Subject: General Tech, Displays, Storage | June 19, 2014 - 03:56 PM | Ryan Shrout
Tagged: Samsung, ssd, 840 evo, 1TB, amazon, pb287q, asus, 4k
A couple of really nice Amazon picks hit my email box today and I thought they were worth posting for our readers as well.
First, and clearly the most exciting: the 1TB version of the Samsung 840 EVO SSD is now selling for just $399. That comes in at $0.399/GB, which is actually better than the cost per GB of the Crucial MX100 that launched this month. If you haven't picked up an SSD that is big enough to hold all your games, this is the perfect opportunity!
Also, after our review went up at the end of May, the 4K ASUS PB287Q 28-in monitor is finally up for sale on Amazon for $649 with a shipping date of July 1st. If you think you might be interested in the universe of gaming at 4K, now is a great time to jump in.
Thanks for supporting PC Perspective!
Subject: General Tech, Displays | June 8, 2014 - 05:09 PM | Scott Michaud
Tagged: wacom, Cintiq, Intuos, hack
A couple of years ago, you might remember my review of the Wacom Cintiq 22HD. It was not a review unit. I was originally saving for the Cintiq 24HD until the 22HD and the 24HD Touch were announced. At that point, I was making decision whether to upgrade to the 24HD with a touchscreen for Windows 8 development, or save some money and get the 22HD. If you have read my many editorials on Windows Store certification requirements, you might guess that, at least I believe, I made the right decision.
Image Credit: Hack a Day
This purchase was actually the second graphics tablet that I owned. Years earlier, I purchased an Adesso CyberTablet 12000 but had problems with drawing in one location and seeing the results in another. I, then, transitioned to scanning pencil-and-paper and inking/filling them with a mouse. It was at that point that I took a gamble on a Wacom Cintiq.
Why am I telling this story? Wacom Cintiqs are based on the same technology as their Intuos tablets, even down to pen compatibility, with a display built in. Well, at Hack a Day, one of their clever readers decided to make their own Cintiq out of what appears to be a Wacom Intuos3 A5. Basically, he fit a replacement 9.7-inch, 2048x1536 display, designed for Retina iPads and similar tablets, behind the touch sensor. It apparently worked without much fuss.
You can find Wacom Intuos3 6 x 8-inch pen tablets for about 120-150$ used. You can also find a 9.7-inch 2048x1536 panel and the other necessary hardware for about $70. While it is not an exact replacement for a Wacom Cintiq, it is the best you will do for under $250 (or even under $900).
Subject: Displays | June 4, 2014 - 04:20 PM | Jeremy Hellstrom
Tagged: miracast, philips, 239C4QHWAB, ips display
We interrupt your Computex news stream with a product that is currently for sale, the Philips Brilliance 239C4QHWAB with Miracast support. The screen itself is something we have seen before, a 1080p 23" IPS display with HDMI and VGA inputs on the base along with an audio and microphone input. Now those specs will not impress a gamer looking for a 4k display but for someone with an Android device that wants to stream 1080p video via Miracast thanks to the in built support the resolution and connections are perfect. Check out how well it handles Miracast at Bjorn3D.
"With the rise of mobile devices the need to be able to hook them up to a screen has increased. While both Apple TV and to some extend Google Chromecast offers ways to mirror the screen on supported devices or at least stream some content they both requier extra hardware. There is however another solution: Miracast."
Here are some more Display articles from around the web:
- 4K for $649: Asus' PB287Q monitor @ The Tech Report
- Asus PB287Q 4K UHD 28 inch @ Kitguru
- ASUS PB287Q 28-in 4K Single Stream 60Hz Monitor Review @ Legit Reviews
- AOC Q2770PQU 27″ PLS @ eTeknix
- AOC U2868PQU 4K UHD 28 inch Monitor @ Kitguru
- BenQ RL2460HT 24" Gaming Monitor Review @ Hardware Canucks
- BenQ XL2720Z Gaming Monitor @ FunkyKit
Subject: Graphics Cards, Displays | June 4, 2014 - 12:40 AM | Ryan Shrout
Tagged: gsync, g-sync, freesync, DisplayPort, computex 2014, computex, adaptive sync
AMD FreeSync is likely a technology or brand or term that is going to be used a lot between now and the end of 2014. When NVIDIA introduced variable refresh rate monitor technology to the world in October of last year, one of the immediate topics of conversation was the response that AMD was going to have. NVIDIA's G-Sync technology is limited to NVIDIA graphics cards and only a few (actually just one still as I write this) monitors actually have the specialized hardware to support it. In practice though, variable refresh rate monitors fundamentally change the gaming experience for the better.
