Subject: Memory | November 23, 2010 - 10:56 AM | Jeremy Hellstrom
SAN JOSE, CA—November 23, 2010—OCZ Technology Group, Inc. (Nasdaq:OCZ), a leading provider of high-performance solid-state drives (SSDs) and memory modules for computing devices and systems, unveils new Xtreme Thermal Exchange (XTE) and Blade 2 high-speed desktop memory, providing the optimal balance of blazing DDR3 performance and cooling efficiency in one solution.
Subject: Memory | November 17, 2010 - 03:31 PM | Jeremy Hellstrom
The 4GB OCZ Blade ST 2000MHz Low Voltage DDR3 kit
has quite a bit going for it, from its 9-9-9-24 timings @ 1.65v to the ease it adds to those looking to overclock an LGA1156 CPU. A little tweaking to the BCLK is much easier when your RAM is happy to run at those speeds, removing it as a cause of instability when you are overclocking. Drop by BenchMark Reviews to see these DIMMs in action.
Subject: Memory | October 19, 2010 - 04:33 PM | Jeremy Hellstrom
The G.Skill FLARE PC3-16000
kit is a pair of 2GB DIMMs running at 2000MHz and running you about $180. The high price is the penalty you face for trying to grab some of the fastest RAM available. Once OC3D popped open the kit the AM3 branding seemed a little off as no matter what they tried they could not get these DIMMs runnin
Subject: Memory | September 30, 2010 - 03:44 PM | Jeremy Hellstrom
Picking up a Core i3, i5 or certain i7 CPUs does limit you to dual channel memory if you use an H55 based board and many feel that going that route limits your RAM. Really, the difference between triple channel and dual channel RAM is minuscule and
there is no reason you can't have large amounts of RAM on a dual channel system. G.Skill makes this obvious with their 8GB Trident 2000 MHz DD
Subject: Memory | September 17, 2010 - 12:10 PM | Jeremy Hellstrom
DDR3 is not really that old but has finally overtaken DDR2 for the first choice in memory for new systems. Just like its predecessors, as the DDR3 standard matures manufacturers can get higher frequencies out of their DIMMs and of course charge a premium for those high speed kits. Kingston has been rather forceful in pushing DDR3 to its current limitations and they have just released two new kits. The highest end kit hit 2.5GHz @ 9-11-9-27 during the quick overclock
Subject: Memory | September 14, 2010 - 11:18 AM | Jeremy Hellstrom
SAN JOSE, Calif., Sept. 14, 2010 (GLOBE NEWSWIRE) -- OCZ Technology
Group, Inc. (Nasdaq:OCZ), a leading provider of high-performance
solid-state drives (SSDs) and memory modules for computing devices and
systems, unveils new Ultra-Low Voltage (ULV) and Extreme-Low Voltage
(ELV) high-speed DDR3 desktop memory, providing the optimal balance of
performance and power efficiency in one solution.
Subject: Memory | August 30, 2010 - 06:21 PM | Jeremy Hellstrom
Xtreme Computing had a chance to play with Crucial's new Ballistix MOD Temperature-sensing DDR3-1600 @ 8-8-8-24. They have the usual and fairly effective Ballistix heatspreaders, with the orange branding sticker in evidence and they can inform you of their current temperature using the Crucial MOD Utility. In their overclocking tests they could not breach 1820mhz
@ 1.658v though with the temperature sensor some may be tempted to go past that voltage to see if they can be pushed further.
Subject: Memory | August 23, 2010 - 02:49 PM | Jeremy Hellstrom
HWBot is a board that keeps track of the successes that people have had overclocking various components and the benchmarks generated by those overclocks. MADSHRIMPS delves into one particular component, the RAM and looks at the three variables that generate the most pertinent to overclocking RAM, the Frequency, tCL and tRCD. There is a bit of math you need to follow in order to see how they arrived at the ratings on the charts at the end of the article, but then again if you want to get the b