Subject: Cases and Cooling | December 19, 2004 - 02:50 AM | Mark McKee
For those of you looking into watercooling, you might want to check out a review of the ThermalTake Aquarrius 3 watercooling kit. You can find it over at PimpedOutCases.net
" The Aquarius III is a unique little unit. The previous Aquarius models
were a series of parts one had to install into their PC case, including a separate water block, reservoir/pump combination, and radiator. They
took quite a time investment to install properly and effectively.
Subject: Cases and Cooling | December 17, 2004 - 11:37 AM | Jeremy Hellstrom
The Aquagate from CoolerMaster that OCTools reviews one of the few watercooling related links I found this week. To fill the rest up you have 2 air coolers and a run of nice looking cases. I'll be back in January, so to all I wish a Merry Christmas & happy New Year, and to the rest, enjoy your Hanukkah,
Kwanzaa, O Shohgatsu, Diwali, Soyal, Tongji or Winter Solstice!
"The Cooler Master Aquagate Liquid Cooling System is
Subject: Cases and Cooling | December 16, 2004 - 12:04 PM | Jeremy Hellstrom
AeroCool is offering a snazzy front panel with fan control, LED temperature readout, a Card reader, even SATA connections. Read all about it at Club OC. If a silently cooled video card, or a chillin' hard drive is more your style, read on to see what's new.
"The Cool Panel is a UNIVERSAL controller which means it will work with any computers system out there, as long as the system actually has USB, SATA and so on...
Subject: Cases and Cooling | December 15, 2004 - 11:36 AM | Jeremy Hellstrom
Today bigger is better in the eyes of mainstream air cooled heatsinks. With the heat generated by the Prescott's, and to a lesser degree, the A64 series, I can certainly understand why. Overclockers Austraila looks at 5 of the biggest, baddest coolers out there, so pick which one to put in your stocking.
"OCAU looked at five coolers for P4 CPUs, in the "this is getting silly" size range.
Subject: Cases and Cooling | December 13, 2004 - 11:41 AM | Jeremy Hellstrom
Silverstone is now designing special heatsinks designed to keep the noise down in their new upside down case, and it comes with a windtunnel too. SilentPCReview looks, and listens to see how good this case is.
"The flagship model from Silverstone is a tall mid-tower aluminum-steel hybrid with a host of unique features: Upside down mounting of the motherboard, a "wind tunnel" duct that directs the airflow of two 120mm fans in push-pull mode across the CPU area, separate thermal zones, a hinged front bezel, etc.
Subject: Cases and Cooling | December 10, 2004 - 11:38 AM | Jeremy Hellstrom
Danger Den is a very well known watercooling company, and their TDX series shows why. Club Overclocker takes you through the performance of a socket 939 cooler. Or, if you are feeling adventurous, why not build your own heatcore. Enjoy the weekend!
"Some people think that water cooling can be dangerous, hard to put together, and unreliable, but Danger Den has been active in the water cooled PC market for years, and speaking from personal experience I have yet to experience any kin
Subject: Cases and Cooling | December 8, 2004 - 01:13 PM | Jeremy Hellstrom
Heatsinks are growing in size at an unbelievable rate, just check out this Zalman that Systemcooling just reviewed. If you are happy with the cooling on your CPU, maybe your HDD's, RAM or graphics card could chill a bit.
"The CNPS-7700 Cu is Zalman's latest (and largest) addition to their line of radial coolers. This monster measures 5 3/8"/136mm in diameter, and stands 2 5/8"/67mm tall yet masses only 2.0lbs./0.91kg.
Subject: Cases and Cooling | December 7, 2004 - 12:19 AM | Mark McKee
For those of us that overclock, there is a never ending battle to keep the cpu stable and the temperature low. It looks like Coolermaster has an addition to the selection of heatsinks and fans we use to battle high temperature. What is Coolermaster's answer to the battle on temperature? Introducing the Hyper48 Copper Heatpipe Cooler.
Subject: Cases and Cooling | December 6, 2004 - 12:00 PM | Jeremy Hellstrom
So what if you made a huge heatsink, and hollowed it out that your entire system could fit in it, and then filled most of the remaining space with heatpipes? You'd have Zalman's TNN500AF case, and X-bit Labs does a great review on it. My only warning about it is the price, a quick look shows the cheapest price to be around $1000.00.
"The new system case from Zalman, the TNN500AF model, beats its precursor, the TNN500A, in every respect. The new system is more efficient, functional and easier to assemble and use.
Subject: Cases and Cooling | December 5, 2004 - 07:42 PM | Mark McKee
Check out the Raidmax Cobra 822 case review over at Overclockers Online.
It isn't often that you see a case of this type turning up on our
desks. Indeed, I have never personally owned one and could not see the lure
to the bright lights, odd styled windows, and themed bezels. I'm talking
about heavily pre-modded cases; Thermaltake, Raidmax, Cooler Master, Antec,
and so many more all do it in some form. These are the cases that were built
to grab attention.