Subject: General Tech, Motherboards | June 5, 2012 - 08:04 PM | Tim Verry
Tagged: thunderbolt, motherboard, gigabyte, ga-z77x-up5 th, computex
Intel’s 10Gbps copper-based Thunderbolt technology is big at this year’s Computex show, and Gigabyte was not shy about showing off their Thunderbolt hardware. Not to be outdone by the Intel booth, Gigabyte had on display a Thunderbolt motherboard and no less than 13 pieces of Thunderbolt hardware!
The motherboard in question is Gigabyte’s GA-Z77X-UP5 TH which is an ATX form factor board that supports Intel Ivy Bridge processors, dual UEFI BIOS technology, SLI and CrossFireX multi-GPU setups, four DDR3 DIMM slots, six SATA 6Gbps ports, three PCI-E 3.0 x1 slots, three PCI-E 3.0 x16 slots, and a single legacy PCI slot. It also, of course, features a Thunderbolt port.
The list of Thunderbolt-enabled peripherals was impressive – they only seemed to be missing Thunderbolt docks. The full list of devices is available in the table below, but Gigabyte had the Apple Thunderbolt display, several Thunderbolt external hard drives, a Thunderbolt SSD, Thunderbolt-equipped RAIDed NAS boxes from several vendors, and the active Thunderbolt cables themselves (from Sumitomo Electric).
|Blackmagic design||UltraStudio 3D||Video editing|
|Blackmagic design||Intensity Extreme||Video editing|
|LaCie||eSATA Hub Thunderbolt||Hub|
|Promise Technology, Inc||Pegasus R6||Storage|
|Seagate||GoFlex ThunderBolt Adapter||HDD Adapter|
|Seagate||GoFlex Desk ThunderBolt Adapter||HDD Adapter|
|Sonnos||Sonnet ECHO ExpressCard||ExpressCard|
|Sumitomo Electric||Thunderbolt Cable||Cable|
|Western Digital||My Book Thunderbolt Drive||Storage|
Although Thunderbolt is going to be a niche connection (mostly due to expense of cables and components vs the “good enough” and much cheaper USB 3.0 standard) for the foreseeable future, Computex 2012 is trying its best to drive home the idea that Thunderbolt is not going away. There are definitely more Thunderbolt devices than I had originally predicted to show up at the show in Taipei.
Subject: Motherboards | June 5, 2012 - 06:40 PM | Tim Verry
Tagged: trinity, msi, htpc, fm2, computex, amd
Located at Booth L0810 in Nangang Hall 4F, MSI is showing off a tong of new hardware. One of the interesting displays is a wall of new motherboards based on AMD’s desktop Trinity APUs. Using the company’s Hybrid Digital Power design, the FM2 socket-based motherboards come in three sizes: EATX, ATX, and mini-ITX to meet various project needs.
MSI's Trinity display at Computex 2012. Source: MSI
The smallest of the bunch is the MSI A85IA-E53 motherboard, which is designed for HTPC use. Based on AMD’s A75 chipset, the mini-ITX board features an AMD FM2 socket in the middle, with two DDR3 DIMM slots (a maximum of 16GB of memory) below, a single PCI-E 2.0 x16 slot to the left, and four SATA 6Gbps ports to the right of the FM2 socket.
Rear IO on the board includes a combo PS/2 port, optical audio (TOSLink) output, VGA and HDMI video outputs, three eSATA ports, two USB 3.0 ports, two USB 2.0 ports, a Gigabit LAN port, and analog audio out via three 3.5mm jacks. The motherboard also features integrated WiFi and Bluetooth radios. Built with the company’s military class III components, the A85IA-E53 comes packed with the ClickBIOS II, OC Genie II, and support for HD7000 series graphics cards.
MSI has two mid-sized ATX form factor motherboards with the the MSI A55M-P33 (F2) and MSI A85MA-35. The former is intended for traditional desktop use cases while the latter is rather shallow in depth and is meant to be used in living room HTPCs.
