Subject: Motherboards | June 6, 2012 - 08:12 PM | Tim Verry
Tagged: zeus, wolverine, power phase, motherboard, dual gpu, concept, computex, asus
ASUS has a history of showing off crazy high-end concept motherboards that are not likely to come to market but may help influence future motherboard products by getting the creative sparks of innovation flowing in engineers’ minds.
At this year’s Computex 2012, Asus showed off two concept motherboards that it is calling Zeus and Wolverine. While Zeus tackles Thunderbolt and integrated GPUs, Wolverine approaches the problem of getting clean power to the CPU by pushing the limits of the number of power phases that can be integrated into ATX-sized motherboards.
You will notice on the Zeus motherboard that the bottom of the board holds a bank of two 8 pin and two six pin power connectors. The two eight pin connectors are labeled VGA 1 and VGA 2 while the two six pin connectors are labeled VGA 3 and VGA 4 respectively. At first this seems like a regular X79 chipset (socket 2011) based motherboard with giant heatsinks for overclockers. After doing a double take (at least I did), you will notice that the board has no PCI-E connectors!
Instead, the board has a large heatsink, and under that heatsink are two GPUs in CrossFire configuration. Tech Power Up believes that the GPUs being used are two AMD 7800 “Pitcairn” series mobile graphics cards in CrossFire configuration. While the desktop variants are fairly low power, they would need active cooling or a larger heatsink, which I think is what lead them to consider that ASUS may be using mobile-class cards. Reportedly, ASUS did not create this board to suggest GPU integration, but to show off dual Thunderbolt ports on an X79 motherboard.
Connectivity on the board includes a socket 2011 CPU, eight DDR3 DIMM slots, ten SATA connectors, (and on the rear IO panel) a WiFi radio, eight USB 3.0 ports, two Thunderbolt ports, Gigabit LAN, 7.1 channel analog audio output, optical audio output, HDMI output, DisplayPort output, and two eSATA ports.
As far as the dual GPU integration goes, however... I don’t expect we’ll be seeing a move in the industry like this any time soon, at least not on high-end Enthusiast boards (though I could see an argument for small form factor (SFF) budget gaming systems from OEMs). Dedicated graphics card technology moves at such a rapid pace compared to motherboards that it is just not feasible to market a feature like this to enthusiasts. While they may keep the same motherboard for years, those same users will likely upgrade their graphics cards at least once to stay current. Further, with the cost of these high-end motherboards already approaching exorbitant, adding integrated GPUs that don’t mesh well with the purpose of a high end system pushes the cost higher and demand to a point that these boards just don’t seem realistic.
While Zeus was more of a powerhouse with a twist (albeit one that isn’t really feasible to market), the other motherboard – Wolverine – is a “because we can” board but one that could have an impact on the industry today. ASUS has taken its Digi+ digital power to the extreme by packing as many power phases as it could into an ATX form factor motherboard. In total, they managed to place 40 power phases onto the PCB – notice how the CPU socket had to be shifted to the right to make room!
Other features on the board include eight SATA connectors, four DIMM slots, three PCI-E 3.0 x16 slots, LGA 1155 socket, and three PCI 3.0 x1 slots. On the rear the board features four USB 2.0 ports, six USB 3.0 ports, a WiFi radio, Gigabit LAN, BIOS buttons, optical audio output, 7.1 channel analog audio output, and what looks like two eSATA ports.
Granted, I’m not suggesting that we will be seeing motherboards coming out with 40+ power phases anytime soon. I can see this influencing future designs, however. Even heavy overclockers (water and air cooling levels) don’t really /need/ 40 power phases but we could start seeing vendors put out boards with half of that and still have it be a big improvement.
What do you think of the two new ASUS concept motherboards? You can see more images of the boards over at AnandTech's gallery. Do you think they are on the right track? If not what areas do you think motherboard manufacturers need to improve?
Subject: Motherboards | June 6, 2012 - 06:04 PM | Tim Verry
Tagged: Z77, msi, motherboard, mini-itx, Intel, htpc, computex
MSI is showing off a lot of motherboards at Computex 2012. One in particular that stuck out to me was a mini ITX motherboard that sported Ivy Bridge compatibility, four SATA ports (2 which are SATA 6Gbps), and PCI-E 3.0 compliant making it perfect for an high performance HTPC build. The motherboard in question is the MSI Z77IA-E53 and as the name suggests it is based around Intel’s Z77 chipset.