At CES, AMD went on the offensive and started showing press a hacked up demo of what they called "FreeSync", a similar version of the variable refresh technology working on a laptop. At the time, the notebook was a requirement of the demo because of the way AMD's implementation worked. Mobile displays have previously included variable refresh technologies in order to save power and battery life. AMD found that it could repurpose that technology to emulate the effects that NVIDIA G-Sync creates - a significantly smoother gaming experience without the side effects of Vsync.
Our video preview of NVIDIA G-Sync Technology
Since that January preview, things have progressed for the "FreeSync" technology. Taking the idea to the VESA board responsible for the DisplayPort standard, in April we found out that VESA had adopted the technology and officially and called it Adaptive Sync.
So now what? AMD is at Computex and of course is taking the opportunity to demonstrate a "FreeSync" monitor with the DisplayPort 1.2a Adaptive Sync feature at work. Though they aren't talking about what monitor it is or who the manufacturer is, the demo is up and running and functions with frame rates wavering between 40 FPS and 60 FPS - the most crucial range of frame rates that can adversely affect gaming experiences. AMD has a windmill demo running on the system, perfectly suited to showing Vsync enabled (stuttering) and Vsync disabled (tearing) issues with a constantly rotating object. It is very similar to the NVIDIA clock demo used to show off G-Sync.
The demo system is powered by an AMD FX-8350 processor and Radeon R9 290X graphics card. The monitor is running at 2560x1440 and is the very first working prototype of the new standard. Even more interesting, this is a pre-existing display that has had its firmware updated to support Adaptive Sync. That's potentially exciting news! Monitors COULD BE UPGRADED to support this feature, but AMD warns us: "...this does not guarantee that firmware alone can enable the feature, it does reveal that some scalar/LCD combinations are already sufficiently advanced that they can support some degree of DRR (dynamic refresh rate) and the full DPAS (DisplayPort Adaptive Sync) specification through software changes."
The time frame for retail available monitors using DP 1.2a is up in the air but AMD has told us that the end of 2014 is entirely reasonable. Based on the painfully slow release of G-Sync monitors into the market, AMD has less of a time hole to dig out of than we originally thought, which is good. What is not good news though is that this feature isn't going to be supported on the full range of AMD Radeon graphics cards. Only the Radeon R9 290/290X and R7 260/260X (and the R9 295X2 of course) will actually be able to support the "FreeSync" technology. Compare that to NVIDIA's G-Sync: it is supported by NVIDIA's entire GTX 700 and GTX 600 series of cards.
All that aside, seeing the first official prototype of "FreeSync" is awesome and is getting me pretty damn excited about the variable refresh rate technologies once again! Hopefully we'll get some more hands on time (eyes on, whatever) with a panel in the near future to really see how it compares to the experience that NVIDIA G-Sync provides. There is still the chance that the technologies are not directly comparable and some in-depth testing will be required to validate.
Subject: Displays | June 3, 2014 - 10:50 PM | Sebastian Peak
Tagged: philips, ips, dual monitor, computex 2014, computex
Philips has announced what they are calling the worlds first "virtually seamless" two-in-one monitor.
The Philips Two-in-One monitor proudly showing Computex gold (though not as prestigious as the PC Perspective gold award, of course...)
The 19DP6QJNS (love those model names, don't you?) is comprised of two separate 19" IPS displays on a single mount, and the ultra-thin 3.5mm bezels allow for the that "virtual" seamlessness.
The announcement does not include screen resolution, and from the images the screens don't appear at least to be the usual 16:9 aspect ratio. Even without all of the details there is a clear advantage to a design with a reduced footprint. It's just a more, well, seemless (there's that word again) dual-monitor setup. Each display has its own video inputs, though they are different. The first display has a DisplayPort and VGA input, and the second has a VGA input and MHL-enabled HDMI input. The monitors can tilt up to 22 degrees, and each screen also has a pair of USB ports.
So about the resolution... Philips states that this new product is "ideal for designers using 3D graphics or requiring extremely detailed information for CAD-CAM solutions," so one wouldn't be faulted for assuming a higher resolution panel here, but we will have to see. This is certainly a niche product, but anyone who has grown accustomed to a dual monitor setup will probably tell you they are more productive (and would never willingly go back). If this is reasonably priced, two IPS screens on a single stand would be a really attractive proposition.