MSI A55M-P33 (F2)
The MSI A55M-P33 (F2) is the company’s budget desktop motherboard. It supports OC Genie II and ClickBIOS II technologies as well as AMD Dual Graphics which allows the pairing of a Trinity APU integrated graphics card and discrete AMD GPU. In adition to the FM2 socket, the board features two DDR3 DIMM slots (maximum of 16GB of 1866MHz memory), four SATA 3Gbps ports, one PCI-E 2.0 x16 slot, one PCI-E 2.0 x1 slot, and one legacy PCI slot.
This motherboard is actually based on the AMD A55 chipset which explains the lack of 6Gbps ports and USB 3.0 support. The company describes the board as the “value choice” for those upgrading to a new Trinity-based system. Rear IO on the A55M-P33 (F2) includes eight USB 2.0 ports, six 3.5mm jacks for analog audio output, Gigabit Ethernet, and DVI and VGA display outputs.
The second ATX motherboard is the MSI A85MA-E35. This motherboard has been designed wider and shallower than traditional desktop ATX boards so that it can fit into slim HTPC cases (that usually have more room longways than height-wise as they need to be able to fit into AV racks and other short spaces). It is essentially the mATX A85IA-E53’s big brother as it takes the AMD A75 chipset and takes advantage of the larger PCB area to add additional functionality. The motherboard features MSI’s OC Genie II and ClickBIOS II technology and AMD’s Dual Graphics support for pairing a dedicated GPU with the Trinity APU’s graphics portion.
The board is rather spaced out as the PCB is stretched out to keep things as shallow as possible. It does feature two DDR3 DIMM slots (maximum of 16GB 1866MHz RAM), the AMD FM2 processor socket, one PCI-E 2.0 x16 slot, two PCI-E 2.0 x1 slots, and one legacy PCI slot. The only motheboard component with a heatsink attached is the southbridge, which is powering six SATA ports, at least four of which are 6Gbps (MSI only lists four 6Gbps ports in the documentation, seen above and to the right of the board [TechPowerUp indicates that all six are 6Gbps, however]). Rear IO includes four USB 3.0 ports, six analog audio out jacks, Gigabit LAN, and what is likely a PS/2 port and optical audio output.
Finally, the FM2 motherboard to rule them all (or at least the company’s AMD lineup) is the MSI A85XA-G65. The board comes packed with MSI technology including Military Class III components, OC Genie II, ClickBIOS II, Hybrid Design Power, THX TruStuio Pro, AMD Dual Graphics (APU+discrete card), AMD CrossFire, NVIDIA SLI, and AMD Eyefinity.
In other words, MSI has bolted just about everything it could to this board. They confidently labeled the motherboard as the board for enthusiasts to use to push Trinity overclocks as far as possible. The first thing I noticed about the image (seen below) of the A85XA-G65 was the massive heatsinks on the VRMs and southbridge – did I mention they were huge? In addition to the well-cooled VRMs, the motherboard features four DDR3 DIMM slots (max of 32GB 1866MHz RAM), two PCI-E 2.0 x16 slots, three PCI-E 2.0 x1 slots, and two legacy PCI slots towards the bottom of the board. To the right is the southbridge (with relatively large heatsink) powering eight SATA 6Gbps ports.
The A85XA-G65 supports DisplayPort, DVI, HDMI, and VGA video outputs. Beyond that, rear IO includes a combo PS/2 port, four USB 2.0 ports, two USB 3.0 ports, Gigabit LAN, six 3.5mm jacks for multi-channel analog audio outputs, and an optical audio output. If you want to push desktop Trinity to the max, this board definitely seems like a good place to start.
MSI has definitely come out in full force with a slew of AMD Trinity motherboards. The HTPC ones, and the mini-ITX one in particular, interest me. The beastly A85XA-G65 is also pretty neat for overclocking potential. Stay tuned to PC Perspective for more Computex 2012 coverage! What do you guys want to see from the show? You can see a few more photos after the break.
Introduction and Features
Courtesy of ASUS
ASUS continues to optimize their hardware for the overclocking and PC gaming crowds, but they are also catering to a niche audience looking for ultra stable and durable PC components. ASUS's Sabertooth X79 motherboard is their one of their latest products to bear the TUF series label and sport customized hardware and thermal components as well as a desert camo color scheme to complete the military look. This $329 motherboard comes with a five-year warranty, digital power management system, rugged chokes, solid capacitors, and MOSFETs that have been certified through third party, military-grade testing.