The mini-ITX form factor motherboard sports MSI’s ClickBIOS II UEFI BIOS and its OC Genie II technology as well as THX TruStudio Pro audio. Other features include an LGA 1155 socket for Ivy Bridge or Sandy Bridge (Core i7, i5, i3, Pentium or Celeron) processors, two DDR3 DIMM slots (up to 16GB of 2800MHz), and a single PCI-E 3.0 x16 slot at the very bottom of the motherboard.
On the back of the board, the Z77IA-E53 features HDMI and VGA video outputs, two USB 3.0 ports, four USB 2.0 ports, an eSATA port, Gigabit LAN, PS/2 port, optical audio outpu, three 3.5mm jacks for analog audio output, and WiFi and Bluetooth radios.
Unfortunately, there is no word yet on pricing or availability.
Subject: Motherboards | June 5, 2012 - 08:40 PM | Tim Verry
Tagged: X79S-UP5 WiFi, x79, socket 2011, Intel, gigabyte, computex
Although Ivy Bridge is the new hotness, socket 2011 is still the company’s top-end enthusiast and workstation platform. And to to be forgotten, Gigabyte dedicated some space at its Computex booth to show off a new high-end X79 socket 2011 motherboard. The Gigabyte GA-X79S-UP5 WiFi is a EATX motherboard with a 2011 socket that is surrounded by heatpipes and VRM heatsinks (we recently reviewed the X79-UD5) The board further supports eight DDR3 DIMM slots, eight SAS connectors, six SATA ports, four PCI-E 3.0 x16 slots (up to 3 way SLI/CrossFireX), one PCI-E 3.0 x1 slot, and one legacy PCI slot at the bottom of the motherboard. It also has internal connectors for front panel audio, SPDIF, Firewire (1394), TPM, one USB 3.0, two USB 2.0 headers, and four fan headers (one of which is for the CPU).
Integrated Gigabyte technology includes the company’s all-digital and “3D Power,” dual UEFI BIOSes, 8 phase VRM, Gigabyte Bluetooth 4.0 and WiFi card, 110dB SNR (signal-to-noise ration) HD audio, and 3X USB power and On/Off Charge to charge iPads and tablets even when the computer is powered down. Quad channel memory and socket 2011 processors give CAD engineers, video editors, and other 3D modelers the most performance possible out of a single socket workstation system.
Rear IO for the X79S-UP5 WiFi board includes a PS/2 port, four USB 2.0 ports, a firewire port, UEFI BIOS reset and overclock profile buttons, four USB 3.0 ports, two eSATA ports, a USB/eSATA combo port, Gigabit LAN, optical audio output, and five analog audio outputs.
In short, this is a motherboard that Gigabyte has packed to the brim with features for enthusiasts. Below you will find several high-resolution images of the new socket 2011 motherboard. If your internet connection is ready, dive right in!
Gigabyte GA-X79S-UP5 WiFi Motherboard Images
Even considering my bias of my favorite color being blue, the board looks really nice, especially the heatsink designs which really make the board stand out.
CPU socket area:
Here we can see the 2011 socket, VRMs, and DDR3 DIMM slots.
More photos after the break!
Subject: General Tech, Motherboards | June 5, 2012 - 08:04 PM | Tim Verry
Tagged: thunderbolt, motherboard, gigabyte, ga-z77x-up5 th, computex
Intel’s 10Gbps copper-based Thunderbolt technology is big at this year’s Computex show, and Gigabyte was not shy about showing off their Thunderbolt hardware. Not to be outdone by the Intel booth, Gigabyte had on display a Thunderbolt motherboard and no less than 13 pieces of Thunderbolt hardware!
The motherboard in question is Gigabyte’s GA-Z77X-UP5 TH which is an ATX form factor board that supports Intel Ivy Bridge processors, dual UEFI BIOS technology, SLI and CrossFireX multi-GPU setups, four DDR3 DIMM slots, six SATA 6Gbps ports, three PCI-E 3.0 x1 slots, three PCI-E 3.0 x16 slots, and a single legacy PCI slot. It also, of course, features a Thunderbolt port.
