, or even whether the product still exists. For that, we will need to wait for an official unveiling... or at least another unofficial one.
Subject: Editorial, Processors | June 10, 2013 - 10:53 AM | Ryan Shrout
Tagged: SimCity, Richland, giveaway, contest, APU, amd, a10-6800k
Odd, turns out I found two brand new AMD A10-6800K Richland APUs sitting on my desk this morning. I called AMD to ask what this was all about and they said that if I didn't need them, I might as well give them away to our readers.
"Oh, and throw in a free copy of the new SimCity while you're at it," they told me.
Who am I to argue?
So let's have a giveaway!
We are handing out two AMD A10-6800K "Richland" APUs for you to build a brand new PC around and including a key for SimCity with each of them. If you haven't read Josh's review of the A10-6800K APU you should definitely do so; it will help educate you on exactly what you are getting - for FREE.
To enter, I need you to leave a comment on this very news post below telling us what you would build with a brand new A10 APU - you don't have to be registered to do so but we'd sure like it if you were. (Make sure you leave your correct email address so I can get in touch with you if you win.) Also, feel free to stop by the PC Perspective YouTube channel and either give our videos a gander or subscribe. I think we put out some great content there and we'd like more of you to see it.
I will pick one winner on June 17th and another on June 24th so you have two separate weeks to potentially win!
A big thanks goes out to AMD for supplying the APUs and copies of SimCity for this giveaway. Good luck!!