All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Introduction and Features
Today we are going from one extreme to another. Two months ago we took an in-depth look at Cooler Master’s Elite 110 enclosure, which is a compact small form-factor case designed to house a mini-ITX system. Now we are going to the opposite end of the spectrum and will be taking a detailed look at the largest case Cooler Master (or most anyone else for that matter) has released to date, the HAF Stacker 935 Modular-Tower Case. In addition, the good folks at Cooler Master sent along a HAF Stacker 915F to show off how easy it is to expand a HAF Stacker system by adding one or more HAF Stacker case modules.
(Courtesy of Cooler Master)
Because this case is so large (we will actually be reviewing three different cases together: HAF 915F, 925 mid, and 915R) we are going to split the review into two parts. In Part 1 we are taking a detailed look at the three chassis (features, specifications, etc.) and the in Part 2 we will start installing parts and build a full-size ATX system along with a mini-ITX system and also look at various cooling solutions.
CM HAF Stacker 935 (HAF 925/HAF 915R) (3) HAF 915s Stacked
The Cooler Master HAF Stacker 935 case consists of two pieces: a HAF 925 Mid-Tower enclosure and a HAF 915R mini-ITX case stacked together. The HAF 935 comes with the 915 mini-ITX chassis mounted on top of the HAF 925 Mid-Tower case but you can swap them around if you like because all of the HAF Stacker Series cases are interchangeable. This offers great flexibility for building multi-PCs in one chassis and provides a large amount of room for mounting all sorts of components like high-end water cooling systems, huge HDD arrays, etc. The HAF Stacker series can provide an excellent base system for some extreme case modding if desired.
Introduction, Specifications and Packaging
You might have never heard of Angelbird - until now, that is. Angelbird Technologies GmbH is an SSD maker based out of Vorarlberg, Austria. Their product lines have historically focused around high end and Mac-based products, with a recent arch into portable SSDs (like their SSD2go line). Angelbird is known for their high build quality, and their products are assembled using a technique I can appreciate - vapor phase soldering - (seen here) a technique that puts the least possible thermal stress on the components, as well as ensuring all solder joints are oxygen free. While the vast majority of the their prior products have been build around SandForce controllers, today they have launched a new line, the SSD wrk:
The Angelbird SSD wrk is built around a new (to them) controller, the SM2246EN from Silicon Motion:
Silicon Motion prides themselves on making SSD controllers that deliver good performance at very low power consumption. For those wanting more detail on this particular controller technology, we have a detailed analysis from last August, available at this page.
It's so cool, and so tiny
Corsair continues to march down the path of making a PC case for just about every user imaginable. At Computex this past June, Corsair announced the Carbide Air 240 case, which is a smaller version of the very popular (and well reviewed) Carbide Air 540. These unique cases include two separate compartments: one for the motherboard, CPU, and graphics card and another for the power supply, storage, and miscellaneous cable clutter. The result is a sleek cube-shaped form factor that is easy to build inside.
Available in both black and white (with UV resistant paint), the $89/99 case fits both Mini-ITX and Micro-ATX motherboards allowing quite a bit of component flexibility.
A quick look at the front of the case shows the cube-like shape that both the Air 540 and Air 240 share, a form factor resulting from the dual-compartment design. The Corsair logo in the center can actually be rotated depending on the orientation of the case which itself can be rotated to allow the windowed case door to be the top of the case rather than the side.
The notebook market of today barely resembles the notebook market of 5 years ago. People are spending less money on their computers than ever before, and we find even sub $1000 options are adequate for casual 1080p gaming. However the high-end, boutique gaming notebook hasn’t been forgotten. Companies like Maingear still forge on to try to provide a no compromise portable gaming experience. Today, we look at the Maingear Pulse 17 gaming laptop.
The most striking feature of the Pulse 17 is the namesake 17-in display. While we are used to seeing gaming laptops fall in the 15-in or higher range, there is something to be said about opening up the Pulse and being greeted by a massive display with 1080p resolution. The choice of a 17-in display here also enables one of the most impressive parts of this notebook, the thickness.
When most people think about gaming laptops, their minds go to the gigantic bricks of the past, The Pulse 17 manages to provide gaming power in a similar thickness to the average ultrabook at 0.86”. In fact, the form factor is similar to what I’d imagine a 17” MacBook Pro Retina as, if Apple decided to use a display that large.
