Subject: Memory | November 23, 2009 - 05:47 PM | Jeremy Hellstrom
Do you have a friend or family member that thinks they are a tweaker, when in fact all they are is a serial hardware murderer? Someone who swears they've never touched the BIOS settings even when you are looking at a DIMM that was overvolted to the point it has almost soldered its self to the motherboard? You could put a password and a case lock on, but you could also try the Elixir 6GB 1600MHz kit. Elixir, or Nanya specifically, makes chips that conform to JEDEC standards. No matter what you do to these DIMMs, there is a maximum speed you will hit a ceiling at and not
Subject: Memory | November 13, 2009 - 01:58 PM | Jeremy Hellstrom
The new target to aim for in the land of DDR3 is 2133MHz, thanks to Kingston's HyperX T1 4GB DDR3-2133 dual channel kit. That's PC3-17066
for those of you keeping score. At $464 is is a big investment for 4GB of RAM, but it is the fastest kit on the market right now. Overclocking results saw 2250 MHz at 9-9-9-24 timings, though Pure Overclock admits it was a little unstable and 2200MHz was their highest stable overcl
Subject: Memory | October 30, 2009 - 12:51 PM | Jeremy Hellstrom
iXBT Labs explores the new world of Lynnfield's onboard memory controller and its abilities and disabilities. For instance the controller can do more with single bank modules than with the more common dual bank DIMMs. They examine just how increasing the frequency of the memory compares with increasing the amount of memory available to the processor. Drop by for some interesting results; it seems the days of the 32bit operating system were just yesterday, but it seems that they ended a while
Subject: Memory | October 7, 2009 - 01:50 PM | Jeremy Hellstrom
Patriot has revamped their Viper line to accommodate Lynnfield, dual channel kits like the Patriot Viper II 'Sector 5' are popping up all over. A speed of 2GHz @ 8-8-8-24 gives you
plenty of raw bandwidth to keep your i5/i7 system happy and while Bjorn3D could only get a 136MHz overclock out of the DIMMs, it is possible a different motherboard might squeeze a bit more performance out of this kit.
Subject: Memory | September 22, 2009 - 12:39 PM | Jeremy Hellstrom
Sure, Legit Reviews did have to push the voltage over spec to 1.75V and bump the QPI up to 1.35 but they hit a huge memory overclock. It wasn't even necessary to go that far to get to 2200MHz; they simply asked for it from the DIMMs and they provided, no voltage tweaks or any other BIOS tinkering needed. Read about Kingston's insane HyperX DDR3 4GB 2133MHz Memory, but
Subject: Memory | September 15, 2009 - 11:22 AM | Jeremy Hellstrom
FREMONT, Calif., Sept. 15, 2009 - Corsair, a worldwide leader in high-performance computer memory, power supplies and flash memory products, including solid-state drives, today announced that both 4GB and 8GB Dominator memory solutions have passed Intel's XMP-Ready certification for the newly-introduced Core i7-870 and Core i7-860 CPUs.
The 8GB Dominator GT 1600MHz CAS 8 (CMD8GX3M4A1600C8) is part of Corsair's award-winning Dominator memory solutions. It is qualified and guaranteed to run at a frequency of 1600MHz with tight timings of 8-8-8-24 at a voltage of 1.65V.
Subject: Memory | September 10, 2009 - 05:24 PM | Jeremy Hellstrom
With the arrival of Lynnfield comes a new interest in dual channel DDR3. Many may opt for a pair of 3GB DIMMs, or four 2GB DIMMs there are quite a few that will settle for 4GBs of total system memory, especially if it is fast. Take Kingston's HyperX KHX1600C8D3K2
which is designed to run at 1600MHz, but was easily pushed to over 2000MHz by Overclockers Club. The latencies and voltages had to be changed so little that it seems the memory multiplier lock that stopped the
Subject: Memory | August 28, 2009 - 11:35 AM | Jeremy Hellstrom
FREMONT, Calif., Aug. 27, 2009 - Corsair, a worldwide leader in high-performance computer memory, power supplies and flash memory products, including solid-state drives, today announced a new set of high density products for Intel Core i5 and Core i7 processors. These DIMMs are available in dual and triple channel configurations and are specifically tuned for Intel CPUs.
The 8GB and 12GB module kits feature Corsair's DHX+ cooling technology, and sport new American Racing Blue fins and highlights.
Subject: Memory | August 24, 2009 - 04:01 PM | Jeremy Hellstrom
San Jose, Calif. - August 24, 2009 - OCZ Technology Group, Inc., a worldwide leader in innovative, ultra-high performance and high reliability memory, today unveiled low-voltage DDR3 designed specifically for the upcoming Intel P55 Chipset and subsequent Intel Core i7, i5, and i3 (Socket 1156) processors.
Subject: Memory | August 12, 2009 - 02:51 PM | Jeremy Hellstrom
For some, simply the brand name, possibly the series name and the frequencies are all that is important when choosing RAM. Others try to get under those heatspreaders to see which company made the ICs which are the heart of the RAM. One particular reason for checking under the hood is the recent problems with Elpida made ICs causing difficulties for DDR3 users. Madshrimps has received a number of different RAM kits using Elpida's new chips and tested them out to see what, if any, improvement has been made.