Jonsbo Launches Ribbed UMX5 Mid Tower Case With RGB LEDs

Subject: Cases and Cooling | December 10, 2017 - 03:06 AM |
Tagged: tempered glass, RGB LED, RGB, mid tower, jonsbo, eatx, atx, aluminum case

Jonsbo, a Shenzhen based case manufacturer founded in 2010 has unleashed a new stylish flagship mid tower called the UMX5. The new case measures 507mm x 224mm x 485mm and is constructed of a steel frame wrapped in anodized aluminum-magnesium alloy and tempered glass. The new case has a ribbed design that runs vertically over the top and front panels. Jonsbo claims that the valleys have been sandblasted to dull their look while the 5.5mm tall wiredrawn peaks/ribs have been polished to enhance the contrast and catch the eye.

Jonsbo UMX5 Black.png

There is a gap of 3.5cm between the bottom of the main chamber of the case and the foot for ventilation and looks (it is under-lit with RGB LEDs of course). The back panel is fairly plain though they have opted for a honeycomb style fan grill for the included 120mm exhaust fan. The side panels steal the show with 5mm thick double sided tempered glass on both sides of the case to show off all of the internals (I am less sold on the idea of the right-side panel being glass as that means I would have to actually cable manage and not just hide it all behind the motherboard tray! Custom sleeved PSU cables that are the exact length needed are going to be essential to making builds in this case look good. The tempered glass does have a bit of a tint to it though so it's not the end fo the world.)

The front 1/3 or so of the left side panel is overlaid by a honeycomb pattern that can be illuminated by a RGB LED. Front I/O includes the usual two USB 3.0, two USB 2.0, and two audio jacks as well as a button to change the LEDs color scheme or to turn them off completely.

Jonsbo UMX5 Silver_light blue.png

Users can set the case LEDs to color change mode where it will cycle through 264 colors, to a single color of red, green, blue, yellow, purple, pink, turquoise, or orange, to a (red only) breathing mode, or set to off.

The UMX5 is designed for ATX motherboards, but it can work with a small number of E-ATX models (305mm x 265mm maximum). Further, the UMX5 mid tower supports CPU coolers up to 166mm tall and graphics cards up to 325mm long. There are four 3.5” hard drive bays with red anodized aluminum sleds as well as room for two 2.5” drives behind the motherboard tray. The PSU sits vertically behind the motherboard tray and hidden towards the front of the case behind a glass cover along with the hard drives.

As far as cooling, there are fan mounting points in the top, bottom, and rear though Jonsbo only includes a single 120mm rear fan. Users can add up to two 120mm fans to the top and two 120mm fans to the bottom. If they are water cooling, they can use up to two 240mm radiators top and bottom and a single 120mm in the rear. If using a thick radiator, you can mount the bottom fans outside of the case in the 35mm ventilation chamber gap.

Jonsbo UMX5 Silver.png

Jonsbo’s UMX5 is a decent looking case that will come in either black (with red accents on the HDD trays and around the left side panel) or silver.

The case has an MSRP of 199.99 € (Euro) including 19% VAT (~$200 USD sans VAT). I can’t seem to find it available online anywhere quite yet, but it should hit Europe shortly. It’s not clear how long it will be (if ever) until it hits the US, however.

In general, I like the look of the case, though I wish the red drive trays and side panel could be swapped out for different colors. The silver UMX5 is a bit better in this respect as it does not have the red border on the left side panel (it’s all silver except the drive trays which are red), but the black UMX5 is stuck with the red border which is okay if you are also using red LEDs but just looks odd if you are going with any other color. Beyond that the case is on the pricier side of things, but if the build quality (and cable management) is truly there the modders and enthusiasts will come!

Source: Jonsbo

Lian Li PC-M25: mATX Enclosure with 5 Hot-Swap HDD Bays

Subject: Cases and Cooling | February 9, 2016 - 01:33 PM |
Tagged: small form-factor, SFF, PC-M25, micro tower, mATX, Lian Li, hot-swap, enclosure, case, aluminum case

The PC-M25 is Lian Li’s latest enclosure; a small micro-ATX tower with an emphasis on storage.

m25-000.jpg

“The PC-M25 includes a hot-swap HDD rack where users can conveniently install and remove up to five 3.5” drives with rubber suspension and without needing tools. The bottom HDD tray can mount an additional three 2.5” or two 3.5” drives. This makes a total of as many as seven 3.5” hard drives for advanced RAID storage applications.”