The list of Thunderbolt-enabled peripherals was impressive – they only seemed to be missing Thunderbolt docks. The full list of devices is available in the table below, but Gigabyte had the Apple Thunderbolt display, several Thunderbolt external hard drives, a Thunderbolt SSD, Thunderbolt-equipped RAIDed NAS boxes from several vendors, and the active Thunderbolt cables themselves (from Sumitomo Electric).
|Blackmagic design||UltraStudio 3D||Video editing|
|Blackmagic design||Intensity Extreme||Video editing|
|LaCie||eSATA Hub Thunderbolt||Hub|
|Promise Technology, Inc||Pegasus R6||Storage|
|Seagate||GoFlex ThunderBolt Adapter||HDD Adapter|
|Seagate||GoFlex Desk ThunderBolt Adapter||HDD Adapter|
|Sonnos||Sonnet ECHO ExpressCard||ExpressCard|
|Sumitomo Electric||Thunderbolt Cable||Cable|
|Western Digital||My Book Thunderbolt Drive||Storage|
Although Thunderbolt is going to be a niche connection (mostly due to expense of cables and components vs the “good enough” and much cheaper USB 3.0 standard) for the foreseeable future, Computex 2012 is trying its best to drive home the idea that Thunderbolt is not going away. There are definitely more Thunderbolt devices than I had originally predicted to show up at the show in Taipei.
Subject: Motherboards | June 5, 2012 - 06:40 PM | Tim Verry
Tagged: trinity, msi, htpc, fm2, computex, amd
Located at Booth L0810 in Nangang Hall 4F, MSI is showing off a tong of new hardware. One of the interesting displays is a wall of new motherboards based on AMD’s desktop Trinity APUs. Using the company’s Hybrid Digital Power design, the FM2 socket-based motherboards come in three sizes: EATX, ATX, and mini-ITX to meet various project needs.
MSI's Trinity display at Computex 2012. Source: MSI
The smallest of the bunch is the MSI A85IA-E53 motherboard, which is designed for HTPC use. Based on AMD’s A75 chipset, the mini-ITX board features an AMD FM2 socket in the middle, with two DDR3 DIMM slots (a maximum of 16GB of memory) below, a single PCI-E 2.0 x16 slot to the left, and four SATA 6Gbps ports to the right of the FM2 socket.
Rear IO on the board includes a combo PS/2 port, optical audio (TOSLink) output, VGA and HDMI video outputs, three eSATA ports, two USB 3.0 ports, two USB 2.0 ports, a Gigabit LAN port, and analog audio out via three 3.5mm jacks. The motherboard also features integrated WiFi and Bluetooth radios. Built with the company’s military class III components, the A85IA-E53 comes packed with the ClickBIOS II, OC Genie II, and support for HD7000 series graphics cards.
MSI has two mid-sized ATX form factor motherboards with the the MSI A55M-P33 (F2) and MSI A85MA-35. The former is intended for traditional desktop use cases while the latter is rather shallow in depth and is meant to be used in living room HTPCs.
MSI A55M-P33 (F2)
The MSI A55M-P33 (F2) is the company’s budget desktop motherboard. It supports OC Genie II and ClickBIOS II technologies as well as AMD Dual Graphics which allows the pairing of a Trinity APU integrated graphics card and discrete AMD GPU. In adition to the FM2 socket, the board features two DDR3 DIMM slots (maximum of 16GB of 1866MHz memory), four SATA 3Gbps ports, one PCI-E 2.0 x16 slot, one PCI-E 2.0 x1 slot, and one legacy PCI slot.
This motherboard is actually based on the AMD A55 chipset which explains the lack of 6Gbps ports and USB 3.0 support. The company describes the board as the “value choice” for those upgrading to a new Trinity-based system. Rear IO on the A55M-P33 (F2) includes eight USB 2.0 ports, six 3.5mm jacks for analog audio output, Gigabit Ethernet, and DVI and VGA display outputs.
The second ATX motherboard is the MSI A85MA-E35. This motherboard has been designed wider and shallower than traditional desktop ATX boards so that it can fit into slim HTPC cases (that usually have more room longways than height-wise as they need to be able to fit into AV racks and other short spaces). It is essentially the mATX A85IA-E53’s big brother as it takes the AMD A75 chipset and takes advantage of the larger PCB area to add additional functionality. The motherboard features MSI’s OC Genie II and ClickBIOS II technology and AMD’s Dual Graphics support for pairing a dedicated GPU with the Trinity APU’s graphics portion.