The Philips 19DP6QJNS will be available fall 2014, and no pricing information yet.
Subject: General Tech, Displays, Mobile | June 3, 2014 - 07:54 PM | Jeremy Hellstrom
Tagged: vesa, dockport, DisplayPort, amd
Remember DockPort? The three in one connection we have discussed in the past? The Thunderbolt-ish connection for devices with DisplayPort which allows transmission of audio and video plus USB data and power all on one connector. It's here! (even if the devices aren't quite common yet)
NEWARK, CA (3 June 2014) The Video Electronics Standards Association (VESA) today announced the release of the DockPort standard. Developed by several VESA member companies, DockPort is an optional extension of the DisplayPort standard that will allow USB 3.1 data and DC power for battery charging to be carried over a single DisplayPort connector and cable that also carries high-resolution audio/video (A/V) data.
This new extension of the DisplayPort standard is fully backward compatible with all existing DisplayPort devices. When a DockPort-enabled DisplayPort source such as a computer or tablet is connected with a DockPort-enabled DisplayPort sink such as a display monitor or docking station A/V plus USB data and power will be transferred over a common cable through a single connector. If either the source or sink device is not a DockPort-enabled, then source and sink will recognize only the DisplayPort A/V data stream.
As computing platforms become increasingly mobile, it becomes necessary to reduce the number of external connectors, explained Steve Belt, Corporate Vice President - Strategic Alliances & Solutions Enablement AMD, a VESA member company. With DockPort, VESA has developed a technology standard that enhances elegant docking designs, reduces mobile form factors, and enriches the user experience with streamlined, one-cable access to a wide range of external displays, peripherals and storage.
DockPort is the first royalty-free industry standard that combines these three essential interface functions into a single connector. VESA first revealed its intention to develop this standard at the 2014 International Consumer Electrics Show. It anticipates that several vendors will demonstrate DockPort-enabled DisplayPort systems at Computex Taiwan, which begins today.
Until today, most mobile computing platforms required three separate interfaces to support power charging, data transmission and external video, said Chris Griffith, Business Development Manager for Consumer and Computing Interface at Texas Instruments, a VESA member company. With DockPort, VESA has elegantly merged this ungainly tangle of wires into a single, sleek connector, combining power charging with the industrys most popular data transportUSBand the industrys highest-speed A/V transportDisplayPort. DockPort can reduce system implementation cost as designers can reduce external connectors and simplify docking implementations.
VESA is developing a compliance test protocol to certify systems that meet the DockPort standard. Systems that satisfy this test protocol will be permitted to display VESAs new DockPort logo on their packaging as a guide for consumers seeking this capability.
The new DockPort standard demonstrates the enormous adaptability of the DisplayPort standard, according to VESA Board Chair Alan Kobayashi, Fellow & Executive R&D Management for DisplayPort Group at MegaChips Technology America. On the one hand, DisplayPort is a flexible A/V transport protocol that easily coexists with other protocols, like USBit plays nicely with others. On the other hand, DisplayPort is also a robust and proven connector design whose electro-mechanical properties can accommodate data and power over a common passive copper cable and interface.
Subject: General Tech, Displays, Shows and Expos | June 2, 2014 - 03:27 PM | Scott Michaud
Tagged: XB280HK, g-sync, computex 2014, computex, acer, 4k
Speaking of G-Sync monitors, Acer has announced a 4K monitor ahead of Computex with NVIDIA's adaptive refresh rate technology. While they do not ever say that it is 60Hz, I believe that it is. It also seems to be based on a TN panel. It, being G-Sync, connects with DisplayPort 1.2 and also includes four USB 3.0 ports. It, however, does not seem to support the competing AMD's FreeSync, integrated into VESA's DisplayPort 1.2a standard.
We do not currently have an image of the monitor
4K could be where we really start seeing benefits for G-Sync. At that resolution, it is very difficult to get a system, regardless of how many GPUs are inside it, which can play the most modern of games without dipping below 60 FPS. Once you miss your 16.67 millisecond window, your game starts hitching between images living 33.33ms and 16.67ms, when each frame is supposed to be presented at a constant rate.
As for pricing and availability: Q2 (early May to end of July). That's all we know.
For more Computex 2014 coverage, please check out our feed!
