Introduction and Features
Earlier this year we took a detailed look at the Silent Base 600 and found it to be a full-featured mid-tower enclosure that focuses on quiet, virtually silent operation, while at the same time delivering excellent cooling performance, usability and support for high-end hardware. Be Quiet! introduced the Silent Base 800 mid-tower case well over a year ago and later released the Silent Base 600 mid-tower case in 2015. The two cases are functionally very similar with only a few minor changes differentiating the two. Because the two cases are so similar, we are going to highlight the Silent Base 800’s features and specifications and then point out the main differences using the Silent Base 600 as a reference.
Be Quiet!’s Silent Base Series currently includes two cases; the Silent Base 800 and the Silent Base 600. As you might expect, the Silent Base Series is designed for very quiet operation while still offering excellent performance and cooling. Both cases are targeted towards users looking to build a quiet high-end gaming or multimedia system.
Silent Base 800 Key Features
The Be Quiet! Silent Base 800 ATX Mid-Tower enclosure comes in four different color schemes (Black/Black, Orange/Black, Silver/Black, and Red/Black) and is available with or without a side window. The Silent Base 800 comes with three Be Quiet! Pure Wings 2 fans (two 140mm intakes and one 120mm exhaust) pre-installed along with numerous options that support additional fans or liquid cooling if desired.
“The Be Quiet! Silent Base 800 offers the perfect symbiosis of noise prevention and cooling performance, good usability, and an extensive capacity for high-end hardware.”
Be Quiet! Silent Base 800 Mid-Tower Case Main Features:
• Mid-Tower ATX enclosure available in four different color schemes (with or without a side window)
• Supports ATX, Micro-ATX and Mini-ITX motherboards
• Innovative construction assures excellent cooling efficiency and air circulation
• Easily removed dust filters on front and bottom panels
• Sound dampening mats used on front panel and both side panels
• Anti-vibration decoupling provided for fans, HDDs and power supply
• Double-glazed side panel window provides superb soundproofing
• Three included Pure Wings fans: (2) 140mm intakes and (1) 120mm exhaust
• Removable top panel, with top fan mounts pre-drilled for 240mm or 280mm fans and/or liquid cooling radiators
• Excellent cooling and low noise levels with up to six fan mounting locations
o Front: two 140mm fans included
o Top: Dual 120mm or 140mm
o Rear: 120mm fan included
o Bottom: 120mm or 140mm
• (2) USB 3.0, (2) USB 2.0 and audio jacks on the top panel
• Seven internal 3.5” hard drive bays
• Four internal 2.5” SSD mounting locations
• Three external 5.25” drive bays
• Tool-free mounting for all 3.5”/2.5” internal drives
• Up to 290mm (11.4”) clearance for graphic cards
• Up to 400mm (15.7”) for long graphic cards (with HDD cage removed)
• Up to 170mm (6.7”) of space for CPU coolers
• 3-Year manufacturer’s warranty
• MSRP: $149.99 USD ($139.99 without side window)
Subject: Cases and Cooling | January 18, 2016 - 12:39 PM | Sebastian Peak
Tagged: small form factor, silent case, SFF, mini-itx, fractal design, enclosure, define s, define nano s, case
Fractal Design has introduced the Define Nano S enclosure; a new, mini-ITX version of their popular Define S mid-tower.
The Fractal Design Define S was our pick for 2015 enclosure of the year (in our year-in-review podcast), and this new mini-ITX version retains the larger enclosure's design aesthetic - and its support for full-size components.
"The Define Nano S is an ITX case that features compatibility with high end, full-size components, superior sound dampening, and an ATX-like layout."
Key features for the Define Nano S from Fractal Design:
- A Define Series ITX case designed for silent computing with sound dampening and ModuVent™ technology
- User-friendly construction with superior cable management and compatibility for full-size components
- Flexible storage options with room for up to 4 drives
- Accommodates a variety of radiator sizes and includes brackets for reservoir and pump mounting
- Features two Dynamic Series fans — 1 GP-12 and 1 GP-14 — with an adapter included for motherboards with limited fan headers
- Featuring an open interior allowing an unobstructed airflow path from the front of the case to the rear exhaust
- Easy-to-clean filters on the top and bottom, spanning the PSU position, with the bottom filter ejecting from the front for easy-access.
The Define Nano S offers a great deal of room for a mini-ITX enclosure (the Nano S is approximately 13.5 inches high, 8 inches wide, and 16.2 inches deep), with support for up to a 240/280 mm radiator on both top and front fan mounts, with 6 fan mounts overall (two of Fractal's Dynamic Series fans - 120 mm and 140 mm - are included). And an important detail; both the bottom and front fan mounts feature removable dust filters.