While a small form-factor design (all aluminum, of course), there is still room for a full system including long graphics cards and power supplies; though you’ll want a lower-profile CPU cooler as there is only 80 mm of clearance above the processor. Fans are included, with 140 mm intake and 120 mm exhaust pre-installed, though there is only a screen filter on the bottom intake (below the PSU).

m25-009.jpg

Specifications:

  • Model: PC-M25 A/ B
  • Case Type: Mini Tower Chassis
  • Color: Silver, Black
  • Material: Aluminum
  • M/B Type: Micro-ATX, Mini-ITX
  • Expansion Slot: 4
  • Storage:
  • HDD rack: 3.5" HDD x5 (Hot-swap)
  • HDD tray: 2.5" HDD x3 or 3.5" HDD x2
  • System Fan (Front) 140mm Fan x1; System Fan (Top) 120mm Fan x1
  • I/O Ports: None
  • Maximum Compatibility
  • VGA Card length: 410mm
  • PSU length: 230mm 
  • CPU cooler height:80mm
  • PSU Type: ATX
  • Dimensions (W x H x D) 199 x 322 x 441 mm (7.83 x 12.68 x 17.36 in)
  • Net Weight: 3.74 kg (8.25 lbs)

storage_options.jpg

Storage options for the PC-M25

The PC-M25 will be available this month with an MSRP of $169.

Source: Lian Li

Lian Li DK-04 Sit / Stand Computer Desk Enclosure

Subject: Cases and Cooling | January 11, 2016 - 05:17 PM |
Tagged: workstation, standing desk, Lian Li, enclosure, DK-04, desk chassis, CES 2016, CES, aluminum case

Lian Li has introduced a new electronic sit/stand desk chassis, the DK-04, which holds a full system under its tempered glass surface and raises and lowers at the push of a button.

DSC_0312.jpg

On display at their booth at CES last week, the DK-04 offers a compelling option for someone interested in a standing workstation, with the added benefit of housing a powerful custom rig (and looking really cool in the process).

DSC_0316.jpg

There is room under the glass desktop (this model does not use a drawer) for up to an ATX motherboard with one dual-slot expansion card, which can be used with a GPU up to 320 mm in length. CPU coolers of up to 120 mm are supported, along with 120 mm width radiators up to 480 mm long.

DSC_0313.jpg

The front panel offers 4x USB 3.0 ports, RGB lighting controls, and a 5.25-inch optical drive bay; and there is internal storage support for up to 8x 3.5-inch or 2.5-inch hard drives. The entire unit is 47.24 inches wide, 29.53 inches deep, and can be adjusted from approximately 30 - 46 inches in height.

DSC_0314.jpg

The control panel for the electric height adjustment includes the option for up to 4 presets, allowing the desk to easily adjust to various pre-defined seated and standing positions.

Pricing and availability have yet to be announced, but expect this to come in higher than IKEA's popular solution (which doesn't offer a the functionality of a full PC enclosure inside, of course).

Source: Lian Li

CES 2016: Lian Li Puts Mini-ITX on a Yacht with the PC-Y6

Subject: Cases and Cooling | January 9, 2016 - 12:05 PM |
Tagged: Yacht, SFX, PC-Y6, mITX, mini-itx, Lian Li, CES 2016, CES, aluminum case

Lian Li was showing a Yacht-themed aluminum chassis at their booth on the CES show floor, and this is certainly among the most unusual designs we've seen for an enclosure.

DSC_0305.jpg

There is room for a powerful system within the enclosure, as the length of the boat design (just over 30 inches) allows for longer graphics cards (up to 300 mm supported). You will need an SFX power supply for this mini-ITX build, and CPU coolers will need to be of the low-profile variety with a 60 mm clearance available.

