Subject: Graphics Cards | June 18, 2015 - 05:05 PM | Jeremy Hellstrom
Tagged: amd, Hawaii XT, tonga, pitcairn
So far the only published review with benchmarks is this one from Legion Hardware, with many others including Ryan's to follow as the benchmark monkeys are whipped to a furious pace. The initial results show roughly what has been expected, the R9 390X is roughly 10% faster overall than the 290X and about 6% faster than the base 390 model which itself is roughly 8% faster than the previous 290. The 380 shows a similar 6% gain over the 285 and performance wise can tie the GTX 960. Bear in mind this is very preliminary review, as time is needed to properly test and to overclock the cards, keep your eyes peeled for more reviews and cards from other sources.
"Firstly we would like to thank HIS for supplying their HIS Radeon R9 390X IceQ X2 OC 8GB, R9 390 IceQ X2 OC 8GB and R9 380 IceQ X2 OC 2GB graphics cards. The cooling performance of their IceQ X2 cooler was excellent on all three cards and they look very eye catching as well."
Here are some more Graphics Card articles from around the web:
Fiji: A Big and Necessary Jump
Fiji has been one of the worst kept secrets in a while. The chip has been talked about, written about, and rumored about seemingly for ages. The chip has promised to take on NVIDIA at the high end by bringing about multiple design decisions that are aimed to give it a tremendous leap in performance and efficiency as compared to previous GCN architectures. NVIDIA released their Maxwell based products last year and added to that this year with the Titan X and the GTX 980 Ti. These are the parts that Fiji is aimed to compete with.
The first product that Fiji will power is the R9 Fury X with integrated water cooling.
AMD has not been standing still, but their R&D budgets have been taking a hit as of late. The workforce has also been pared down to the bare minimum (or so I hope) while still being able to design, market, and sell products to the industry. This has affected their ability to produce as large a quantity of new chips as NVIDIA has in the past year. Cut-backs are likely not the entirety of the story, but they have certainly affected it.
The plan at AMD seems to be to focus on very important products and technologies, and then migrate those technologies to new products and lines when it makes the most sense. Last year we saw the introduction of “Tonga” which was the first major redesign after the release of the GCN 1.1 based Hawaii which powers the R9 290 and R9 390 series. Tonga delivered double the tessellation performance over Hawaii, it improved overall architecture efficiency, and allowed AMD to replace the older Tahiti and Pitcairn chips with an updated unit that featured xDMA and TrueAudio support. Tonga was a necessary building block that allowed AMD to produce a chip like Fiji.
Subject: General Tech | June 17, 2015 - 05:13 PM | Jeremy Hellstrom
Tagged: amd, Samsung, cloud monitor
AMD and Samsung will be releasing several 'Cloud Monitors', a design previously know as thin clients, powered by a 2.2GHz dual-core AMD GX222 APU with an unspecified 655MHz GPU and 4GB of DDR3-1600 RAM. The TC222W will have a 21.5" screen and the TC242W a 23.6" screen, both will be 1080p and come with three USB 3.0 slots, four USB 2.0 slots and an Ethernet port. The storage will be cloud based, hence the name, and will be similar to HP's MT245 and T420 which will also be powered by AMD APUs. The thin client is making a return to the office and with AMD offering chips with configuration TDPs between 5W to 25W they may find themselves successful in this returning segment of the marketplace. Read more at The Inquirer.
"SAMSUNG AND AMD have joined forces to announce a line of all-in-one 'cloud monitors' featuring integrated thin client technology powered by AMD's Embedded G-series system on chip (SoC)."