Courtesy of ASUS
The Sabertooth X79 also comes with a host of other features to improve SSD caching and give users quad GPU support for CrossfireX and SLI graphics card configurations. This board also includes a unique UEFI BIOS and natively supports 2TB hard drives with 64-bit operating systems. The USB BIOS "Flashback" feature also helps new users update their motherboard BIOS without entering the BIOS. ASUS states that users can use any USB storage device with the latest BIOS, push the BIOS button located on the back I/O panel for three seconds, and the board will automatically update the BIOS using standby power. Very cool!
Courtesy of ASUS
The back I/O panel on the Sabertooth X79 is no slouch either as it gives users a healthy amount of USB 2.0, USB 3.0, and eSATA 6GB/s ports for greater performance and expandability options. They also added a small fan over the back I/O panel as part of their "TUF Thermal Armor" feature that will help cool and exhaust heat from ther motherboard out the back of the chassis. Let's move on to the rest of the Saberbooth X79's features where we will get our first out-of-the-box look at this motherboard.
Subject: Motherboards, Shows and Expos | June 5, 2012 - 01:06 AM | Jeremy Hellstrom
Tagged: Z77, x79, trinity, sandy bridge-e, PLX PEX 8747, Ivy Bridge, Intel, fm2, asrock, amd
Four new Intel motherboards from ASRock were revealed at Computex, the X79 Extreme11, Z77 Extreme9 and Z77 OC Formula. All use their new XFast 555 Technology software for XFast RAM, XFast LAN and XFast USB which should at the very least allow you great control over all the frequencies on your motherboard.
The motherboard for power users supports Sandy Bridge E processors, the X79 Extreme11 sports PLX PEX 8747 bridges which means this motherboard can run multi-GPU 4-Way SLI/CrossFireX at PCIe Gen3 x16/x16/x16/x16 and puts EVGA's Classified SR-2 in serious trouble on the Leaderboard when released. 24 + 2 Power Phase Design, onboard Creative Sound Core3D and an LSI SAS2308 chip which gives you ten SATA3 connectors with 8 of the able to be set to SAS mode.
The Z77 Extreme9 also sports the PLX PEX 8747 bridge which allows a surprising full PCIe Gen3 x8/x8/x8/x8 quad GPU mode. The included T2R Dual Band WiFi 802.11 a/b/g/n + BT v4.0 Module supports dual band WiFi and BlueTooth and combines with the Wi-SB BOX to provide better signal and an extra pair of USB 3.0 connectors.
The Z77 OC Formula wants to step on ASUS' toes; while the score is impressive, the overclocks need a little work. They don't say much about this board but from the preliminary testing it looks like great fun for the serious overclocker.
Last but not least is the Z77 Extreme6/TB4 which features four channel Thunderbolt, for that you can read two Thunderbolt ports. ASRock mentions that this "allows one port to be connected to the onboard graphics and the other one can be used for discrete graphics card." which could lead to all sorts of speculation.
On the AMD side we have the ATX FM2A75 Pro4, and microATX FM2A75 Pro4-M and FM2A75M-DG which support Trinity processors but unfortunately we don't have much more than their names. TechPowerUp did get some pictures of the boards recently.
They are also showing the EN2C602-4L, E3C204-V, E3C204-4L and H77WS-DL server boards which come with a full suite of software to ensure an easy setup, an IPC motherboard for those small purpose-built applications and an intriguing HTPC box called the ASRock VisionX Series. This is reputed to featuring Ivy Bridge, Radeon HD 7850M graphics and AMD HD3D Technology with dual band WiFi but might cost a bit more than the alternative, the ASRock MINI Series which has and AMD E2-1800 backed up by a Radeon HD7340.
Subject: Motherboards, Displays | June 4, 2012 - 09:30 PM | Ryan Shrout
Tagged: Z77, thunderboltex, thunderbolt, h77, computex, asus
Ever since we posted our series of videos with ASUS on the new Z77 chipset and the features ASUS was introducing on their P8Z77 lineup, we have had countless questions about the Thunderbolt header, the implementation and finally the required add-on card to enable it. Well thankfully at Computex this week ASUS is revealing the product that users of the P8Z77 motherboards will need to enable the Thunderbolt connection, the ASUS ThunderboltEX.
