Subject: Cases and Cooling | August 12, 2005 - 11:58 AM | Jeremy Hellstrom
SystemCooling has a Swiftech MCP655 12 VDC Pump to review, and it does exactly what Swiftech says; it improves on the MCP650. There is a pot on the pump, letting you run it at anywhere between 5 and 14 V, with a simple twist of the wrist.
"In their on going quest for the perfect PC water-cooling pump, Swiftech has recently released the MCP655 12 VDC Pump, which features several key improvements over the ori
Subject: Cases and Cooling | August 10, 2005 - 12:15 PM | Jeremy Hellstrom
Asetek has released a line of Vapochill CPU heatsinks designed to be air cooled, not watercooled. There are 3 models in the series, and Overclockers Online has posted a review of the Ultra Low Noise version. It performs fairly well, and does so nearly silently.
"The addition to the Asetek arsenal is more traditional than a phase change or water cooling system, but still cutting edge in its own right.
Subject: Cases and Cooling | August 8, 2005 - 01:22 PM | Jeremy Hellstrom
Starting off with the full sized systems at the top, and carrying on into SFF enclosures perfect for home theatre use, there are a few recent case reviews to check out. Start with Extreme Overclocking's review of the Antec TX1050B.
"Antec is one of the top most recognized brand names when it comes to high-end PC enclosures. The original Performance Series is undoubtedly the most well-known Antec design, and each new generation since then has been based on this classic chassis.
Subject: Cases and Cooling | August 5, 2005 - 11:47 AM | Jeremy Hellstrom
Asetek has released a 12V Waterchill reservoir and pump, and PimpRig has it for review. While it may not be a top of the line performer, some of the extras that it comes with may influence your decision somewhat.
"Odd shape or not, the reservoir is very precisely mated to the pump body over the inlet to the impeller making for a very clean look. A small tube is modeled into the back of the reservoir to accommodate a LED which is accessible from the underside of the pump.
Subject: Cases and Cooling | August 4, 2005 - 11:43 AM | Jeremy Hellstrom
Your Graphic card's GPU and RAM are probably the 2 hottest components in your case. While it is common to have a fast main processor running at 35-45 C, the GPU is often nearly twice that temperature. Treat the poor card to a Zalman VF700-Cu, not only will the card be cooler, but the fan has a silent setting too. Read the full story at Xtreme Resources.
"Is your video card one of those that is getting very hot and even
Subject: Cases and Cooling | August 3, 2005 - 12:04 PM | Jeremy Hellstrom
Gigabyte seems to produce everything nowadays, and is doing a good job of it to boot. Next on their list is CPU heatsinks, like the G-Power Cooler Pro that is reviewed at ExtensionTech, that will keep your chips cool and good looking. Also included are 2 news releases from Muskin, and some dust proof fans.
"Gigabyte, a name you'd come to think of as a motherboard company, has been diversifying themselves over the last few years.
Subject: Cases and Cooling | August 2, 2005 - 11:57 AM | Jeremy Hellstrom
The Foxconn TP-230 case is steel with a black and silver colour scheme. It features screwless mounting, something many of us have become very used to, as well as a removable motherboard tray. Read the full review at X Bit Labs.
"We would like to offer you a review of a new system case from Foxconn, which appears to be one of the most interesting mainstream solutions out there.
Subject: Cases and Cooling | July 29, 2005 - 12:02 PM | Jeremy Hellstrom
Swiftech is offering up the Storm, a universal CPU waterblock. Not only is it pretty; if paired with a powerful pump, it is also very cool. Read the full review at SystemCooling.
"Swiftech has teamed up with the well-known Australian engineer Stew Forster (aka Cathar) to commercialize one the most innovative and exquisitely executed waterblocks on the market today.
Subject: Cases and Cooling | July 28, 2005 - 01:31 PM | Ryan Shrout
Ever want to see a video of someone making blow holes in their case before you try it on your own? This article over at VIA Arena does just that.
Case cooling is very important to the healthy operation of any PC. John has produced many articles that give blow by blow descriptions of how to provide your case with adequate cooling. One such article is how to insert blow holes (with fans) in a metal case. The end result of that effort was a Star Wars case mod with serious air flow.
Subject: Cases and Cooling | July 28, 2005 - 12:04 PM | Jeremy Hellstrom
There is an amazing amount of choice in the PC case market today. From newer companies just getting into manufacturing them, to companies that have been in the market for years. No matter if you want inexpensive, spacious, wind tunneled or just easily mod-able, you can find it. Coolermaster is a well recognized name, that has been making cases for years.
Get notified when we go live!