Specifications for the PC-Y6:

  • Motherboard Type: Mini-ITX
  • Body Material: Aluminum
  • Colors: Silver, white (pictured)
  • Expansion Slot: 2
  • Compatibility: VGA Card length: 300 mm; CPU cooler height: 60 mm
  • HDD bay: 3.5” HDD x2; 2.5” HDD x2
  • PSU Type: SFX
  • System Fan: 120mm x1
  • I/O Ports: None
  • Dimensions (W x H x D) 764 x 293 x 259 mm (30.08 x 11.54 x 10.20 inches)
  • Net Weight: 4.9 kg (10.8 lbs)

DSC_0308.jpg

This is obviously not going to appeal to everyone, but if you've followed Lian Li over the years they release these novel enclosures from time to time. It was very impressive looking in person and feels well constructed with Lian Li's usual high level of fit and finish.

rgb_kit.jpg

An RGB color changing system in integrated into the enclosure

This will not see a wide release, and no specifics on pricing or availability were released.

Coverage of CES 2016 is brought to you by Logitech!

PC Perspective's CES 2016 coverage is sponsored by Logitech.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Lian Li

CES 2016: In Win H-Frame Open Air Chassis and PSU

Subject: Cases and Cooling | January 8, 2016 - 07:03 PM |
Tagged: PSII, open air case, in win, H-Frame, enclosure, CES 2016, CES, aluminum case

Among the enclosures on display at the In Win booth at CES 2016 was the H-Frame (not to be confused with the H-Tower), a striking, open-air enclosure with tempered glass side panels.

DSC_0230.jpg

In Win highlights these features for the enclosure:

  • Stunning lighting effect with light controller
  • Open-air layered aluminium metal plate structure provides excellent thermal performance
  • Supports USB 3.1 TYPE-C Super Speed transfer interface
  • Convenient water cooling pump holder for versatile cooling option
  • Equipped with 2 x 3.5”/2.5” SATA HDD modules and Tool-Free EZ-Swap HDD tray
  • Unique In Win logo thumb screws

Every detail of the industrial design was clearly considered with the design of this H-Frame chassis, which has a very high level of fit and finish throughout. I was able to go hands on with the enclosure, which is very large in person at 23.5 inches high, 22.9 inches deep, and 10.6 inches wide. The tempered glass sides are tinted, which helps to reduce visible cable clutter behind the motherboard tray.

DSC_0234.jpg

Besides the glass side panels, the entire construction is aluminum, and inside there is a full tower, standard ATX layout. No so standard is the external chassis design, which is a collection of aluminum plates that leave the outer walls of the case open to the air. This is not ideal for noise or dust of course, but this is the tradeoff with open-air designs which focus on cooling and ease of installation.

An interesting addition to the H-Frame announcement is a matching power supply from In Win, which is specifically designed for this limited edition enclosure. The matching SII-1065W is a very large, fully modular PSU that exceeds the width of standard ATX designs, classified as a PSII size PSU. Offering 1065 watts of power, this PSU has an efficiency equivalent to 80 Plus Platinum according to In Win.

DSC_0228.jpg

Style matters, of course, so the PSU is color matched and includes internal lighting to match the H-Frame, visible through the clear PSU side panel which is designed to face the windowed side of the enclosure.

H-Frame specifications from In Win:

  • Case size: Full Tower
  • Material: Aluminum Metal Structure
  • Motherboard form-factor: E-ATX / ATX / Micro-ATX / Mini- ITX (max 12” x 13”)
  • Expansion slots: PCI-E Slot x8
    • Supports High-end Graphic Card up to 440mm (Without HDD Tray)
  • Drive bays (internal): 3.5” / 2.5” x6
    • (Supports SATA HDD EZ-Swap Module x 2)
  • Thermal solution support:
    • 120mm Top Fan x3
    • 120mm Rear Fan x1
    • 360mm Top Radiator (height up to 40mm)
    • Supports at least 185mm height CPU heatsink
  • Power Supply: Supports ATX12V & EPS12V up to 210mm 
  • Dimensions: 597 x 271 x 582mm (23.5” x 10.6” x 22.9”)

DSC_0259.jpg

Pricing and availability were not available for the H-Frame Open-Air Chassis and SII-1065W power supply.

Coverage of CES 2016 is brought to you by Logitech!

PC Perspective's CES 2016 coverage is sponsored by Logitech.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: In Win

CES 2016: In Win Launches H-Tower Transforming Enclosure

Subject: Cases and Cooling | January 8, 2016 - 11:32 AM |
Tagged: tempered glass, PSU, power supply, in win, enclosure, CES 2016, CES, aluminum case

The centerpiece of the In Win booth at this year’s CES is the massive H-Tower enclosure, a limited edition chassis that transforms from an enclosure to an open platform automatically. The company had a version of this enclosure at Computex, but now a final 6th generation of the concept is set for e-tail availablility.