Even though we have already had some hands-on time with the new ASUS P8Z77-V Premium motherboard that integrates a Thunderbolt header on the board directly, the rest of the P8Z77-V line has a 9-pin header labeled "TB_header" that will allow users to purchase the ThunderboltEX card and enable the technology in their system. ASUS was the only company to really plan ahead for Thunderbolt technology across the entire series of Z77 motherboards and as such should enjoy the feature benefits of TB for some time.
The ThunderboltEX will plug into the bottom PCIe slot using up the x4 connection and will be required to use a header cable to connect to the TB_header shown above. This header serves a dual purpose - it allows the integrated graphics of the Ivy Bridge (and even discrete graphics) to pass through to the ThunderboltEX card and then out to either a Thunderbolt enabled display or a DisplayPort monitor in a daisy chain of devices. It also allows ASUS to make sure this card is ONLY used on their own lineup of motherboards - sorry, you won't be able to buy the ASUS ThunderboltEX and use it on your Gigabyte or MSI or even your non "TB_header" ASUS motherboard.
You will also have to install an included full-size DisplayPort cable from the output on the Z77 motherboard back panel to the full-size DP input on the ThunderboltEX itself. This allows the pass through of all the video data.
Once everything is configured, users will have a full speed 10 Gbps ready Thunderbolt connection to use with external storage, break out boxes and other accessories coming down the pipeline rapidly. ASUS claims this implementation will still support 6 daisy-chained devices with a seventh device as either a Thunderbolt or mini-DisplayPort monitor. Even better, hot plug support will still be enabled!
ASUS stands committed to the belief that motherboard design is not just about pure spec but ensuring a quality design and overall implementation. This is achieved through many means such as sensible layout, flexible I/O connectivity and robust control over parameters of operation. In addition foresight in design can play an important role. ASUS recently launched the world’s first certified native Thunderbolt motherboard with the P8Z77-V Premium. While the Premium leads the industry in respect to connectivity and overall functionality it carries a flagship price for its premium feature set. ASUS had kept this in mind along with thinking about how to best support the advanced new interconnect that is Thunderbolt. With this in mind ASUS is proud to unveil its exclusive Thunderbolt upgrade solution for its line of Z77 and H77 motherboards. The ThunderboltEX card is the first add-on card on the market enabling an easy way to upgrade ASUS motherboards with the latest I/O. This is proof in having foresight in design as compatible boards had to have a special TB header in place to support this upgrade.
Currently, the ThunderboltEX is awaiting Thunderbolt device certification and ASUS will obviously announce when that occurs.
Obviously this implementation of Thunderbolt is not as elegant as the one you will find on the ASUS Premium Z77 motherboard or the MSI Z77A-GD80, but it does enable other ASUS Z77 motherboard users to add the feature to their systems without REQUIRING to the cost up front to everyone. It does remind me a little bit of the first days of ATI CrossFire but I think most of you would agree that this solution is better than forcing users to buy a $450 motherboard.
I don't have any information on pricing or availability but you can be sure as soon as our questions are answered by ASUS we will update this post!
If you are looking for more information on Thunderbolt devices and performance, check out our stream of posts on the subject and take a look at the Thunderbolt / ASUS video below!
Subject: Motherboards, Shows and Expos | June 4, 2012 - 06:46 PM | Jeremy Hellstrom
Tagged: ultra durable 5, IR3550 PowIRstage, International Rectifier, gigabyte, computex 2012, computex
City of Industry, California, June 4th , 2012– GIGABYTE TECHNOLGY Co. Ltd., a leading manufacturer of motherboards and graphics cards, today introduced their latest Ultra Durable 5 technology, featuring a range of high current capable components including the industry’s highest rated 60A IR3550 PowIRstage ICs that provide the best quality power delivery to the CPU for record-breaking performance, cool and efficient operation and extended motherboard lifespan.