Even though the screen size creates a large footprint for the Pulse 17, both the thickness, and the 6lb weight make this the first truly portable gaming laptop I have used.
Comparing the physical form of the Pulse 17 to a notebook like the ASUS G750JX, which we reviewed late last year, is almost comical. The G750 weighs in at 10lbs and just under 2” thick while toting similar hardware and performance to the Pulse 17.
Top: Maingear Pulse 17, Bottom: ASUS G750JX
Beyond physical attributes, the Pulse 17 has a lot to offer from a hardware standpoint. The Intel Core i7-4700HQ processor and NVIDIA GTX 765M GPU (as tested, it now ships with a 870M) mean that you’ll have all that you need to play any modern game on the integrated 1080p display.
Storage is provided by a 1TB Hard Drive, as well as 2x128GB mSATA SSDs in SuperRAID 0 to provide maximum throughput.
Introduction, Specifications and Packaging
OCZ is on what I would consider to be an upswing now that it exists under the relative safety of its parent company, Toshiba. Shortly after they were acquired, OCZ cut a bunch of unnecessary and/or redundant SKUs from their inventory and simultaneously began the transition of all of their product lines to exclusively use Toshiba branded flash. It only makes sense, given that flash is now available in-house - a luxury OCZ had wanted to have for quite some time. The changeover so far has refreshed the Vector 150, Vertex 460, and most recently the RevoDrive 350. Today OCZ has made another change, but instead of refreshing an old product, they are introducing a new one:
Behold the ARC 100!
To those wondering why OCZ needs another model SSD, and where that model will fall in their lineup, here's everything you need to see:
...so we have a slightly de-rated SSD, with the same Indilinx Barefoot controller, and the same Toshiba 19nm flash, but with a *significantly* reduced price. I wouldn't sweat the 20GB/day rating, as the vast majority of users will average far less than that daily when that usage is spread over a multi-year period. Even heavy gamers that blow through 100+GB of writes on an initial system and game install will still average far less than that over the subsequent months and years. Here is a look at the complete OCZ product spectrum, including their business and PCIe offerings:
OK, so they've got my attention with this price thing, so lets see how well the ARC performs given its lower cost:
Coming in 2014: Intel Core M
The era of Broadwell begins in late 2014 and based on what Intel has disclosed to us today, the processor architecture appears to be impressive in nearly every aspect. Coming off the success of the Haswell design in 2013 built on 22nm, the Broadwell-Y architecture will not only be the first to market with a new microarchitecture, but will be the flagship product on Intel’s new 14nm tri-gate process technology.
The Intel Core M processor, as Broadwell-Y has been dubbed, includes impressive technological improvements over previous low power Intel processors that result in lower power, thinner form factors, and longer battery life designs. Broadwell-Y will stretch into even lower TDPs enabling 9mm or small fanless designs that maintain current battery lifespans. A new 2nd generation FIVR with modified power delivery design allows for even thinner packaging and a wider range of dynamic frequencies than before. And of course, along with the shift comes an updated converged core design and improved graphics performance.
All of these changes are in service to what Intel claims is a re-invention of the notebook. Compared to 2010 when the company introduced the original Intel Core processor, thus redirecting Intel’s direction almost completely, Intel Core M and the Broadwell-Y changes will allow for some dramatic platform changes.
Notebook thickness will go from 26mm (~1.02 inches) down to a small as 7mm (~0.27 inches) as Intel has proven with its Llama Mountain reference platform. Reductions in total thermal dissipation of 4x while improving core performance by 2x and graphics performance by 7x are something no other company has been able to do over the same time span. And in the end, one of the most important features for the consumer, is getting double the useful battery life with a smaller (and lighter) battery required for it.
But these kinds of advancements just don’t happen by chance – ask any other semiconductor company that is either trying to keep ahead of or catch up to Intel. It takes countless engineers and endless hours to build a platform like this. Today Intel is sharing some key details on how it was able to make this jump including the move to a 14nm FinFET / tri-gate transistor technology and impressive packaging and core design changes to the Broadwell architecture.
Intel 14nm Technology Advancement
Intel consistently creates and builds the most impressive manufacturing and production processes in the world and it has helped it maintain a market leadership over rivals in the CPU space. It is also one of the key tenants that Intel hopes will help them deliver on the world of mobile including tablets and smartphones. At the 22nm node Intel was the first offer 3D transistors, what they called tri-gate and others refer to as FinFET. By focusing on power consumption rather than top level performance Intel was able to build the Haswell design (as well as Silvermont for the Atom line) with impressive performance and power scaling, allowing thinner and less power hungry designs than with previous generations. Some enthusiasts might think that Intel has done this at the expense of high performance components, and there is some truth to that. But Intel believes that by committing to this space it builds the best future for the company.