DSC_0247.jpg

The transformation is a sight to behold (which in this final version now uses a medical grade arm for smooth operation), and has the practical benefit of providing easy access to your system components. In Win has provided a video to demonstrate the H-Tower, imbedded below:

Beyond the unique mechanical functionality, the H-Tower is about as premium an enclosure as you could imagine, beginning with a brushed aluminum exterior with lighting effects that can be controlled with a mobile app. There is also an integrated laser lighting system which “indicates the safe opening area on the floor around it” – an important point to consider once you see the enclosure in action.

DSC_0239.jpg

Front I/O includes three USB 3.0 ports and a USB Type-C port

The interior supports motherboards up to E-ATX, graphics cards up to 340 mm, tall CPU coolers up to 200 mm, and there is room for a larger liquid cooling well as well with three 120 mm fan opening supporting up to a 360 x 35 mm radiator. Storage options are limited to a single 3.5-inch HDD with room for four 2.5-inch SSDs. Large power supplies of up to 230 mm are supported as well.

DSC_0242.jpg

There are two versions of the H-Tower, with the titanium version shown at the booth as well as an official ASUS Republic of Gamers version that is black with red accents.

h_tower_colors.jpg

The enclosure will be available in February in North America, and Newegg already has a pre-order listing for a staggering $2399.

Coverage of CES 2016 is brought to you by Logitech!

PC Perspective's CES 2016 coverage is sponsored by Logitech.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: In Win

Lian Li Introduces PC-18 Aluminum Mid-Tower Enclosure

Subject: Cases and Cooling | October 15, 2015 - 09:46 PM |
Tagged: PC-18, mid-tower, Lian Li, enclosure, case, aluminum case

Lian Li has announced a new mid-tower enclosure for the North American market, and the PC-18 has a decidedly retro style.

18-018.jpg

Dual 5.25-inch external optical drive bays? Boxy styling? Bare metal interior? The hallmarks of a 1990's case are here with Lian Li's new PC-18 mid-tower, but there is an interesting addition to a classic design with a hinged radiator bracket in the center of the enclosure.

18-005.png

The PC-18 uses this bracket to support up to 360 mm long radiators, though for a CPU I can see how the installation process for a self-contained system (depending on hose length) might be a bit tricky considering the hinge is on the right side, and closing the bracket blocks access to the CPU.

18-017.jpg

No rear exhaust fan opening? Retro.

For a GPU, on the other hand, I could see how the bracket's central positioning and hinged mount would make installing a card like AMD's Fury X really convenient.

Here are the full specs:

  • Model: PC-18 A/B
  • Case Type: Mid Tower Chassis
  • Color: Black or Silver
  • Material: Aluminum
  • Expansion Slot:    7
  • MB Type: ATX, Micro-ATX
  • External drive bays: 2x 5.25"
  • Internal drive bays: (HDD bay) 3.5" HDD x3, 2.5" HDD x1; (Remove HDD rack) 3.5" HDD x2 or 3.5"/2.5" HDD x1
  • System Fans: (Front) 120mm x2; (Top) 140mm x1; (Side) 120mm x3 or 140mm x2
  • I/O Ports: USB 3.0 x2, HD Audio
  • PSU Type: ATX PSU
  • Maximum VGA Card length: 285 mm (410 mm with HDD bay removed)
  • CPU cooler height: 160mm
  • PSU length: 160mm
  • Dimensions: (W) 210mm (H) 452mm (D )490mm
  • Net Weight: 5kg

The Lian Li PC-18 carries an MSRP of $149.99 and availability is listed as "coming soon".

Source: Lian Li

Lian Li Announces X510 Aluminum Full-Tower Enclosure

Subject: Cases and Cooling | September 17, 2015 - 07:00 AM |
Tagged: Lian Li, full tower, enclosure, cases, aluminum case

Looking for a super deluxe way to hold just about any size rig? Lian Li has a sophisticated looking option with the new X510 full-tower enclosure.

x510-000.jpg

An all-aluminum case (of course - it's Lian Li!) with a no-nonsense design aesthetic and very roomy interior, the X510 still keeps a fairly trim profile thanks to the omission of 5.25-inch drive bays.