GIGABYTE is yet again raising the bar of motherboard quality and durability with their Ultra Durable 5 technology, which includes high current capable components for the CPU power zone including the highest rated and awarded IR3550 PowIRstage ICs from International Rectifier, 2X Copper PCB and high current Ferrite Core Chokes rated up to 60A which together are able to deliver up to 60°C* cooler temperatures than traditional motherboards. Featured on a range of new motherboards based the Intel X79 and Z77 Express Chipsets, GIGABYTE Ultra Durable 5 technology is the next evolution in quality motherboard design.
“As the exclusive motherboard manufacturer to utilize the amazingly efficient IR3550 PowIRstage ICs from International Rectifier, GIGABYTE has spent a considerable amount of engineering resources to ensure our Ultra Durable 5 motherboards are our best Ultra Durable motherboards yet,” commented Henry Kao, Vice President of GIGABYTE Motherboard Business Unit. “GIGABYTE Ultra Durable 5 motherboards are especially optimized for water cooled systems and overclocked Intel Core i7-3770K Ivy Bridge “K” SKU CPUs due to their exceptionally low operating temperatures, and make the perfect match for anyone looking to push their system to limits.”
“We are delighted that IR’s award winning IR3550 PowIRstage provides the high current, thermal capability and outstanding performance to power GIGABYTE’s new Ultra Durable 5 motherboard series,” said Deepak Savadatti, Vice President and General Manager, IR’s Enterprise Power Business Unit.
Subject: Motherboards, Shows and Expos | June 4, 2012 - 04:14 PM | Ryan Shrout
Tagged: computex, gigabyte, Z77, thunderbolt, Z77X-UP5 TH
Anandtech has the scoop on a new motherboard being shown at Computex this week from Gigabyte that features not just Thunderbolt support, not just a single Thunderbolt port but DUAL Thunderbolt connections. The Z77X-UP5 TH is the first such PC platform to offer support for four channels of the new connectivity technology.
Image source: Anandtech.com
Both ports can run at the full 10 Gbps speeds thanks to the inclusion of a PLX PCI Express bridge chip so bandwidth restrictions shouldn't be a concern. We don't know the pricing or availability of this new board quite yet but Gigabyte is finally jumping into the world of Thunderbolt after the MSI and ASUS announcements last month.
Hit up the Anandtech link above for more photos of this board!
Subject: Motherboards | June 1, 2012 - 10:06 PM | Tim Verry
Tagged: trinity, motherboard, fm2, ECS, desktop, a85f2-a
Taiwan-based motherboard maker ECS (Elitegroup Computer Systems) recently announced an ATX form factor motherboard based on the AMD A85X chipset. The most exciting feature is that this motherboard uses the AMD FM2 CPU socket, and it is ready to accept desktop Trinity processors!
The A85F2-A Deluxe motherboard comes equipped with two PCI-E 2.0 x16 slots for CrossfireX mutli-GPU setups, three PCI-E 2.0 x1 slots, and two legacy PCI slots. With four DDR3 DIMM slots, the board can support up to 64GB of memory. It further supports memory up to 2300MHz (officially). It also features seven 6Gb/s SATA ports with RAID 0, 1, 5, and 10 support.
External expansion (rear IO) includes six USB 3.0 ports, eight USB 2.0 ports, Gigabit LAN, and an eSATA connector. The A85F2-A Deluxe also features HDMI, DVI, and VGA video outputs as well as 8 channel analog audio.
On the software side of things, the motherboard has GUI uEFI BIOS, ECS MIB X, and support for multiple languages. The FM2 socket based motherboard also comes bundled with Norton AntiVirus, Muzee, Cyberlink Media Suite, and ECS iEZ (which is the driver and BIOS update (and fan control) utility.
The board has undergone numerous in-house tests (though be sure to also check out independent reviews), and has been rated ECS Nonstop Certified. The company also includes gold plated contacts and solid capacitors with the motherboard. It has also been rated for ESD protection on the VGA, USB, LAN, and HDMI ports.
The Trinity processor is the best part about the motherboard, however as it enables several new technologies including up to four displays, AMD Turbo Core 3, Open CL 1.1, and hardware video decoding with AMD’s UVD engine.
In addition to the A85F2-A Deluxe, ECS will also be releasing four other FM2 socket based motherboards including the A75F2-A2, A75F2-M2, A55F2-A2, and A55F2-M3. Unfortunately, there is no word yet on pricing or availability. Expect to see more details on these boards soon (possibly at Computex 2012?).
