Subject: Cases and Cooling | November 26, 2004 - 11:57 AM | Jeremy Hellstrom
Everything comes in kits nowadays, and watercooling is no exception. For around US$150, you can have Thermaltakes's newest watercooling kit, and The Tech Zone picked one up to review. Plus a guide on how to assemble watercooling systems in general and Asetek's watercooling kit as well.
"Not too long ago, water cooling was reserved for the elite, adventurous few who are willing to pay the extra bucks for the extra cooling power.
Subject: Cases and Cooling | November 24, 2004 - 11:35 AM | Jeremy Hellstrom
Air cooling innovations are still coming out, even with the growth of water cooling as a solution for top preforming PC's. With 120mm fans and multiple heat pipes being the main improvements lately, it is nice to see someone improve that which usualy gives me the most trouble, the retention clip. Phoronix reviews the Spire VertiCool and one of the comments that stood out for me was "
The Spire VertiCool is among the easiest heatsinks on the market as far as installation is concerned."
Subject: Cases and Cooling | November 22, 2004 - 05:00 PM | Jeremy Hellstrom
A nice spread of cases, with a style that should suit just about anyone looking at getting a snazzier case. Pimprig's look at the warrior is the place to start.
"I was really impressed with the actual construction. Instead of using glue or rivets to attach the mesh and plastic window, they used screws with end caps.
Subject: Cases and Cooling | November 19, 2004 - 11:35 AM | Alex Marsters
What's the real difference between Eastern Block and Western Block? Procooling knows. Also, Polarflo escalates the conflict with an announcement about a new series and 2 more reviews compete for your attention.
"Procooling has been trying to test more European waterblocks lately to provide a clear and fair picture of the designs and technology to our readers.
Subject: Cases and Cooling | November 17, 2004 - 11:48 AM | Jeremy Hellstrom
hi-techreviews puts Scythe's new heatpipe based heatsink to the test, and gives it high marks. Also, the ATake Phantom is a very inexpensive solution for older Socket A/P3 systems you might have running Seti@Home. Plus, if you want to get some more control over your 9800pro, read the article at techpowerup!
"We have reviewed numerous products from Scythe USA in the past and each one of them was somehow unique in its design and the Scythe's new SCKKR-1
Subject: Cases and Cooling | November 15, 2004 - 11:53 AM | Jeremy Hellstrom
Hexus reviews a fairly unadorned, but extremely stylish case from Akasa. For those of you who prefer a little flash at the front, check out the Janus, Samurai or the Dracula, and Coolermaster announces that their CM Stacker line is BTX ready.
"Akasa, while not the original manufacturers of the chassis, have worked with the original creators to tweak it just as they like it, engineering out any initial flaws they saw and paying close attention to the smaller details and the wider coolin
Today we look at two heatsinks from Swiftech that are designed to be high performance-low noise cooling solutions. The MCX64-V comes bundled with a quiet fan while the larger MCX6400-v leaves the fan choice up to the end user.
Subject: Cases and Cooling | November 12, 2004 - 11:46 AM | Jeremy Hellstrom
Big Bruin looks at a watercooling setup from Thermaltake that makes it easier to set up your first watercooled PC and there's three more reviews for those of you looking for a little more from your current setup.
"Thermaltake has really hit the mark with this kit. It has everything you need to easily make the switch from air to liquid cooling for your CPU.
Subject: Cases and Cooling | November 10, 2004 - 11:44 AM | Jeremy Hellstrom
VGA coolers and heatsinks to tame the fire of the prescott, not to mention helping you OC your A64
"Ap0calypse.com takes a look at a new cooler from Cooler Master...only this time the cooler is for your video card! That's right, the people over at Cooler Master have released their first video card cooling solution and we are here to tell you how it performs.
The Hyper 48 HSF is designed to provide high performance cooling, be super quiet, and uses a universal mount that works with Prescott (LGA775), P4 (478), and AMD K8 (754/939/940).
Get notified when we go live!