The board is rather spaced out as the PCB is stretched out to keep things as shallow as possible. It does feature two DDR3 DIMM slots (maximum of 16GB 1866MHz RAM), the AMD FM2 processor socket, one PCI-E 2.0 x16 slot, two PCI-E 2.0 x1 slots, and one legacy PCI slot. The only motheboard component with a heatsink attached is the southbridge, which is powering six SATA ports, at least four of which are 6Gbps (MSI only lists four 6Gbps ports in the documentation, seen above and to the right of the board [TechPowerUp indicates that all six are 6Gbps, however]). Rear IO includes four USB 3.0 ports, six analog audio out jacks, Gigabit LAN, and what is likely a PS/2 port and optical audio output.
Finally, the FM2 motherboard to rule them all (or at least the company’s AMD lineup) is the MSI A85XA-G65. The board comes packed with MSI technology including Military Class III components, OC Genie II, ClickBIOS II, Hybrid Design Power, THX TruStuio Pro, AMD Dual Graphics (APU+discrete card), AMD CrossFire, NVIDIA SLI, and AMD Eyefinity.
In other words, MSI has bolted just about everything it could to this board. They confidently labeled the motherboard as the board for enthusiasts to use to push Trinity overclocks as far as possible. The first thing I noticed about the image (seen below) of the A85XA-G65 was the massive heatsinks on the VRMs and southbridge – did I mention they were huge? In addition to the well-cooled VRMs, the motherboard features four DDR3 DIMM slots (max of 32GB 1866MHz RAM), two PCI-E 2.0 x16 slots, three PCI-E 2.0 x1 slots, and two legacy PCI slots towards the bottom of the board. To the right is the southbridge (with relatively large heatsink) powering eight SATA 6Gbps ports.
The A85XA-G65 supports DisplayPort, DVI, HDMI, and VGA video outputs. Beyond that, rear IO includes a combo PS/2 port, four USB 2.0 ports, two USB 3.0 ports, Gigabit LAN, six 3.5mm jacks for multi-channel analog audio outputs, and an optical audio output. If you want to push desktop Trinity to the max, this board definitely seems like a good place to start.
MSI has definitely come out in full force with a slew of AMD Trinity motherboards. The HTPC ones, and the mini-ITX one in particular, interest me. The beastly A85XA-G65 is also pretty neat for overclocking potential. Stay tuned to PC Perspective for more Computex 2012 coverage! What do you guys want to see from the show? You can see a few more photos after the break.
Introduction and Features
Courtesy of ASUS
ASUS continues to optimize their hardware for the overclocking and PC gaming crowds, but they are also catering to a niche audience looking for ultra stable and durable PC components. ASUS's Sabertooth X79 motherboard is their one of their latest products to bear the TUF series label and sport customized hardware and thermal components as well as a desert camo color scheme to complete the military look. This $329 motherboard comes with a five-year warranty, digital power management system, rugged chokes, solid capacitors, and MOSFETs that have been certified through third party, military-grade testing.
Courtesy of ASUS
The Sabertooth X79 also comes with a host of other features to improve SSD caching and give users quad GPU support for CrossfireX and SLI graphics card configurations. This board also includes a unique UEFI BIOS and natively supports 2TB hard drives with 64-bit operating systems. The USB BIOS "Flashback" feature also helps new users update their motherboard BIOS without entering the BIOS. ASUS states that users can use any USB storage device with the latest BIOS, push the BIOS button located on the back I/O panel for three seconds, and the board will automatically update the BIOS using standby power. Very cool!
Courtesy of ASUS
The back I/O panel on the Sabertooth X79 is no slouch either as it gives users a healthy amount of USB 2.0, USB 3.0, and eSATA 6GB/s ports for greater performance and expandability options. They also added a small fan over the back I/O panel as part of their "TUF Thermal Armor" feature that will help cool and exhaust heat from ther motherboard out the back of the chassis. Let's move on to the rest of the Saberbooth X79's features where we will get our first out-of-the-box look at this motherboard.
Subject: Motherboards, Shows and Expos | June 5, 2012 - 01:06 AM | Jeremy Hellstrom
Tagged: Z77, x79, trinity, sandy bridge-e, PLX PEX 8747, Ivy Bridge, Intel, fm2, asrock, amd
Four new Intel motherboards from ASRock were revealed at Computex, the X79 Extreme11, Z77 Extreme9 and Z77 OC Formula. All use their new XFast 555 Technology software for XFast RAM, XFast LAN and XFast USB which should at the very least allow you great control over all the frequencies on your motherboard.