Here is some more Tech News from around the web:
- Flexible PRAM: Not a bendy baby carriage, but infinitely cooler @ The Register
- Flash is fallible. But you'd rather have an AFA than spinning rust @ The Register
- Should You Build Your Own Steambox? @ eTeknix
- Stephen Elop gets the boot as Microsoft pushes for Windows Phone success @ The Inquirer
- Apple De-Certifies Monster Cables After Lawsuit Against Beats @ Slashdot
- Acer has no acquisition plans, says CEO @ DigiTimes
- NikKTech & Seagate Summer Worldwide Giveaway
- Radeon R9 380 Preview and Win a 290X @ HardwareHeaven
- The Tech ARP + Western Digital My Passport Wireless Contest
Subject: Graphics Cards | June 17, 2015 - 02:36 AM | Ryan Shrout
Tagged: hbm, fury x2, fury x, Fury, Fiji, dual gpu, amd
During the PC Gamer PC Gaming Show, much of the industry was on hand to talk about its take on the state of PC gaming. While there, AMD took the opportunity to show off the dual-GPU Fiji-based AMD Radeon R9 Fury X2 card. (Editor's note: we don't have official confirmation on that name for the card, but it would make sense, right? We'll go with that for the time being.) We don't know much about the specifics on clocks, shader counts or performance, but we do know that AMD is able to cram a HUGE amount of GPU compute capability into an incredibly small space thanks to the high bandwidth memory innovation.
Shown at the PC Gaming Show tonight...
Interesting, just a couple of days ago we were sent this image anonymously:
What's interesting here is that I was told "this is how they test" the GPUs before installing the water block on it. Those are high-end CPU coolers that have been modified slightly to be installed on the lay-flat Fury X2 PCB. This gives you an idea of the development process of building a graphics card like this...
A little blurry, but still informative.
This image, posted by Anshel Sag, Staff Technologist and Technical Writer at Moor Insights & Strategy, shows the bare PCB with the two Fiji GPUs and their HBM memory stacks. (Also, note those "Moor" logos are not really printed on the GPU dies...) There are two 8-pin power connectors on the PCB as well, odd considering that the single GPU Fury X uses the same configuration.
This card has been promised to us in the fall, though pricing and power and performance are to be discussed later. 2015 just keeps getting better for PC gamers!!
Subject: General Tech, Graphics Cards | June 16, 2015 - 05:34 PM | Tim Verry
Tagged: water cooling, SFF, Fiji, E3 2015, E3, dual fiji, amd
AMD revealed a new liquid cooled small form factor PC called Project Quantum during an E3 livestream today.
On the outside, an angled dual compartment aluminum case with rounded edges houses the processing hardware in the bottom and all the cooling components in the top part. AMD is using liquid cooling for the processor and graphics with the tubing running up the center column joining the two pieces together to a radiator or radiators. Red LEDs light up the center column while Radeon R9 branding sits in the bottom left corner.
While at first glance that Radeon R9 branding might be unassuming, it is actually referring to AMD's latest Fiji architecture. That's correct, Project Quantum is part of the Fiji product family and is, in fact, powered by two AMD Fiji-based graphics procesors!
Update: AMD has posted a behind-the-scenes video on the development of Project Quantum which you can watch below.
In the video, AMD reveals that they are using a modified ASRock Z97E-ITX/ac motherboard (thanks to djotter in the comments for pointing that out) which means that Project Quantum is using an Intel Haswell processor in addition to the two Fiji-based GPUs. AMD has removed all of the rear IO connectors save two USB 3.0 ports and an Ethernet jack. They have also moved the 8-pin CPU power connector to the back panel of the board next to the USB ports. My guess is that they did this for cable management and height restriction reasons within the bottom compartment. Specifically, from the CAD render shown in the video, it appears that the AMD graphics card sits horizontally on top of the motherboard which meant that at least some of the rear IO ports had to be removed or relocated.
Another bit of information from that AMD video is that Project Quantum is using what looks like an external power supply. The power brick connects to the system over a single cable to an internal board. This board provides power to a Pico PSU that is plugged into the ATX 24-pin connector on the motherboard and provides power to the AMD branded Solid State Drive (SSD) as well as the motherboard and CPU 8-pin connectors (which have both been modified to right angles for height and cable management reasons). The internal power board that connects to the socket at the back likely also powers the Radeon graphics card via PCI-E connectors, but it is difficult to tell from the photo (it is that red PCB towards the top of the photo).
Interestingly AMD has switched out the power and USB 3.0 headers with right angle models and removed the blue ASRock heatsinks covering the VRMs and PCH. AMD is instead using two large waterblocks to cool the components on the motherboard and graphics card. A large radiator and pump sit in the top compartment cooled by an 180mm Enermax Apollish fan. The 180mm radiator should result in quieter, or at least less annoying, fan noise since the large fan can spin slower while moving similar amounts of air as smaller fans paired with 120 or 140mm radiators. Using a single large radiator for both the CPU and GPU is an interesting choice here, and I think a correct one.