The Waiting Game
NVIDIA G-Sync was announced at a media event held in Montreal way back in October, and promised to revolutionize the way the display and graphics card worked together to present images on the screen. It was designed to remove hitching, stutter, and tearing -- almost completely. Since that fateful day in October of 2013, we have been waiting. Patiently waiting. We were waiting for NVIDIA and its partners to actually release a monitor that utilizes the technology and that can, you know, be purchased.
In December of 2013 we took a look at the ASUS VG248QE monitor, the display for which NVIDIA released a mod kit to allow users that already had this monitor to upgrade to G-Sync compatibility. It worked, and I even came away impressed. I noted in my conclusion that, “there isn't a single doubt that I want a G-Sync monitor on my desk” and, “my short time with the NVIDIA G-Sync prototype display has been truly impressive…”. That was nearly 7 months ago and I don’t think anyone at that time really believed it would be THIS LONG before the real monitors began to show in the hands of gamers around the world.
Since NVIDIA’s October announcement, AMD has been on a marketing path with a technology they call “FreeSync” that claims to be a cheaper, standards-based alternative to NVIDIA G-Sync. They first previewed the idea of FreeSync on a notebook device during CES in January and then showed off a prototype monitor in June during Computex. Even more recently, AMD has posted a public FAQ that gives more details on the FreeSync technology and how it differs from NVIDIA’s creation; it has raised something of a stir with its claims on performance and cost advantages.
That doesn’t change the product that we are reviewing today of course. The ASUS ROG Swift PG278Q 27-in WQHD display with a 144 Hz refresh rate is truly an awesome monitor. What did change is the landscape, from NVIDIA's original announcement until now.
Filling the Product Gaps
In the first several years of my PCPer employment, I typically handled most of the AMD CPU refreshes. These were rather standard affairs that involved small jumps in clockspeed and performance. These happened every 6 to 8 months, with the bigger architectural shifts happening some years apart. We are finally seeing a new refresh of the AMD APU parts after the initial release of Kaveri to the world at the beginning of this year. This update is different. Unlike previous years, there are no faster parts than the already available A10-7850K.
This refresh deals with fleshing out the rest of the Kaveri lineup with products that address different TDPs, markets, and prices. The A10-7850K is still the king when it comes to performance on the FM2+ socket (as long as users do not pay attention to the faster CPU performance of the A10-6800K). The initial launch in January also featured another part that never became available until now; the A8-7600 was supposed to be available some months ago, but is only making it to market now. The 7600 part was unique in that it had a configurable TDP that went from 65 watts down to 45 watts. The 7850K on the other hand was configurable from 95 watts down to 65 watts.
So what are we seeing today? AMD is releasing three parts to address the lower power markets that AMD hopes to expand their reach into. The A8-7600 was again detailed back in January, but never released until recently. The other two parts are brand new. The A10-7800 is a 65 watt TDP part with a cTDP that goes down to 45 watts. The other new chip is the A6-7600K which is unlocked, has a configurable TDP, and looks to compete directly with Intel’s recently released 20 year Anniversary Pentium G3258.
Experience with Silent Design
In the time periods between major GPU releases, companies like ASUS have the ability to really dig down and engineer truly unique products. With the expanded time between major GPU releases, from either NVIDIA or AMD, these products have continued evolving to offer better features and experiences than any graphics card before them. The ASUS Strix GTX 780 is exactly one of those solutions – taking a GTX 780 GPU that was originally released in May of last year and twisting it into a new design that offers better cooling, better power and lower noise levels.
ASUS intended, with the Strix GTX 780, to create a card that is perfect for high end PC gamers, without crossing into the realm of bank-breaking prices. They chose to go with the GeForce GTX 780 GPU from NVIDIA at a significant price drop from the GTX 780 Ti, with only a modest performance drop. They double the reference memory capacity from 3GB to 6GB of GDDR5, to assuage any buyer’s thoughts that 3GB wasn’t enough for multi-screen Surround gaming or 4K gaming. And they change the cooling solution to offer a near silent operation mode when used in “low impact” gaming titles.
