Subject: Graphics Cards | July 13, 2015 - 03:34 PM | Jeremy Hellstrom
Tagged: Fury, DirectCU III, asus, amd
The popular ASUS STRIX series has recently been updated with the DirectCU III custom cooler, on both the GTX 980 and the new Radeon Fury. This version uses dual-10mm heatpipes and Triple Wing-Blade fans which are billed as providing 220% larger surface area as well as an increase in air pressure of 105%, which provide a claimed 40% reduction in temperature. We cannot directly compare the cooling ability directly to the retail model, however [H]ard|OCP's tests show you can indeed cool a Fury on air, 71C at full load is lower than the 81C seen on a GTX 980. Even more impressive is that fans were only at 43% speed and operating almost silently, at the cost of increased noise you could lower those temperatures if you desired. Check out their full review to see how the card did but do take note, [H] does not at this time have access to the new GPU Tweak II utility required to overclock the card.
-update - now with less X's
"AMD's Radeon Fury X is here, the AMD Radeon R9 Fury presents itself and we evaluate a full retail custom ASUS STRIX R9 Fury using ASUS' new DirectCU III technology. We will compare this to a GeForce GTX 980 using the new drivers AMD just released and find out what kind of gameplay experience the R9 Fury has to offer."
Here are some more Graphics Card articles from around the web:
- Asus' Strix Radeon R9 Fury @ The Tech Report
- ASUS Radeon R9 Fury STRIX 4 GB @ techPowerUp
- AMD Radeon R9 380 2GB CrossFireX @ eTeknix
- Sapphire Tri-X Radeon R9 Fury 4GB @ Kitguru
- The AMD R9 Fury Performance Review @ Hardware Canucks
- MSI GTX980 Ti Gaming 6G @ Kitguru
- Zotac GTX 980 Ti Amp! Edition 8 GB @ techPowerUp
- ASUS STRIX Gaming GTX 980 Ti DirectCU 3 @ Kitguru
- Gigabyte GTX 980 Ti G1 Gaming @ HardwareHeaven
Fiji brings the (non-X) Fury
Last month was a big one for AMD. At E3 the company hosted its own press conference to announce the Radeon R9 300-series of graphics as well as the new family of products based on the Fiji GPU. It started with the Fury X, a flagship $650 graphics card with an integrated water cooler that was well received. It wasn't perfect by any means, but it was a necessary move for AMD to compete with NVIDIA on the high end of the discrete graphics market.
At the event AMD also talked about the Radeon R9 Fury (without the X) as the version of Fiji that would be taken by board partners to add custom coolers and even PCB designs. (They also talked about the R9 Nano and a dual-GPU version of Fiji, but nothing new is available on those products yet.) The Fury, priced $100 lower than the Fury X at $549, is going back to a more classic GPU design. There is no "reference" product though, so cooler and PCB designs are going to vary from card to card. We already have two different cards in our hands that differ dramatically from one another.
The Fury cuts down the Fiji GPU a bit with fewer stream processors and texture units, but keeps most other specs the same. This includes the 4GB of HBM (high bandwidth memory), 64 ROP count and even the TDP / board power. Performance is great and it creates an interesting comparison between itself and the GeForce GTX 980 cards on the market. Let's dive into this review!
SLI and CrossFire
Last week I sat down with a set of three AMD Radeon R9 Fury X cards, our sampled review card as well as two retail cards purchased from Newegg, to see how the reports of the pump whine noise from the cards was shaping up. I'm not going to dive into that debate again here in this story as I think we have covered it pretty well thus far in that story as well as on our various podcasts, but rest assured we are continuing to look into the revisions of the Fury X to see if AMD and Cooler Master were actually able to fix the issue.
What we have to cover today is something very different, and likely much more interesting for a wider range of users. When you have three AMD Fury X cards in your hands, you of course have to do some multi-GPU testing with them. With our set I was able to run both 2-Way and 3-Way CrossFire with the new AMD flagship card and compare them directly to the comparable NVIDIA offering, the GeForce GTX 980 Ti.
There isn't much else I need to do to build up this story, is there? If you are curious how well the new AMD Fury X scales in CrossFire with two and even three GPUs, this is where you'll find your answers.
Subject: General Tech | July 9, 2015 - 03:02 PM | Ken Addison
Tagged: podcast, video, Samsung, 850, 2TB, amd, Fury, catalyst, 15.7, logitech, G230, G35, Intel, Braswell
PC Perspective Podcast #357 - 07/09/2015
Join us this week as we discuss the Samsung 850 Series 2TB, AMD Fury, Catalyst 15.7 and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath, and Allyn Malventano
Program length: 1:33:09
Subject: Graphics Cards | July 8, 2015 - 05:52 PM | Josh Walrath
Tagged: Win 10, whql, drivers, catalyst, amd, 15.7, 15.20
Sadly, it is not every month that we see a new AMD WHQL driver release. Several years back AMD made the promise that they would release WHQL drivers on a monthly basis, and for quite a while they kept to that promise. Engineering cuts, new architectures, and more challenges than ever with new technologies have essentially ended the monthly model. AMD does their best by putting out beta drivers when major titles are released, but it has been quite some time since we last saw a full WHQL.
