Subject: Cases and Cooling | August 22, 2005 - 12:20 PM | Jeremy Hellstrom
Antec's P180 will give you a classy look in the BTX style, while still accepting the installation of ATX boards. Washable filtres and 4 120mm fans make it a top air cooler to start with, and the extra space inside could easily fit a pump and reservior, if you were so inclined. The full story is at Legit Reviews, go read it.
"In the end, the P180 is one of the finest cases I've ever seen.
Subject: Cases and Cooling | August 19, 2005 - 11:54 AM | Jeremy Hellstrom
Asetek has a WaterChill 3/8" ID Power Kit, which includes CPU, GPU and NB Waterblocks with a 120mm Radiator cooled by 3 fans. The CPU waterblock is designed for Intel's LGA 775 (Socket T), thought the GPU block should fit almost any card. Read the full review at PimpRig.
"My initial expectations of this kit is that in it's complete configuration it will provide very reasonable performance but that better performance could be achieved with a little "tw
Subject: Cases and Cooling | August 17, 2005 - 11:59 AM | Jeremy Hellstrom
Weighing in at only 334 grams, and
around 7.5 - 8 cm a side, the Nexus AXP-3200 is tiny compared to most heatsinks available today. MODTHEBOX has a full review of this low noise CPU cooler, see how it performed in their tests.
"The AXP-3200 introduces Nexus's new SkiveTekÂ® technology which involves the process of shaping materials to produce high fin density thermal solutions. The AXP-3200 includes patented V-shaped fins which optimize the airflow and prevent air obstruction.
Subject: Cases and Cooling | August 15, 2005 - 12:12 PM | Jeremy Hellstrom
Thermalrock has released the Eclipse chassis, and Phoronix has a good look at it. Along with some interesting additions, this case has the tool-less assembly and 120mm fans that are almost standard in PC Cases this year.
"ThermalRock, a division of Thermaltake, has diverted away from the design of traditional ATX cases in favor of offering a new level of innovation with such things as CD storage on the front bezel.
Subject: Cases and Cooling | August 12, 2005 - 11:58 AM | Jeremy Hellstrom
SystemCooling has a Swiftech MCP655 12 VDC Pump to review, and it does exactly what Swiftech says; it improves on the MCP650. There is a pot on the pump, letting you run it at anywhere between 5 and 14 V, with a simple twist of the wrist.
"In their on going quest for the perfect PC water-cooling pump, Swiftech has recently released the MCP655 12 VDC Pump, which features several key improvements over the ori
Subject: Cases and Cooling | August 10, 2005 - 12:15 PM | Jeremy Hellstrom
Asetek has released a line of Vapochill CPU heatsinks designed to be air cooled, not watercooled. There are 3 models in the series, and Overclockers Online has posted a review of the Ultra Low Noise version. It performs fairly well, and does so nearly silently.
"The addition to the Asetek arsenal is more traditional than a phase change or water cooling system, but still cutting edge in its own right.
Subject: Cases and Cooling | August 8, 2005 - 01:22 PM | Jeremy Hellstrom
Starting off with the full sized systems at the top, and carrying on into SFF enclosures perfect for home theatre use, there are a few recent case reviews to check out. Start with Extreme Overclocking's review of the Antec TX1050B.
"Antec is one of the top most recognized brand names when it comes to high-end PC enclosures. The original Performance Series is undoubtedly the most well-known Antec design, and each new generation since then has been based on this classic chassis.
Subject: Cases and Cooling | August 5, 2005 - 11:47 AM | Jeremy Hellstrom
Asetek has released a 12V Waterchill reservoir and pump, and PimpRig has it for review. While it may not be a top of the line performer, some of the extras that it comes with may influence your decision somewhat.
"Odd shape or not, the reservoir is very precisely mated to the pump body over the inlet to the impeller making for a very clean look. A small tube is modeled into the back of the reservoir to accommodate a LED which is accessible from the underside of the pump.
Subject: Cases and Cooling | August 4, 2005 - 11:43 AM | Jeremy Hellstrom
Your Graphic card's GPU and RAM are probably the 2 hottest components in your case. While it is common to have a fast main processor running at 35-45 C, the GPU is often nearly twice that temperature. Treat the poor card to a Zalman VF700-Cu, not only will the card be cooler, but the fan has a silent setting too. Read the full story at Xtreme Resources.
"Is your video card one of those that is getting very hot and even
Subject: Cases and Cooling | August 3, 2005 - 12:04 PM | Jeremy Hellstrom
Gigabyte seems to produce everything nowadays, and is doing a good job of it to boot. Next on their list is CPU heatsinks, like the G-Power Cooler Pro that is reviewed at ExtensionTech, that will keep your chips cool and good looking. Also included are 2 news releases from Muskin, and some dust proof fans.
"Gigabyte, a name you'd come to think of as a motherboard company, has been diversifying themselves over the last few years.