Subject: General Tech, Motherboards | June 1, 2012 - 01:17 PM | Jeremy Hellstrom
Tagged: asus, maximus v gene, p8z77-V deluxe, overclocking, smackdown
Earlier this week, we and several other sites reported that a Gigabyte Z77X-UD3H motherboard managed to take the Ivy Bridge i7-3770 with a single core enabled all the way to 7.03GHz and ASUS would like to know what all the fuss is about. It seems that on January the 5th, ASUS took the i7-3770 to 7.06GHz on a P8Z77-V Deluxe which not only beats Gigabyte's overclock but did so long enough ago we needed to be reminded of it.
That was not even the best overclock that ASUS managed, the tiny Maximus V Gene could support a speed of 7.07GHz. That speed was hit yesterday by Andre Yang and seems to demonstrate that for extreme overclockers it is ASUS' Z77 boards which you should be counting on.
Hopefully this little correction will start an overclocking war between the two manufacturers, as both host events for overclockers as does MSI who have not chimed in to this contest yet. LN cooling is not for the faint of heart but it is what you need to practice in order to compete at this level. Gigabyte does seem to have one record which does still stand, DDR3-3280 MHz is quite spectacular.
ASUS master overclocker Andre Yang has managed another benchmarking world record, once more using the Intel Z77-based ROG Maximus V GENE mATX. Utilizing a quad-core/eight threaded Intel i7-3770 Ivy Bridge processor, Andre was able to overclock the CPU to an impressive milestone frequency of 7074.7MHz, again breaking the fabled 7GHz processor threshold and overtaking the previous record of 7.06GHz ( which was previously set and held by ASUS with the P8Z77-V Deluxe ). The CPU multiplier and BCLK were set to 112.69 x 63. The Maximus V GENE had 4GB of G.Skill DDR3 RAM, clocked to 1197.8MHz. The graphics card used was an ASUS GeForce GTX 680, set to 705MHz/3004MHz. Keep in mind quad-core and eight-threaded overclocking presents a much tougher challenge than more traditional single-core and double-threaded tuning in terms of stability and consistency, making the feat even more impressive.
Subject: Motherboards | May 30, 2012 - 04:12 PM | Tim Verry
Tagged: motherboard, gigabyte, Ivy Bridge, Gigabyte Z77X-UD3H
Who doesn’t love some good ‘ole fashioned overclocking? Professional overclocker HiCookie employed liquid nitrogen cooling to push an Intel Ivy Bridge Core i7 3770K processor to 7.03 GHz, breaking the previous world record. In addition, he managed to push four DIMMs of G.Skill Trident X DDR3 memory to an amazing 3.28 GHz!
Popular motherboard manufacturer Gigabyte announced today that its motherboards have been used to shatter the previous Ivy Bridge CPU and DDR3 RAM world records. Using liquid nitrogen and a Gigabyte Z77X-UD3H motherboard, the overclocker pushed the i7 3770K to 7.03 GHz. The overclock is only running on a single core (two threads), but it does show that at least some Ivy Bridge processors are capable of high overclocks despite the issues some CPUs are having. The CPUz validation and HWBot submission are available here: CPUz, HWBot.
The Z77-UD3H motherboard used to take Ivy Bridge to 7.03 GHz.
As far as memory overclocking, the company used it’s GA-Z77X-UD5H motherboard and four G.Skill Trident X DDR3 DIMMs rated for 2800 MHz to achieve 3,280 MHz speeds under heavy overclocking. Gigabyte claims that the feat was due in part to their memory tuning capabilities and motherboard engineering. It seems crazy to think that only a few years ago, people were running 800 MHz memory–and this overclocked RAM is currently running faster than my i7 860 processor!
Deputy Director of Motherboard Marketing Tim Handley stated in the press release that "these new world records highlight our belief that top notch quality and design deliver truly world-class, record breaking performance.” They also hinted that a new series of motherboards that will be released at Computex 2012 are showing even better overclocking abilities.
It will be interesting to see how long it takes for Gigabyte’s new world record to be broken. I hope that whoever does break it manages to do it with more than one core as well. The full press release is available here.
Get notified when we go live!