The motherboard for power users supports Sandy Bridge E processors, the X79 Extreme11 sports PLX PEX 8747 bridges which means this motherboard can run multi-GPU 4-Way SLI/CrossFireX at PCIe Gen3 x16/x16/x16/x16 and puts EVGA's Classified SR-2 in serious trouble on the Leaderboard when released. 24 + 2 Power Phase Design, onboard Creative Sound Core3D and an LSI SAS2308 chip which gives you ten SATA3 connectors with 8 of the able to be set to SAS mode.
The Z77 Extreme9 also sports the PLX PEX 8747 bridge which allows a surprising full PCIe Gen3 x8/x8/x8/x8 quad GPU mode. The included T2R Dual Band WiFi 802.11 a/b/g/n + BT v4.0 Module supports dual band WiFi and BlueTooth and combines with the Wi-SB BOX to provide better signal and an extra pair of USB 3.0 connectors.
The Z77 OC Formula wants to step on ASUS' toes; while the score is impressive, the overclocks need a little work. They don't say much about this board but from the preliminary testing it looks like great fun for the serious overclocker.
Last but not least is the Z77 Extreme6/TB4 which features four channel Thunderbolt, for that you can read two Thunderbolt ports. ASRock mentions that this "allows one port to be connected to the onboard graphics and the other one can be used for discrete graphics card." which could lead to all sorts of speculation.
On the AMD side we have the ATX FM2A75 Pro4, and microATX FM2A75 Pro4-M and FM2A75M-DG which support Trinity processors but unfortunately we don't have much more than their names. TechPowerUp did get some pictures of the boards recently.
They are also showing the EN2C602-4L, E3C204-V, E3C204-4L and H77WS-DL server boards which come with a full suite of software to ensure an easy setup, an IPC motherboard for those small purpose-built applications and an intriguing HTPC box called the ASRock VisionX Series. This is reputed to featuring Ivy Bridge, Radeon HD 7850M graphics and AMD HD3D Technology with dual band WiFi but might cost a bit more than the alternative, the ASRock MINI Series which has and AMD E2-1800 backed up by a Radeon HD7340.
Subject: Motherboards, Displays | June 4, 2012 - 09:30 PM | Ryan Shrout
Tagged: Z77, thunderboltex, thunderbolt, h77, computex, asus
Ever since we posted our series of videos with ASUS on the new Z77 chipset and the features ASUS was introducing on their P8Z77 lineup, we have had countless questions about the Thunderbolt header, the implementation and finally the required add-on card to enable it. Well thankfully at Computex this week ASUS is revealing the product that users of the P8Z77 motherboards will need to enable the Thunderbolt connection, the ASUS ThunderboltEX.
Even though we have already had some hands-on time with the new ASUS P8Z77-V Premium motherboard that integrates a Thunderbolt header on the board directly, the rest of the P8Z77-V line has a 9-pin header labeled "TB_header" that will allow users to purchase the ThunderboltEX card and enable the technology in their system. ASUS was the only company to really plan ahead for Thunderbolt technology across the entire series of Z77 motherboards and as such should enjoy the feature benefits of TB for some time.
The ThunderboltEX will plug into the bottom PCIe slot using up the x4 connection and will be required to use a header cable to connect to the TB_header shown above. This header serves a dual purpose - it allows the integrated graphics of the Ivy Bridge (and even discrete graphics) to pass through to the ThunderboltEX card and then out to either a Thunderbolt enabled display or a DisplayPort monitor in a daisy chain of devices. It also allows ASUS to make sure this card is ONLY used on their own lineup of motherboards - sorry, you won't be able to buy the ASUS ThunderboltEX and use it on your Gigabyte or MSI or even your non "TB_header" ASUS motherboard.
You will also have to install an included full-size DisplayPort cable from the output on the Z77 motherboard back panel to the full-size DP input on the ThunderboltEX itself. This allows the pass through of all the video data.
Once everything is configured, users will have a full speed 10 Gbps ready Thunderbolt connection to use with external storage, break out boxes and other accessories coming down the pipeline rapidly. ASUS claims this implementation will still support 6 daisy-chained devices with a seventh device as either a Thunderbolt or mini-DisplayPort monitor. Even better, hot plug support will still be enabled!
