Kingston's recording breaking RAM
Subject: Memory | September 10, 2010 - 01:50 PM | Jeremy Hellstrom
Tagged:
Crucial senses a disturbance in the force; temperature sensing DIMMs
Subject: Memory | August 30, 2010 - 06:21 PM | Jeremy Hellstrom
Tagged:
Xtreme Computing had a chance to play with Crucial's new Ballistix MOD Temperature-sensing DDR3-1600 @ 8-8-8-24. They have the usual and fairly effective Ballistix heatspreaders, with the orange branding sticker in evidence and they can inform you of their current temperature using the Crucial MOD Utility. In their overclocking tests they could not breach 1820mhz
@ 1.658v though with the temperature sensor some may be tempted to go past that voltage to see if they can be pushed further.
Charting the success of memory overclocks
Subject: Memory | August 23, 2010 - 02:49 PM | Jeremy Hellstrom
Tagged:
HWBot is a board that keeps track of the successes that people have had overclocking various components and the benchmarks generated by those overclocks. MADSHRIMPS delves into one particular component, the RAM and looks at the three variables that generate the most pertinent to overclocking RAM, the Frequency, tCL and tRCD. There is a bit of math you need to follow in order to see how they arrived at the ratings on the charts at the end of the article, but then again if you want to get the b
Own a Clarkdale? Choose your RAM carefully.
Subject: Memory | August 10, 2010 - 12:00 PM | Jeremy Hellstrom
Tagged:
X-bit Labs wanted to see what the integrated memory controller on Clarkdale chips is capable of and so tested it with RAM at speeds of 1333MHz, 1600MHz and 2000MHz with two different timings at each speed. As it turns out, the difference in performance between the three speeds was rather small, while the price of RAM kits rises noticeably. When they tried overclocking the Core i5-655K the results became more interesting and rather damning for the 1600MHz kit. Their findings
Raising the density of RAM, three 4GB DIMMs from Mushkin
Subject: Memory | July 30, 2010 - 01:28 PM | Jeremy Hellstrom
Tagged:
The Mushkin Blackline 12GB kit consists of three 4GB 1600MHz DIMMs running at 9-9-9-24 which lets you up the total memory available to your system without resorting to six DIMMs. That extra density doesn't seem to have much of an effect on overclocking, Overclock3D took the DIMMs past 1900MHz after they loosened the timings a bit. Check out how it changed the performance in the full review.
OCZ Technology Offers the World’s Fastest High-Density 4GB DDR3 Modules Operating at 2133MHz
Subject: Memory | July 13, 2010 - 11:15 AM | Jeremy Hellstrom
Tagged:
SAN JOSE, CA—July 12, 2010—OCZ Technology Group, Inc. (Nasdaq: OCZ), a leading provider of high-performance solid-state drives (SSDs) and memory modules for computing devices and systems, unveils new high-speed 4GB (4096MB) modules for users who demand both performance and bandwidth in one memory solution.
A memory kit that knows just how hot it is
Subject: Memory | July 6, 2010 - 05:32 PM | Jeremy Hellstrom
Tagged:
The Crucial Ballistix Thermal Sensor Memory Kit that Benchmark Reviews got its hands on is similar to other kits that Crucial has released but offers an interesting feature. It has a temperature sensor built in that is able to determine the current voltage, speed, clockings and temperature and display that information for you. While that is a very handy tool for overclockers who are trying to determine just how far their RAM subsystem can be pu
Hitting 2500MHz is not easy, even if the RAM is rated for it
Subject: Memory | June 23, 2010 - 01:25 PM | Jeremy Hellstrom
Tagged:
The Patriot Viper II Sector 5 PC3 20000 4GB kit will set you back almost $350 but if you are looking for RAM speced at 2500MHz you already know you are going to be paying a steep entry fee. The timings look a little odd at first glance, 9-11-9-27 is not a usual set of timings but then again that does hint that there is some room to manoeuvre when you are adjusting your final clock settings. For instance,
Kingston's new HyperX can go two ways
Subject: Memory | June 15, 2010 - 02:48 PM | Jeremy Hellstrom
Tagged:
Kingston's HyperX 1600/1866
LoVo RAM kit takes memory profiles to a new level. The reason that the DIMMs are rated for two speeds comes from the fact that it has two different profiles, the low voltage 1600MHz @ 1.25V or 1866MHz @ 1.35V, both significantly lower than the 1.65V maximum for DDR3 and an Intel Core family chip. The low voltages used mean that you can easily fit these into any system as no heatsinks are n
If you can pay for the best then check out Kingston's 2400MHz kit
Subject: Memory | May 31, 2010 - 02:47 PM | Jeremy Hellstrom
Tagged:
If you have a socket 1156 processor that is looking for some of the fastest dual channel RAM on the planet then check out the Kingston HyperX PC3-19200 (2400MHz @ 9-11-9-27) 4GB kit. The price is unknown to Tweaktown, but at 2.4GHz and with an active cooling solution you know it will not be cheap. You don't have to consider that speed a solid ceiling, Tweaktown hit 2490MHz easily, with a bit more tweaking and a BIOS update or two you could probably top that. 
PC Perspective Upcoming Events
|
