Subject: Cases and Cooling | October 1, 2004 - 11:39 AM | Jeremy Hellstrom
Not to much action in the watercooling world this week, but the three I got I give to you. Including GruntvillE reviewing at a very good performer, the Alphacool NexXxos XP block.
"The Alphacool NexXxos XP block turned in a very impressive performance and really compares well against the top US designed blocks that I put it up against.
Subject: Cases and Cooling | September 29, 2004 - 12:24 PM | Jeremy Hellstrom
If it moves air to cool your PC, chances are that at least one of these reviews will cover that area. Start it all off with and odd looking dual fan from Coolermaster, put through it's paces by ExtremeMhz.
'Recently, many enthusiast manufacturers have been starting to shift away from the standard 80mm fan design. This has resulted in several very odd looking setups, and today we get to take a look at Cooler Master's entry — the Dual Storm.
Subject: Cases and Cooling | September 27, 2004 - 12:10 PM | Jeremy Hellstrom
Thermaltake has designed a case specifically made to accomodate external radiators, and Overclocker Cafe takes a look at it. If that's not enough, further down we have 2 multifunction panels, and some thumb screws that are a little more artistic than normal.
"If you look closely you will see multiple 3/8' indentations, ten to be exact in several places. These can be punched out so that 3/8' OD hosing can be run through there to reach an external radiator or reservoir if you choose.
Subject: Cases and Cooling | September 24, 2004 - 11:46 AM | Jeremy Hellstrom
Copper ain't so shiny no more? Your transparent tubing letting you see your liquid cooling system looks like it uses Slushie mix? Maybe this article's for you! Or if you just want to toss it and buy a new one, look at the kits being reviewed this week.
"Here you can see some of the residues left on the acrylic tops from such a long period of use. Most likely under closer inspection, you could find a similar residue over the surface of the interior of your copper blocks.
Subject: Cases and Cooling | September 22, 2004 - 11:54 AM | Jeremy Hellstrom
As you can see, it is a quiet one, and able to keep a P4 cool n' froody. If you haven't read Robotech's review of the CoolerMaster Hyper 6, shame on you! Drop what you're doing and read it, now.
"Up until this point, Asus had not sold heatsinks under its brand name, and was known primarily as a videocard and motherboard manufacturer.
Subject: Cases and Cooling | September 20, 2004 - 12:15 PM | Jeremy Hellstrom
Is it just me, or are a lot of case manufacturers re-usung each others model names, usually with a fighting theme of some sort? Well, true or not, the Cavalier that Viper Lair reviews would stand out in any battlefield. Much like a Glitterboy for you Rifts fans :-)
"The basic design of the Chieftec case has not changed for over two years, but it still remains one of the nicer looking cases today, at least in our opinion.
Subject: Cases and Cooling | September 17, 2004 - 11:38 AM | Jeremy Hellstrom
One lonely watercooling review, from SystemCooling, and some miscellaneous additions to your cooling setup. The Enermax Panel might be something you are looking for, it reads most memory cards, has serial ATA connectors for external devices, USB & Firewire ... plus it's a fan controller.
"GlobalWIN has always brought quality and innovation to the market. Whether it's power supplies, cases, heatsinks, hard drive enclosures or other accessories you always know that it's going to be some of the best hardware available.
Subject: Cases and Cooling | September 15, 2004 - 12:16 PM | Jeremy Hellstrom
ExtremeMhz takes a look at a new companies heatsink. There's a lapping kit to look at, or maybe you are more concerned about noise dampening? Don't forget the 3 way fanless VGA cooler showdown, and for those neat-freaks out there, PCI slot covers!
Our long overdue review of the Cooler Master Hyper 6 Heatsink Fan (HSF) is finally up. The Hyper 6 combines brute size with innovative engineering into one of the highest performing heatsink fans on the planet.
Subject: Cases and Cooling | September 13, 2004 - 11:52 AM | Jeremy Hellstrom
Whether you are more concerned with how your case looks on the outside, or on the inside, there should be something to tweek your interest today. Start off with the Mutant X, and see what else catches your eye.
"Wanting to get away from the sometimes boring and average looking cases that are out on the market, Kingwin designed the Mutant X case for those who want to be a little on the wild side. Many of today's cases have a plain or modern and sterile look to them that may not appeal to everyone.