Subject: Memory | January 21, 2010 - 05:39 PM | Jeremy Hellstrom
The OCZ Black Edition DDR3-1600 memory kit is supposed to be designed specifically for AMD Black Edition CPUs. The colour certainly matches and the badge on the heatspreaders are a nice touch but it is really the performance that matters, which is what Benchmark Reviews set out to determine. 8-8-8-24 timings are relatively low, but to refer to RAM that uses the standard DDR3 voltage, 1.65V, as low voltage does seem to be a stretch. Black Edition
Subject: Memory | January 5, 2010 - 08:44 PM | Jonathan Hung
Super Talent is announcing the availability of two high density DDR3 1600MHz kits designed for Intel P55 and X58 systems. The 8GB kit (WP160UX8G9) consists of two 4GB sticks clocking in at 9-9-9-28, and the 12GB kit is identical but with three 4GB sticks.
These two kits should be available this week at resellers.
(Aside: This is painful for me as I just bought 4x2GB DDR3 sticks for my upcoming Lynnfield build. In retrospect I should have opted for 2x4GB instead.)
Subject: Memory | December 15, 2009 - 05:45 PM | Jeremy Hellstrom
Hi-Tech Reviews takes a look at two alternatives to buying high end memory that comes equipped with large heatspreaders. Much of the time it is possible to purchase RAM with similar timings and speed for quite a bit less; or even more fun is to buy lower speed RAM and overclock it until it tries to melt. Picking up a third party cooler ensures that the meltdown won't happen quite as quickly, but the question remains as to whether the high end DIMMs that come equipped with heatspreaders can compete with third party memory coolers.
Subject: Memory | December 15, 2009 - 11:47 AM | Jeremy Hellstrom
FREMONT, California, December 15, 2009 - Corsair, a worldwide leader in high-performance computer and flash memory products, today announced a 24GB Dominator triple-channel DDR3 memory kit designed for high-performance desktop and workstation computing applications.
Corsair's 24GB Dominator DDR3 memory kit has been rigorously tested in high-performance platforms based on the Intel X58 motherboard chipset for Intel Core i7 [Bloomfield] processors.
Subject: Memory | December 9, 2009 - 02:39 PM | Jeremy Hellstrom
HEXUS is investigating the performance of an LGA1156 processor with different memory. They try two different DDR3-1600 kits, one with 4GB and one with 8GB along with a DDR3-2133 kit. In their testing they found very little difference in performance, perhaps because current DDR3 has pretty much saturated what a P55 board can handle. Take a look and see if you really want to spend those extra $$$ on a faster or bigger kit.
Subject: Memory | December 3, 2009 - 11:34 AM | Jeremy Hellstrom
FREMONT, California, December 3, 2009 - Corsair, a worldwide leader in high-performance computer and flash memory products, today announced the launch of its new Dominator GTX ultra-high performance DDR3 memory modules for Intel and AMD platforms, designed specifically for performance enthusiasts, gamers and extreme overclockers.
Corsair Dominator GTX modules are individually screened and tested on multiple high-performance Intel X58 and P55 chipset platforms to ensure that they operate at the incredible frequency of 2250MHz at lo
Subject: Memory | December 1, 2009 - 12:24 PM | Jeremy Hellstrom
A-Data might not be the first company you think about when you purchase RAM, which is why you can be forgiven for not noticing they sell a dual channel DDR3 kit @ 2200 MHZ with timings of 8:8:8:24 1T at the recommended 1.65V. The Guru of 3D even managed to hit 2350MHz by bumping the voltage to 1.7 and could see higher speeds by lowering the timings.
Subject: Memory | November 23, 2009 - 05:47 PM | Jeremy Hellstrom
Do you have a friend or family member that thinks they are a tweaker, when in fact all they are is a serial hardware murderer? Someone who swears they've never touched the BIOS settings even when you are looking at a DIMM that was overvolted to the point it has almost soldered its self to the motherboard? You could put a password and a case lock on, but you could also try the Elixir 6GB 1600MHz kit. Elixir, or Nanya specifically, makes chips that conform to JEDEC standards. No matter what you do to these DIMMs, there is a maximum speed you will hit a ceiling at and not
Subject: Memory | November 13, 2009 - 01:58 PM | Jeremy Hellstrom
The new target to aim for in the land of DDR3 is 2133MHz, thanks to Kingston's HyperX T1 4GB DDR3-2133 dual channel kit. That's PC3-17066
for those of you keeping score. At $464 is is a big investment for 4GB of RAM, but it is the fastest kit on the market right now. Overclocking results saw 2250 MHz at 9-9-9-24 timings, though Pure Overclock admits it was a little unstable and 2200MHz was their highest stable overcl
Subject: Memory | October 30, 2009 - 12:51 PM | Jeremy Hellstrom
iXBT Labs explores the new world of Lynnfield's onboard memory controller and its abilities and disabilities. For instance the controller can do more with single bank modules than with the more common dual bank DIMMs. They examine just how increasing the frequency of the memory compares with increasing the amount of memory available to the processor. Drop by for some interesting results; it seems the days of the 32bit operating system were just yesterday, but it seems that they ended a while