Subject: General Tech, Displays, Shows and Expos | June 2, 2014 - 02:28 PM | Scott Michaud
Tagged: g-sync, displays, display, computex 2014, computex, asus, 2560x1440, 144hz, 1440p
NVIDIA's G-Sync allows video cards to time the refresh rate of monitors. This is an advantage because the GPU knows when a frame is actually ready to be displayed to the user. The initial batch of announcements were each 1080p monitors, which are least likely to dip down into the 30-60Hz gap where G-Sync is noticeable.
Today at Computex, ASUS has announced a 27", 2560x1440, 144Hz G-Sync display. This higher resolution is starting to reach the point where faster graphics cards struggle to maintain 60 FPS. Not only that, but it is one of the first 1440p panels that you can get which supports high (over 100Hz) refresh rates, officially. Others exist, but "rare" is an understatement.
Its response rate is 1ms (GTG) which, unfortunately, suggests a TN panel. This might be a deal-breaker for some, but if you are looking for a G-Sync, 1440p, and high refresh rate panel, then it might be an acceptable compromise.
The ASUS PG278Q is available in Q2, which ASUS seems to define as the beginning of May to the end of July, for $799 USD. Unfortunately for AMD fans, the panel does not seem to support FreeSync, recently added to DisplayPort 1.2a. FreeSync, of course, is the competitor to G-Sync that AMD proposed to the VESA standards body.
For more Computex 2014 coverage, please check out our feed!
Subject: General Tech, Displays | June 2, 2014 - 03:20 AM | Scott Michaud
Tagged: pq321q, PA328Q, displays, display, computex 2014, computex, asus, 4k
You might remember the ASUS PQ321Q 4K monitor from last year that we loved. It was based on an IGZO panel and allowed for 60Hz via one DisplayPort 1.2 cable, running in Multi Stream Transport (MST). At Computex 2014, ASUS announced the PA328Q. This "ProArt" panel ships calibrated and offers 10-bit, 100% sRGB color representation. More interestingly, it supports HDMI 2.0 as well as DisplayPort 1.2, for 4K at 60Hz, apparently over a single cable.
The monitor also has an extra mini DisplayPort connector and two HDMI 1.4 inputs. Also, four (4) USB 3.0 ports and a headphone jack. I guess professionals like high-speed removable storage.
Some points that I would like to see clarified are:
- its Adobe RGB coverage (for printer color spaces)
- its panel type (I expect IGZO)
- and its pricing (and availability)...
I do not know how this fits in to the ASUS product stack, relative to the $3500 PQ321Q. It includes more modern connections and could hit the checkboxes for digital content creation at 4K. Its price might give us an idea about where it stands... or it might just blow our minds, one way or the other. For now, I don't know.
For more Computex 2014 coverage, please check out our feed!
4K for $649
The growth and adoption of 4K resolution panels (most commonly 3840x2160) has really been the biggest story of the past year or so in the world of PC gaming. After a couple of TVs that ran at 3840x2160 over HDMI at 30 Hz found there way into our offices, the first real 60 Hz 4K monitor that I got some hands on time with was the ASUS PQ321Q. This monitor was definitely targeted at the profressional market with its IGZO display (near IPS quality) and somewhat high price tag of $3500. It has since dropped to $2400 or so but it remains somewhat complicated by the use of MST technology (multi-stream transport) that was required to hit 60 Hz.
Earlier this month I took a look at the Samsung U28D590D 28-in 4K panel that was capable of 60 Hz refresh rates for just $699. This display used a single-stream transport DisplayPort connection to keep setup simple but used a TN panel rather than IPS/IGZO. This meant viewing angles were not as strong (though better than most TN screens you have seen before) but...that price!
Today we have our second low cost, SST 4K monitor to evaluate, the ASUS PB287Q. We saw it at CES back in January and with a launch date of June 10th and an MSRP $649, ASUS is setting itself up for an impressive release.
So what can you expect if you purchase the ASUS PB287Q 4K monitor? In short you get an adequate screen that won't live up to IPS standards but is just good enough for the PC gamer and productivity user in all of us. You'll also get a form factor that well exceeds that of the Samsung U28D590D with fully moveable stand and VESA mounting. And a price of $649 for a 3840x2160 screen doesn't hurt either.
Read on the next pages for more details on the user experience in Windows 8.1 as well as while gaming to see if this is the right monitor for you to buy this summer!