Subject: Motherboards | March 29, 2005 - 01:39 PM | Ryan Shrout
HardOCP has reviewed the Epox 9NPA+ motherboard based on the nForce4 Ultra chipset. I actually had a review of this board ready for print this morning, and it should go live tomorrow some time.
However, there was one strange thing I encountered with the 9NPA+ ULTRA — its lack of overclocking ability. In testing the board, I only was able to get it to a 250MHz FSB and at that speed, the board wasn't as stable as I would've liked.
Subject: Motherboards | March 29, 2005 - 01:30 PM | Ryan Shrout
The Tech Report has reviewed a Gigabyte VIA K8T890 motherboard with PCI Express support for under $90.
Despite the fact that GA-K8VT890-9 offers a fair bit of value at its bargain-basement price point, enthusiasts will no doubt be frustrated by the BIOS's lack of a PCI Express clock lock and temperature-driven fan speed control. Those features could perhaps be added in a BIOS update, as Gigabyte has done with more extensive memory timings, but they're not available yet.
Subject: Motherboards | March 25, 2005 - 10:32 PM | Ryan Shrout
Epox sent over a PR release on their upcoming nForce4 SLI Intel Edition motherboard. You can see the image below, or see all the specs that I posted in our forums to avoid the long post here.
Subject: Motherboards | March 25, 2005 - 10:04 PM | Ryan Shrout
Viperlair has reviewed the Winfast NF4 Ultra motherboard from PC manufacturering giant, Foxxcon.
This board is priced significantly cheaper however than many other nForce 4 boards, somewhere in the region of $103 US as compared to many boards with SLI that cost at least $60 more.
Subject: Motherboards | March 23, 2005 - 07:59 PM | Ryan Shrout
I guess Abit sent out quite a lot of these boards, eh? Here' is yet another Fatal1ty AN8 Motherboard reviewed.
The rundown of the Fatal1ty's performance and overclocking potential is definitely exceptional. While the board lacks great VDIMM options, the BIOS allows other great voltage ranges and many memory adjustments. I'm pretty sure that most of you are interested in the comparison against DFI's Ultra-D, and our review of that motherboard will arrive soon.
Subject: Motherboards | March 23, 2005 - 07:56 PM | Ryan Shrout
All in all, ABIT Fatal1ty AN8 mainboard makde a very good impression.
Subject: Motherboards | March 23, 2005 - 12:21 PM | Ryan Shrout
Gamer's Depot has put up an article comparing four SLI motherboards today. They look at options from Asus, MSI, Gigabyte and DFI. You can also check out my reviews by looking in our motherboard section.
We firmly believe that the importance of SLI has been properly communicated amongst many gamers and certainly ATI — I guess it's easy to talk-down a technology you don't have out on the market eh?
Subject: Motherboards | March 21, 2005 - 11:59 PM | Ryan Shrout
The DFI NF4 Ultra has been getting a lot of play recently, this time in the overclocking arena.
The DFI will run very stable at 300 x 8 using TCCD 512x2 @1T, achieving 300 x 9 with simple air-cooling credits to how well the BIOS, memory controller and the quality of this board to work in concert with each other. This board is simply splendid in reaching the best possible performance.
Subject: Motherboards | March 18, 2005 - 07:07 PM | Ryan Shrout
DFI really set the stage for tweakers and overclockers with this board and are now reaping the benefits of its hard work and research. As of today (March 18), fifteen of the top twenty systems in the 3DMark05 hall of fame use DFI SLI systems!
Subject: Motherboards | March 17, 2005 - 02:53 PM | Ryan Shrout
Geoff (that's pronounced "Jeff" for us Americans) of The Tech Report has posted his review of the Abit Fatal1ty AN8 motherboard today. In case you also want to read what I had to say about it, you can read my review as well.
In addition to OTES exhaust coolers, Abit also bundles an OTES RAMFlow memory cooler with the board.