A rendering of the water loop layout on Project Quantum. Image from AMD with annotations by Aibohphobia.
It was actually djotter and Aibohphobia in the comments who spotted the Pico PSU and provided an example. (I did not notice that in the video initially, so thanks for pointing that out!) This power brick and tiny Pico PSU setup would certainly help to explain how AMD was able to make Project Quantum so thin (though an external PSU isn't necessarily a bad thing). The Pico PSU does suggest that the dual Fiji GPUs may be closer to lower end R9 Nanos than two high end Fury Xs (heh) or maybe some other yet unannounced cut-down Fiji chip entirely.
(End of update)
During the PC Gamer E3 Twitch stream, AMD CEO Lisa Su showed off Project Quantum, and Ken was able to snap a photo of the back panel.
Project Quantum has, from left to right, a single power input (see above), two analog audio jacks, two USB 3.0 ports, an Intel-powered Gigabit Ethernet jack, four USB 2.0 ports, and a single horizontal PCI slot. A Radeon R9 graphics card is installed in this slot and features three DisplayPort and one HDMI 1.4 video outputs. We still do not know all the specs of this card, but is is Fiji-based and supports LiquidVR along with AMD's other features including FreeSync and Frame Rate Target Control.
(End Update 9:30PM)
Beyond that, we do not know many details on Project Quantum. From the other announcements around Fiji today, particularly the R9 Nano and R9 Fury X, this little machine is going to be a powerhouse with impressive power efficiency and performance per watt – especially for its size!
Of course, pricing and availability were not discussed at the event. Stay tuned to PC Perspective as we get more details closer to its official release!
Subject: Graphics Cards | June 16, 2015 - 05:22 PM | Ryan Shrout
Tagged: radeon, hbm, fury x, Fury, Fiji, E3 2015, E3, amd
It's finally official: AMD Radeon R9 Fury X and Fury graphics cards are coming soon. Here's the details you need to know:
|AMD Fury X||AMD Fury||AMD R9 290X|
|Compute Capability||8.6 TFLOPS||??||5.6 TFLOPS|
|Transistor Count||8.9 billion||??||6.3 billion|
|Availability||June 24th||July 14th||Now|
There is still a lot of information that AMD is saving for the official release, but those look to be some impressive graphics cards at first glance! The AMD Fury X is the small form factor water cooled version that we saw leaked this weekend while the AMD Fury (non-X) will be air cooled. It wasn't shown on stage though, so we can only guess what it will look like.
AMD's Joe Macri said on stage that the cooler they designed is built for up to 500 watts but that the board was only going to draw 275 watts, while keeping the board temperature down to 50C!
Other tidbits include 6-phase power with 400A (!!) power delivery for overclocking, an 8-LED user addressable array for performance load monitoring and 1.5x performance per watt improvement when compared to the R9 290X. That can help us estimate card performance but we'll dive more into that later.
Finally, though only a tease, AMD did say they were planning a dual-GPU variant of Fiji coming "in the fall."
Subject: Graphics Cards | June 16, 2015 - 05:02 PM | Ryan Shrout
Tagged: radeon, r9 nano, R9, amd
On stage at the AMD E3 2015 press conference, AMD's CEO Lisa Su announced the Radeon R9 Nano, a 6-in PCB small form factor graphics card that will feature "2x the performance per watt of the R9 290X" as well as "significantly" more performance than the R9 290X.
We are looking for more information but because its branded R9 I don't know for sure if it's Fiji or Hawaii. I would assume that the advantages of HBM for form factor and power efficiency would tell us it uses AMD latest GPU in some cut down variation.
Availability later this summer.
UPDATE: Sources on the scene confirm it is Fiji powered!
Subject: Graphics Cards | June 16, 2015 - 12:27 AM | Ryan Shrout
Tagged: r9 300, hbm, hawaii, Fiji, E3 2015, E3, amd
Join us tomorrow to learn all about AMD's plans for the next generation of GPUs! AMD is hosting a live stream of the event at 9am PT / 12pm ET and the PC Perspective team will be live blogging as well.