ASUS stands committed to the belief that motherboard design is not just about pure spec but ensuring a quality design and overall implementation. This is achieved through many means such as sensible layout, flexible I/O connectivity and robust control over parameters of operation. In addition foresight in design can play an important role. ASUS recently launched the world’s first certified native Thunderbolt motherboard with the P8Z77-V Premium. While the Premium leads the industry in respect to connectivity and overall functionality it carries a flagship price for its premium feature set. ASUS had kept this in mind along with thinking about how to best support the advanced new interconnect that is Thunderbolt. With this in mind ASUS is proud to unveil its exclusive Thunderbolt upgrade solution for its line of Z77 and H77 motherboards. The ThunderboltEX card is the first add-on card on the market enabling an easy way to upgrade ASUS motherboards with the latest I/O. This is proof in having foresight in design as compatible boards had to have a special TB header in place to support this upgrade.
Currently, the ThunderboltEX is awaiting Thunderbolt device certification and ASUS will obviously announce when that occurs.
Obviously this implementation of Thunderbolt is not as elegant as the one you will find on the ASUS Premium Z77 motherboard or the MSI Z77A-GD80, but it does enable other ASUS Z77 motherboard users to add the feature to their systems without REQUIRING to the cost up front to everyone. It does remind me a little bit of the first days of ATI CrossFire but I think most of you would agree that this solution is better than forcing users to buy a $450 motherboard.
I don't have any information on pricing or availability but you can be sure as soon as our questions are answered by ASUS we will update this post!
If you are looking for more information on Thunderbolt devices and performance, check out our stream of posts on the subject and take a look at the Thunderbolt / ASUS video below!
Subject: Motherboards, Shows and Expos | June 4, 2012 - 06:46 PM | Jeremy Hellstrom
Tagged: ultra durable 5, IR3550 PowIRstage, International Rectifier, gigabyte, computex 2012, computex
City of Industry, California, June 4th , 2012– GIGABYTE TECHNOLGY Co. Ltd., a leading manufacturer of motherboards and graphics cards, today introduced their latest Ultra Durable 5 technology, featuring a range of high current capable components including the industry’s highest rated 60A IR3550 PowIRstage ICs that provide the best quality power delivery to the CPU for record-breaking performance, cool and efficient operation and extended motherboard lifespan.
GIGABYTE is yet again raising the bar of motherboard quality and durability with their Ultra Durable 5 technology, which includes high current capable components for the CPU power zone including the highest rated and awarded IR3550 PowIRstage ICs from International Rectifier, 2X Copper PCB and high current Ferrite Core Chokes rated up to 60A which together are able to deliver up to 60°C* cooler temperatures than traditional motherboards. Featured on a range of new motherboards based the Intel X79 and Z77 Express Chipsets, GIGABYTE Ultra Durable 5 technology is the next evolution in quality motherboard design.
“As the exclusive motherboard manufacturer to utilize the amazingly efficient IR3550 PowIRstage ICs from International Rectifier, GIGABYTE has spent a considerable amount of engineering resources to ensure our Ultra Durable 5 motherboards are our best Ultra Durable motherboards yet,” commented Henry Kao, Vice President of GIGABYTE Motherboard Business Unit. “GIGABYTE Ultra Durable 5 motherboards are especially optimized for water cooled systems and overclocked Intel Core i7-3770K Ivy Bridge “K” SKU CPUs due to their exceptionally low operating temperatures, and make the perfect match for anyone looking to push their system to limits.”
“We are delighted that IR’s award winning IR3550 PowIRstage provides the high current, thermal capability and outstanding performance to power GIGABYTE’s new Ultra Durable 5 motherboard series,” said Deepak Savadatti, Vice President and General Manager, IR’s Enterprise Power Business Unit.
Subject: Motherboards, Shows and Expos | June 4, 2012 - 04:14 PM | Ryan Shrout
Tagged: computex, gigabyte, Z77, thunderbolt, Z77X-UP5 TH
Anandtech has the scoop on a new motherboard being shown at Computex this week from Gigabyte that features not just Thunderbolt support, not just a single Thunderbolt port but DUAL Thunderbolt connections. The Z77X-UP5 TH is the first such PC platform to offer support for four channels of the new connectivity technology.
Image source: Anandtech.com
Both ports can run at the full 10 Gbps speeds thanks to the inclusion of a PLX PCI Express bridge chip so bandwidth restrictions shouldn't be a concern. We don't know the pricing or availability of this new board quite yet but Gigabyte is finally jumping into the world of Thunderbolt after the MSI and ASUS announcements last month.
Hit up the Anandtech link above for more photos of this board!