Dual Channel memory doesn't mean you have to go small

Subject: Memory | September 30, 2010 - 03:44 PM |
Tagged:

Picking up a Core i3, i5 or certain i7 CPUs does limit you to dual channel memory if you use an H55 based board and many feel that going that route limits your RAM.  Really, the difference between triple channel and dual channel RAM is minuscule and
there is no reason you can't have large amounts of RAM on a dual channel system.  G.Skill makes this obvious with their 8GB Trident 2000 MHz DD

Source: techPowerUp!

Pushing the DDR3 spec

Subject: Memory | September 17, 2010 - 12:10 PM |
Tagged:

DDR3 is not really that old but has finally overtaken DDR2 for the first choice in memory for new systems.  Just like its predecessors, as the DDR3 standard matures manufacturers can get higher frequencies out of their DIMMs and of course charge a premium for those high speed kits.  Kingston has been rather forceful in pushing DDR3 to its current limitations and they have just released two new kits.  The highest end kit hit 2.5GHz @ 9-11-9-27 during the quick overclock

Source: InsideHW

OCZ Technology Announces Next Generation Ultra-Low and Extreme-Low Voltage DDR3 Memory Kits

Subject: Memory | September 14, 2010 - 11:18 AM |
Tagged:

SAN JOSE, Calif., Sept. 14, 2010 (GLOBE NEWSWIRE) -- OCZ Technology
Group
, Inc. (Nasdaq:OCZ), a leading provider of high-performance
solid-state drives (SSDs) and memory modules for computing devices and
systems, unveils new Ultra-Low Voltage (ULV) and Extreme-Low Voltage
(ELV) high-speed DDR3 desktop memory, providing the optimal balance of
performance and power efficiency in one solution.

Kingston's recording breaking RAM

Subject: Memory | September 10, 2010 - 01:50 PM |
Tagged:

Source: 3DCenter

Crucial senses a disturbance in the force; temperature sensing DIMMs

Subject: Memory | August 30, 2010 - 06:21 PM |
Tagged:

Xtreme Computing had a chance to play with Crucial's new Ballistix MOD Temperature-sensing DDR3-1600 @ 8-8-8-24.  They have the usual and fairly effective Ballistix heatspreaders, with the orange branding sticker in evidence and they can inform you of their current temperature using the Crucial MOD Utility.  In their overclocking tests they could not breach 1820mhz
@ 1.658v though with the temperature sensor some may be tempted to go past that voltage to see if they can be pushed further.

Charting the success of memory overclocks

Subject: Memory | August 23, 2010 - 02:49 PM |
Tagged:

HWBot is a board that keeps track of the successes that people have had overclocking various components and the benchmarks generated by those overclocks.  MADSHRIMPS delves into one particular component, the RAM and looks at the three variables that generate the most pertinent to overclocking RAM, the Frequency, tCL and tRCD.  There is a bit of math you need to follow in order to see how they arrived at the ratings on the charts at the end of the article, but then again if you want to get the b

Source: Madshrimps

Own a Clarkdale? Choose your RAM carefully.

Subject: Memory | August 10, 2010 - 12:00 PM |
Tagged:

X-bit Labs wanted to see what the integrated memory controller on Clarkdale chips is capable of and so tested it with RAM at speeds of 1333MHz, 1600MHz and 2000MHz with two different timings at each speed.  As it turns out, the difference in performance between the three speeds was rather small, while the price of RAM kits rises noticeably.  When they tried overclocking the Core i5-655K the results became more interesting and rather damning for the 1600MHz kit.  Their findings

Source: X-Bit Labs

Raising the density of RAM, three 4GB DIMMs from Mushkin

Subject: Memory | July 30, 2010 - 01:28 PM |
Tagged:

The Mushkin Blackline 12GB kit consists of three 4GB 1600MHz DIMMs running at 9-9-9-24 which lets you up the total memory available to your system without resorting to six DIMMs.  That extra density doesn't seem to have much of an effect on overclocking, Overclock3D took the DIMMs past 1900MHz after they loosened the timings a bit.  Check out how it changed the performance in the full review.

Source: Overclock3D

OCZ Technology Offers the World’s Fastest High-Density 4GB DDR3 Modules Operating at 2133MHz

Subject: Memory | July 13, 2010 - 11:15 AM |
Tagged:

SAN JOSE, CA—July 12, 2010—OCZ Technology Group, Inc. (Nasdaq: OCZ), a leading provider of high-performance solid-state drives (SSDs) and memory modules for computing devices and systems, unveils new high-speed 4GB (4096MB) modules for users who demand both performance and bandwidth in one memory solution.

A memory kit that knows just how hot it is

Subject: Memory | July 6, 2010 - 05:32 PM |
Tagged:

The Crucial Ballistix Thermal Sensor Memory Kit that Benchmark Reviews got its hands on is similar to other kits that Crucial has released but offers an interesting feature.  It has a temperature sensor built in that is able to determine the current voltage, speed, clockings and temperature and display that information for you.  While that is a very handy tool for overclockers who are trying to determine just how far their RAM subsystem can be pu