Here are some of the key features from Lian Li:

  • Isolated air chambers for efficient cooling
  • Fits huge components – 330mm VGA Card, 180mm CPU cooler, 245mm PSU length
  • Eight expansion slots
  • Support for eight total drives
  • Tempered glass window for showing off hardware
  • Included fan speed controller

x510-001.jpg

The glass side window and included fan controller are nice touches, and while the X510 carries a steep MSRP it doesn't seem out of place for an all-alumimum case like this (depending on performance). So what is pricing/availability? The X510 should be available later in September for $399.

Source: Lian Li

Lian Li Releases PC-V33 Small Footprint ATX Cube Enclosure

Subject: Cases and Cooling | September 3, 2015 - 01:04 PM |
Tagged: Test Bench, PC-V33, Lian Li, enclosure, atx case, aluminum case

Lian Li has announced a new enclosure along the lines of the PC-Q33 (a mini-ITX enclosure we reviewed here), but this new PC-V33 houses a full ATX motherboard inside its cube-like, hinged exterior.

v33-000.jpg

If you’ve looked into open test benches at all you’ll really appreciate the design of the PC-V33, which essentially takes that idea and adds a cover that conveniently folds down on a hinge, exposing all components. This is a very unconventional design, and one I really appreciated when reviewing the mini-ITX version. So what’s new besides the larger size and support for ATX motherboards?

Here’s a quick rundown of the enclosure’s features:

  • Unique flip-open canopy, opens to test bench style ease of access
  • Full ATX size build in compact mid-tower case
  • Full sized PSU and GPU card supported
  • Up to 240mm internal radiator support
  • Redesigned rear vents with increased air flow
  • New shock-absorbing drive cage
  • Easy-open side doors with no screws and toolless design throughout
  • Black or silver full aluminum or add a tempered glass side wall

In addition to supporting full-sized components and 240mm radiators, there is also support for tower air coolers up to 190mm high, and the case also features a rubber-damped hard drive cage (and drives have their own 120mm exhaust fan). How much space will the PC-V33 take up on your desk? Dimensions are (WxHxD) 13.15" x 13.86" x 15.35", which are on par with an open test bench case.

v33-007.jpg

The MSRP of the standard version is $199 and the version with a glass side panel is $229. The PC-V33 will available in early September.

Source: Lian Li
Manufacturer: Lian Li

Introduction and First Impressions

The Lian Li PC-Q33 is a mini-ITX enclosure with a cube-like appearance and a hinged construction that makes it easy to access the components within.

Q33_Main.jpg

Introduction

When a builder is contemplating a mini-ITX system the primary driver is going to be the size. It’s incredible that we've reached the point where we can have a powerful single-GPU system with minimal (if any) tradeoffs from the tiny mITX form-factor, but the components need to be housed in an appropriately small enclosure or the entire purpose is defeated. However working within small enclosures is often more difficult, unless the enclosure has been specifically designed to account for this. Certainly no slouch in the design department, Lian Li is no stranger to small, lightweight mini-ITX designs like this. The NCASE M1 (a personal favorite) was manufactured by the company after all, and in some ways the PC-Q33 is reminiscent of that design - in build quality and materials if nothing else. The Q33 features aluminum construction and is very light, and while compact the design of the enclosure allows for effortless component installation. The secret? A hinged design that allows the front of the enclosure to swing down providing full access to the interior.

Q33_Fold_Angle.jpg

This approach to accessibility with a small enclosure is a welcome one, and especially so considering the price of the PC-Q33, which retails for $95 on Newegg and can be found for around $105 on Amazon as well. This is still a high cost for many considering a small build and enters the premium price range for an enclosure, but remember the Q33 features an aluminum construction which typically carries a considerably higher cost than steel and plastic. Of course if the case is frustrating to use or has poor thermals than the materials used are meaningless, so in this review we’ll look at the build process and thermal results with the Q33 to see if it’s a good value. My initial impression is that the price is actually low, but that’s coming from someone who looks at a lot of cases and develops a familiarity with the average retail prices in each category.

Continue reading our review of the Lian Li PC-Q33 SFF Chassis!!