Today we finally see the release of the very latest branch of the Catalyst drivers. Last month we saw the 15.15 drivers that were released with the AMD FuryX. We also had a fair share of beta drivers to keep users updated on the latest game profiles. The version that has been released today is based on the 15.20 code path and is officially known as Catalyst 15.7.
There are a lot of new features and support in this driver, which makes it a pretty big deal. I am guessing that it seems like such a big deal because major updates have been few and far between. This is AMD's first driver to support the Windows 10 Technical Preview.
The next set of features is very exciting for anyone who has any GCN based card, no matter the age. Virtual Super Resolution is enabled for all GCN 1.0 cards and above. The same goes for Frame Rate Target Control. AMD has included new CrossFire Profile Enhancements for many of the latest games and top sellers. The only new feature that does not support all GCN cards is that of AMD FreeSync with CrossFire support. As readers may remember, FreeSync did not previously work in a CrossFire solution. FreeSync itself is relegated to the newer members of the GCN family. The only other potential disappointment (and not new news at all) is still the lack of CrossFire support (much less FreeSync with CrossFire support) in DX9 titles.
AMD promises performance improvements as compared to the previous Omega drivers released last year. This is fairly typical, but people are already reporting some better performance and CPU usage in WinX previews based on the latest build. It is great to see AMD releasing a new set of drivers, but just like any addict... we can't wait for our next hit and what new features and performance they may bring.
Subject: Graphics Cards | July 7, 2015 - 11:59 AM | Sebastian Peak
Tagged: Radeon Fury, radeon, HBM1, amd
As reported by VideoCardz.com the upcoming Radeon Fury card specs have been leaked (and confirmed, according to the report), and the air-cooled card is said to have 8 fewer compute units enabled and a slightly slower core clock.
The report pictures a pair of Sapphire cards, both using the Tri-X triple-fan air cooler. The first is a reference-clocked version which will be 1000 MHz (50 Hz slower than the Fury X), and an overclocked version at 1040 MHz. And what of the rest of the specs? VideoCardz has created this table:
The total number of compute units is 56 (8 fewer than the Fury X), which at 64 stream cores per unit results in 3584 for the non-X GPU. TMU count drops to 224, and HBM1 memory speed is unchanged at 1000 MHz effective. VideoCardz is listing the ROP count at an unchanged 64, but this (along with the rest of the report, of course) has not been officially announced.
The board will apparently be identical to the reference Fury X
Retail price on this card had been announced by AMD as $549, and with the modest reduction in specs (and hopefully some overclocking headroom) this could be an attractive option to compete with the GTX 980, though it will probably need to beat the 980's performance or at least match its $500 price to be relevant in the current market. With these specs it looks like it will only be slightly behind the Fury X so pricing shouldn't be much of an issue for AMD just yet.
Subject: Graphics Cards, Processors | July 7, 2015 - 08:00 AM | Scott Michaud
Tagged: earnings, amd
The projections for AMD's second fiscal quarter had revenue somewhere between flat and down 6%. The actual estimate, as of July 6th, is actually below the entire range. They expect that revenue is down 8% from the previous quarter, rather than the aforementioned 0 to 6%. This is attributed to weaker APU sales in OEM devices, but they also claim that channel sales are in line with projections.
This is disappointing news for fans of AMD, of course. The next two quarters will be more telling though. Q3 will count two of the launch months for Windows 10, which will likely include a bunch of new and interesting devices and aligns well with back to school season. We then get one more chance at a pleasant surprise in the fourth quarter and its holiday season, too. My intuition is that it won't be too much better than however Q3 ends up.
One extra note: AMD has also announced a “one-time charge” of $33 million USD related to a change in product roadmap. Rather than releasing designs at 20nm, they have scrapped those plans and will architect them for “the leading-edge FinFET node”. This might be a small expense compared to how much smaller the process technology will become. Intel is at 14nm and will likely be there for some time. Now AMD doesn't need to wait around at 20nm in the same duration.
Subject: Graphics Cards | July 6, 2015 - 01:58 PM | Jeremy Hellstrom
Tagged: amd, r9 390x, overclocking
Now that [H]ard|OCP has had more time to spend with the new R9 390X they have managed to find the overclocks that they are most comfortable running on the card they used to test. They used MSI Afterburner 4.1.1 and first overclocked the card without changing voltages at all, which netted them 1150MHz core and 6.6GHz effective on the RAM. From there they started to raise to Core Voltage, eventually settling on +50 as settings higher than that resulted in lower maximum observed voltages due to the TDP being reached and the card throttling back. With that voltage setting they could get the card to run at 1180MHz, with the memory speed remaining at 6.6GHz as it is not effected by the core voltage settings, with the fan speed set 80% they saw a consistent 67C GPU temperature. How much impact did that have on performance and could it push the card's performance beyond an overclocked GTX 980? Read the full review to find out in detail.