The enclosure offers the same "ModuVent" removable top vents, allowing more silent operation if the user doesn't need to use the upper fan mounts. There is sound dampening in place throughout, allowing for a quiet build. Storage mounts are behind the rear panel (as in the Define S) supporting two each 3.5-inch and 2.5-inch drives. GPUs up to 315 mm and CPU coolers up to 160 mm are supported along with ATX PSUs up to 160 mm deep.
Pricing will be $64.99 for the standard version, and $69.99 for the version with a window. Availability is set for March 2016.
You can check out the full specs for this new enclosure after the break.
Subject: Cases and Cooling | January 14, 2016 - 03:44 PM | Jeremy Hellstrom
Tagged: modular psu, firepower 750W, fatal1ty, 80 Plus Gold
Bear with us on this one as there is a long strange story behind the new PSU maker which calls themselves Firepower. A long time ago was PSU maker that ruled the roost who called themselves PC Power & Cooling, charging a premium over the competition but being worth every penny. As the markets changed PCP&P found themselves lagging and so an apparently successful company called OCZ purchased them wholesale and begat their own line of PSUs. Sadly all was not as it seemed at OCZ, the deals they offered were indeed too good to be true and to survive they had to amputate some portions of themselves and sell them. The PSU portion, including the patents, was sold in 2014 to a new company which called themselves Firepower Technology and so we come to the FirePower Fatal1ty 750W.
This PSU is rated as a 80 Plus Gold model with a 5 year warranty which speaks to the confidence of Firepower. It uses a single 12V rail capable of delivering 62.5A and the modular cables include four 6+2 PCIe, six Molex , and eight SATA connectors, enough to power a dual GPU system. [H]ard|OCP cracked the PSU open and found it to be the same design as a SilverStone ST75F-GS V2 with a mix of components, none of which stood out as being top of the line. In the end the design was good enough to pass every test [H] threw at it but with a relatively high price it did not come off with an award.
"The Fatal1ty Series PSUs by Firepower Technology may seem to be something new in the world of computer power supplies, but really it is not. That said, Firepower is somewhat new in the PSU world, so let's see where they are headed right now."
Here are some more Cases & Cooling reviews from around the web:
- Thermaltake DPS G 1050W Platinum @ [H]ard|OCP
- DeepCool DQ750 ST PSU @ Kitguru
- FSP Hydro G Series 750 W @ techPowerUp
Subject: Cases and Cooling | January 14, 2016 - 01:59 PM | Sebastian Peak
Tagged: bitfenix, case fan, cpu fan, static pressure, air cooling, Spectre Xtreme
BitFenix has introduced a line of Spectre dual-frame fans based on the Pro series with their new Xtreme high static pressure fans. These are made with CPU cooling in mind, and are available in both black (without LEDs) and multiple color LED options.
The Spectre Xtreme fans operate from 950 - 2000 RPM with newly-designed fan blades for airflow up to 66 CFM with "optimum static pressure", making them "an ideal choice for liquid cooling solutions". The fans use fluid dynamic bearings for reduced noise levels, as well as increased efficiency and life expectancy, according to BitFenix.
"With the introduction of dual frame design of the BitFenix Spectre Pro series we raised the standards of system fans to a new level. The new BitFenix Spectre Xtreme fans offer many features redefining the standards of cooling fans. Spectre Xtreme gives you the best performance and aesthetics using the latest in cooling fan technology and innovative designs.
Cooling fans used in liquid cooling systems not only need to have a high airflow but also they need to be optimized for static pressure. The newly designed blades of the Spectre Xtreme not only look good but also improve the airflow of the fan to 66CFM while maintaining optimum static pressure. This makes the Spectre Xtreme fans an ideal choice for liquid cooling solutions."
In addition to black, the LED versions are available in white, blue, red, and a green color which BitFenix has taken “special care…to match the Green LED with the light emitted from NVIDIA GeForce GTX stock coolers”.
Subject: Cases and Cooling | January 13, 2016 - 12:11 PM | Sebastian Peak
Tagged: water cooling, recall, Predator 360, predator 240, liquid CPU cooler, EKWB, ek, AIO
EKWB has issued a recall for all first-generation Predator 240 and 360 liquid CPU coolers due to risk of leakage. A new version (v1.1) of both self-contained coolers has been introduced to address the issue, and EK will provide one of the new units for those seeking a replacement.
Visual differences between Revision 1.0 (left) and Revision 1.1 (right) (via EKWB)
EKWB is also taking responsibility for any component damage that may have resulted from any leaks, offering refunds for defective units (if a replacement is not desired) and affected components.
"All Revision 1.0 units produced from October 2015 until end of December 2015 are potentially affected by the risk of leakage and in order to prevent any computer component damage, the units need to be replaced. The leakage may occur between copper cold plate and bracket on the water block after it is heated up and pressure rises. Current statistics show that 1 out of 10 units leaks.