AMD E3 2015 Press Conference and Live Blog
9am PT / 12pm ET - June 16th
Need a reminder? Join our live mailing list!
We expect to see official details of the R9 300-series of products of which there have been many leaks as well as the final details of the AMD Fury and Fury X products based on the new Fiji GPU. Join the team as we live blog the event and learn along with you!
Subject: Graphics Cards | June 13, 2015 - 02:31 AM | Ryan Shrout
Tagged: Skylake, leak, hbm, fury x, Fury, Fiji, amd
You just never know what's going to come your way on Facebook on a Friday night. Take this evening for me: there I was sitting on the laptop minding my own business when up pops a notification about new messages to the PC Perspective page of FB. Anonymous user asks very simply "do you want pictures of skylake and r9 fury x".
With a smirk, knowing that I am going to be Rick-rolled in some capacity, I reply, "sure".
Well, that's a lot more than I was expecting! For the first time that I can see we are getting the entire view of the upcoming AMD Fury X graphics card, with the water cooler installed. The self-contained water cooler that will keep the Fiji GPU and its HBM memory at reliable temperatures looks to be quite robust. Morry, one of our experts in the water cooling fields, is guessing the radiator thickness to be around 45mm, but that's just a guess based on the images we have here. I like how the fan is in-set into the cooler design so that the total package looks more svelte than it might actually be.
The tubing for the liquid transfer between the GPU block and the rad is braided pretty heavily which should protect it from cuts and wear as well as help reduce evaporation. The card is definitely shorter compared to other flagship graphics cards and that allows AMD to output the tubing through the back of the card rather than out the top. This should help in smaller cases where users want to integrate multi-GPU configurations.
This shot shows the front of the card and details the display outputs: 3x DisplayPort and 1x HDMI.
Finally, and maybe most importantly, we can see that Fiji / Fury X will indeed require a pair of 8-pin power connections. That allows the card to draw as much as 375 total watts but that doesn't mean that will be the TDP of the card when it ships.
Also, for what it's worth, this source did identify himself to me and I have no reason to believe these are bogus. And the name is confirmed: AMD Radeon Fury X.
Overall, I like the design that AMD has gone with for this new flagship offering. It's unique, will stand out from the normal cards on the market and that alone will help get users attention, which is what AMD needs to make a splash with Fiji. I know that many people will lament the fact that Fury X requires a water cooler to stay competitive, and that it might restrict installation in some chassis (if you already have a CPU water cooler, for example), but I think ultra-high-end enthusiasts looking at $600+ GPUs will be just fine with the configuration.
There you have it - AMD's Fury X graphics card is nearly here!
Subject: General Tech | June 12, 2015 - 05:14 PM | Jeremy Hellstrom
Tagged: hbm, leak, fury x, amd, Fiji, radeon, 390x
The rumours are flying today, with some purportedly leaked performance results of AMD's upcoming Fiji XT based card, the Fury X. The leak at Videocardz shows the results of 3DMark's Firestrike Ultra and Extreme for an AMD Radeon Graphics Processor in single card configuration and Crossfire results for Extreme only. The results show a card that can keep up with the Titan X and by extension the new GTX 980 Ti as well. At 1440p resolution, the Firestrike Extreme benchmark, the new AMD card seems to lag slightly behind NVIDIA in single and dual GPU configurations, but not by much while in the Ultra test at 4K the AMD GPU pulls ahead, likely thanks to the new HBM-1 memory.
They also claim to have a source who has run the new GPU though the CompuBench suite which gives us more information about the general architecture. The tests show a card with 64 Compute Units, which translates into 4096 Stream Cores if it is designed similarly to current Radeons. The tests also confirm the 1050MHz core clock and more interestingly the 4GB of HBM-1 will be clocked at 500MHz memory clock with a 4096-bit bus, which is good news for those who like their resolutions as high as they can go. Nothing is confirmed yet but these numbers bode well for the new Radeon architecture if they are true.
(Image credit: VideoCardz.com)