"We take the new MSI Radeon R9 390X GAMING 8G video card and overclock it to it fullest and compare it with an overclocked GeForce GTX 980 at 1440p and 4K in today's latest games. Find out how much overclocking the R9 390X improves performance, and which video card is best performing. Can R9 390X overclock better than R9 290X?"
Here are some more Graphics Card articles from around the web:
- XFX R9 380 4G DD, XFX Rocks the DD Coolers Again! @ Bjorn3d
- Sapphire R9 390 Nitro 8GB @ Kitguru
- Sapphire R9 390X Tri-X 8GB @ Kitguru
- Visiontek Radeon R9 Fury X 4GB @ Kitguru
- AMD Radeon R9 Fury X @ Legion Hardware
- PowerColor Radeon R9 390 PCS+ 8 GB @ techPowerUp
- AMD R9 Fury X 4GB Graphics Card Crossfire @ eTeknix
- XFX R9 290 Double Dissipation @ Bjorn3d
- NVIDIA GeForce Chips Comparison Table (desktop) @ Hardware Secrets
- MSI GeForce GTX 980 Ti Gaming 6G Review @HiTech Legion
- Gigabyte G1 Gaming Geforce GTX 980 Ti Review @HiTech Legion
- MSI GeForce GTX 980 Ti Gaming 6 GB @ techPowerUp
- EVGA GeForce GTX 980 Ti Superclocked @ Bjorn3d
- EVGA GeForce GTX 980 Ti Superclocked+ Graphics Card Review @ Techgage
- EVGA GTX 980 Ti Superclocked+ ACX 2.0+ Review @ Hardware Canucks
Subject: Graphics Cards | July 3, 2015 - 08:45 PM | Sebastian Peak
Tagged: strix, rumor, report, Radeon Fury, asus, amd
A report from VideoCardz.com shows three listings for an unreleased ASUS STRIX version of the AMD Radeon Fury (non-X).
Image credit: VideoCardz
The listings are from European sites, and all three list the same model name: ASUS-STRIX R9FURY-DC3-4G-GAMING. You can find the listing from the above photo here at the German site Computer-PC-Shop.
Image credit: VideoCardz
We can probably safely assume that this upcoming air-cooled card will make use of the new DirectCU III cooler introduced with the new STRIX GTX 980 Ti and STRIX R9 390X, and this massive triple-fan cooler should provide an interesting look at what Fury can do without the AIO liquid cooler from the Fury X. Air cooling will of course negate the issue of pump whine that many have complained about with certain Fury X units.
The ASUS STRIX R9 390X Gaming card with DirectCU III cooler
We await offical word on this new GPU, and what price we might expect this particular version to sell for here in the U.S.A.
Subject: Graphics Cards | July 2, 2015 - 02:03 PM | Ryan Shrout
Tagged: amd, radeon, fury x, pump whine
According to a couple of users from the Anandtech forums and others, there is another wave of AMD Fury X cards making their way out into the world. Opening up the top of the Fury X card to reveal the Cooler Master built water cooler pump, there are two different configurations in circulation. One has a teal and white Cooler Master sticker, the second one has a shiny CM logo embossed on it.
This is apparently a different pump implementation than we have seen thus far.
You might have read our recent story looking at the review sample as well as two retail purchased Fury X cards where we discovered that the initial pump whine and noise that AMD claimed would be gone, in fact remained to pester gamers. As it turns out, all three of our cards have the teal/white CM logo.
Our three Fury X cards have the same sticker on them.
Based on at least a couple of user reports, this different pump variation does not have the same level of pump whine that we have seen to date. If that's the case, it's great news - AMD has started pushing out Fury X cards to the retail market that don't whine and squeal!
If this sticker/label difference is in fact the indicator for a newer, quieter pump, it does leave us with a few questions. Do current Fury X owners with louder coolers get to exchange them through RMA? Is it possible that these new pump decals are not indicative of a total pump change over and this is just chance? I have asked AMD for details on this new information already, and in fact have been asking for AMD's input on the issue since the day of retail release. So far, no one has wanted to comment on it publicly or offer me any direction as to what is changing and when.
I hope for the gamers' sake that this new pump sticker somehow will be the tell-tale sign that you have a changed cooler implementation. Unfortunately for now, the only way to know if you are buying one of these is to install it in your system and listen or to wait for it to arrive and take the lid off the Fury X. (It's a Hex 1.5 screw by the way.)
Though our budget is more than slightly stretched, I'm keeping an eye out for more Fury X cards to show up for sale to get some more random samples in-house!