We are warning all customers of EK XLC-Predator units to discontinue use of cooling device and contact EKWB for replacement unit or refund. EKWB is taking full responsibility for this issue and will be:
- Replacing or refunding all returned units to the customers
- Refunding the customer any computer component damage created by a leakage
EKWB has redesigned and released a new version of EK-XLC Predator (Revision 1.1) on the 4th of January 2016 that prevents any leakage under normal working modes. All customers with Revision 1.0 units will be offered a replacement R1.1 unit or a full refund. Revision 1.0 backplate is not compatible with Revision 1.1 backplate!"
Subject: Cases and Cooling | January 12, 2016 - 02:20 PM | Sebastian Peak
Tagged: small form factor, Silverstone, SFF case, mini-stx, Intel 5x5, enclosure, CES 2016, CES
SilverStone had an early enclosure on display at CES for the upcoming Mini-STX standard, the tiny form-factor introduced with Intel's "5x5" motherboard (which we first reported on almost exactly one year ago).
The simple black metal enclosure (as yet unnamed) looked and felt like a production unit, but we are still in the early stages with the first mini-STX motherboards being announced only this week. No details were given on when it would be available for purchase, or exactly how much it will cost.
It is interesting to note the enclosure's I/O, which should indicate the standard for the new motherboards. On the front panel we had openings for a standard USB and Type-C port, and 3.5 mm audio; around back there were two more USB ports, LAN, DisplayPort, and HDMI. To the left of the HDMI port you can see the power input for the external power supply, as mini-STX will have a lot in common with the thin mini-ITX standard. (Thin mini-ITX optionally supported internal PSUs, but given the space constraints it looks like the mini-STX boards will be using a laptop style power supply.)
The tiny Mini-STX enclosure fits easily in one hand
We will await any official announcement of this (and any other) upcoming mini-STX enclosure from SilverStone.
Subject: Cases and Cooling | January 11, 2016 - 05:17 PM | Sebastian Peak
Tagged: workstation, standing desk, Lian Li, enclosure, DK-04, desk chassis, CES 2016, CES, aluminum case
Lian Li has introduced a new electronic sit/stand desk chassis, the DK-04, which holds a full system under its tempered glass surface and raises and lowers at the push of a button.
On display at their booth at CES last week, the DK-04 offers a compelling option for someone interested in a standing workstation, with the added benefit of housing a powerful custom rig (and looking really cool in the process).
There is room under the glass desktop (this model does not use a drawer) for up to an ATX motherboard with one dual-slot expansion card, which can be used with a GPU up to 320 mm in length. CPU coolers of up to 120 mm are supported, along with 120 mm width radiators up to 480 mm long.
The front panel offers 4x USB 3.0 ports, RGB lighting controls, and a 5.25-inch optical drive bay; and there is internal storage support for up to 8x 3.5-inch or 2.5-inch hard drives. The entire unit is 47.24 inches wide, 29.53 inches deep, and can be adjusted from approximately 30 - 46 inches in height.
The control panel for the electric height adjustment includes the option for up to 4 presets, allowing the desk to easily adjust to various pre-defined seated and standing positions.
Pricing and availability have yet to be announced, but expect this to come in higher than IKEA's popular solution (which doesn't offer a the functionality of a full PC enclosure inside, of course).
Introduction and Features
As you might expect, be quiet! is focused on virtually silent power supplies and they continue to be one of the top selling brands in Europe. The Dark Power Pro 11 Series occupies the top tier in be quiets!’s PC power supply lineup. All of the Dark Power Pro 11 models are certified for high efficiency (80 Plus Platinum) and come with modular cables. In this review we will be taking a detailed look at the be quiet! Dark Power Pro 11 1,000W power supply with Cable Management. There are six power supplies in the Dark Power Pro 11 CM Series, which include 550W, 650W, 750W, 850W, 1000W and 1200W models.
be quiet! designed the Dark Power Pro 11 CM Series to provide high efficiency with minimal noise for systems that demand whisper-quiet operation without compromising on power quality. In addition to the Dark Power Pro 11 Series, be quiet! offers a full range of power supplies in ATX, SFX, and TFX form factors.
(Courtesy of be quiet!)
All of the Dark Power Pro 11 Cable Management Series power supplies are semi-modular (all cables are modular except for the fixed 24-pin ATX cable). Along with 80 Plus Platinum certified high efficiency and quiet operation, the Dark Power Pro 11 1,000W modular power supply features an overclocking key to select between multi-rail and single rail +12V outputs. The power supply uses be quiet!’s latest SilentWings3 135mm fan for virtually silent operation. The fan speed starts out very slow and remains slow and quiet through mid power levels. And the Dark Power Pro 11 power supplies allow connecting up to four case fans, whose speed will be controlled by the PSU.
be quiet! Dark Power Pro 11 1,000W CM PSU Key Features:
• 1,000W continuous DC output (ATX12V v2.4, EPS 2.92 compliant)
• Virtually inaudible SilentWings3 135mm cooling fan
• 80 PLUS Platinum certified efficiency (up to 94%)
• Premium 105°C rated parts enhance stability and reliability
• Powerful GPU support with nine PCI-E connectors
• User-friendly cable management reduces clutter and improves airflow
• NVIDIA SLI Ready and AMD CrossFire X certified
• ErP 2014 ready and meets Energy Star 6.0 guidelines
• Zero load design supports Intel’s Deep Power Down C6 & C7 modes
• Fully Intel Haswell compatible
• Active Power Factor correction (0.99) with Universal AC input
• German product conception, design and quality control
• Safety Protections : OCP, OVP, UVP, SCP, OTP, and OPP
• 5-Year warranty
• MSRP for the Dark Power Pro 11 1,000W CM PSU: $239.00 USD
Subject: Cases and Cooling | January 10, 2016 - 01:02 PM | Sebastian Peak
Tagged: Silverstone, NAS, mini-itx, enclosure, CS380, CS280, CES 2016, CES, case, atx case
SilverStone had a pair of CS Series enclosures on display at CES this year, with both ATX and Mini-ITX form-factors covered with these storage-oriented designs.
Beginning with the larger CS380, an enclosure that had previously been shown at Computex in a Micro-ATX form-factor. This slightly modified final version now supports a standard ATX motherboard for additional build flexibility, but this enclosure is really all about the hard drives. With eight 3.5-inch HDD trays up front (along with a pair of 5.25-inch bays that can each be replaced with hot-swap HDD trays, sold separately), there is plenty of storage space for a NAS or storage server build.
Inside, a pair of 120 mm fans keep the hard drives cool, and while the bare metal interior looks plain by modern standards these CS Series enclosures were build with enterprise standards in mind. The rest of the interior is pretty standard for an ATX enclosure, with a bottom PSU placement, 120 mm rear fan, and 7 expansion slots.
The smaller of the two storage enclosures, the CS280, is a mini-ITX design that scales storage support down to 2.5-inch drives.
Offering 8 HDD/SSD trays and supporting standard mini-ITX motherboards with up to a 2-bay, full-height expansion card, the CS280 provides a lot of build flexibility. While it would make a very compact storage server or hold a tremendous amount of SSD storage for a high-speed NAS, the CS280 could also house a compact, high-power gaming rig with a GPU like AMD's R9 Nano - if you desired this much storage support, that is.
Panels in the front of both cases allow view of HDD activity lights
The two enclosures differ beyond size as the CS380 has a plastic front panel/door, and the smaller CS280 features a brushed aluminum front panel and a more rounded appearance. These enclosures will be priced a little higher than typical consumer drives given their construction and purpose, but we will await final retail pricing (and availability) to see where they fit in the market.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Cases and Cooling | January 9, 2016 - 02:27 PM | Sebastian Peak
Tagged: tempered glass, In Win 509, in win, full tower, enclosure, CES 2016, CES, case
Among the enclosures in the colorful In Win booth at CES was the 509, a new steel and tempered glass full-tower design.
(Left to right:) In Win 805 concept, 909, and new 509 full tower
The 509 is another striking design that looked particularly good with RGB lighting shown, and offers these features according to In Win:
- Tempered Glass Front and Side Panels
- Supports Versatile Cooling Options
- User Friendly Installation
- Excellent Expandability and Optimized Gaming Performance
- Form-Factor: Full Tower
- Material: SECC, Tempered Glass
- Motherboard: E-ATX /ATX/ Micro-ATX (Max: 12" x 13")
- Expansion Slots: 8
- Supports graphic card length up to 370mm, height up to 186mm
- Storage Support:
- External 5.25” x1
- Internal 3.5” / 2.5" x5, 2.5" x2
- Air Cooling Support:
- Front: 120/140mm Fan x3
- Vertical: 120/140mm Fan x2
- Rear: 120/140mm Fan x1
- Side: 120/140mm Fan x1
- Bottom: 120/140mm Fan x 1
- Water Cooling:
- Front: 360/280mm Radiator (HDD bracket must be repositioned)
- Vertical: 280/240mm Radiator (HDD bracket must be repositioned)
- CPU Cooler: Supports at least 184 mm in height
- PSU Support: ATX 12V, PSII Size and EPS up to 230mm (215mm with Bottom Fan)
- Front I/O: USB 3.0 x2, USB 2.0 x2, HD Audio
No specifics on pricing or availability just yet.
Follow all of our coverage of the show at http://pcper.com/ces!