The ASUS Strix GTX 780 Graphics Card
The ASUS Strix GTX 780 card is a pretty large beast, both in physical size and in performance. The cooler is a slightly modified version of the very popular DirectCU II thermal design used in many of the custom built ASUS graphics cards. It has a heat dissipation area more than twice that of the reference NVIDIA cooler and uses larger fans that allow them to spin slower (and quieter) at the improved cooling capacity.
Out of the box, the ASUS Strix GTX 780 will run at 889 MHz base clock and 941 MHz Boost clock, a fairly modest increase over the 863/900 MHz rates of the reference card. Obviously with much better cooling and a lot of work being done on the PCB of this custom design, users will have a lot of headroom to overclock on their own, but I continue to implore companies like ASUS and MSI to up the ante out of the box! One area where ASUS does impress is with the memory – the Strix card features a full 6GB of GDDR5 running 6.0 GHz, twice the capacity of the reference GTX 780 (and even GTX 780 Ti) cards. If you had any concerns about Surround or 4K gaming, know that memory capacity will not be a problem. (Though raw compute power may still be.)
The Thecus N2560 is a dual-bay NAS Server powered by an Intel Atom SoC. With the addition of HDMI output could this be the answer for some basic HTPC needs as well?
The Thecus N2560 at work in the living room
The N2560 is similar in some ways to the Thecus N2310 NAS we looked at a couple of months ago, but it builds on both the functionality and power of that unit. Both are 2-bay designs with support for up to 8TB of storage via dual 4TB hard drives, and they run the same OS (ThecusOS 6). There are some very big differences, too. The N2560 boasts an Intel Atom SoC which provides dual 1.60 GHz cores, compared to the N2310’s single 800 MHz PowerPC core. The N2560 also features a full-size HDMI output as well as SPDIF digital audio output, making it a potential alternative for some HTPC tasks.
The Thecus N2560 is an attractive-looking device, with the smooth lines and finish of a more expensive product. But beyond the N2560's appearance and basic function as a NAS, this is really a server. Digital audio and video output is certainly an impressive addition for a device that retails for around $180, making it a compelling budget HTPC option if the OS and media software work well. Since the basics of the Thecus OS and NAS usage were covered with the N2310, the media output potential of the N2560 is the area of focus for this review.
Optical + Accelerometer
When I met with Logitech while setting up for our Hardware Workshop at Quakecon this year, they wanted to show me a new mouse they were coming out with. Of course I was interested, but to be honest, mice have seemingly gone to a point where I could very rarely tell them apart in terms of performance. Logitech promised me this would be different. The catch? The G402 Hyperion Fury includes not just an optical sensor but an accelerometer and gyro combo.
Pretty much all mice today use optical sensors to generate data. The sensors are, basically, taking hundreds or thousands of photos of the surface of your desk or mouse and compare them to each other to measure how far and how fast you have moved your mouse. Your PC then takes that data from the mouse at a USB polling rate, up to 1000 Hz with this mouse, and translates it into mouse movement on your desktop and in games.
There is an issue though - at very high speeds of mouse movement, the optical sensor can fail. It essentially loses track of where it is on the surface and can no longer provide accurate data back to the system. At this point, depending on the design of the mouse and driver, the mouse may just stop sending data all together or just attempt to "guess" for a short period of time. Clearly that's not ideal and means that gamers (or any user for that matter) is getting inaccurate measurements. Boo.
To be quite honest though, that doesn't happen with modern mice at your standard speeds, or even standard "fast" gaming motions. According to Logitech, the optical sensor will start to lose tracking somewhere in the 150-180 IPS, or inches per second. That's quite a lot. More precisely that is 3.8 meters per second or 8.5 miles per hour.
Introduction and Features
Seasonic is a well known and highly respected OEM that produces some of the best PC power supplies on the market today. In addition to supplying power supplies to many big-name companies who re-brand the units with their own name, Seasonic also sells a full line of power supplies under the Seasonic name. The new XM2-1250 is the latest addition to the X-Series and features an improved Hybrid Fan control circuit and upgraded copper conduction bars on the main PCB, which together increase efficiency and performance.
The new XM2-1250 is a second generation X-Series power supply that comes with fully modular cables and a 120mm Sanyo Denki cooling fan. It is designed to provide ultra-tight voltage regulation along with high efficiency (80 Plus Gold certified).
Seasonic X-Series XM2-1250 Special Features
Ultra Tight Voltage Regulation Improved load voltage regulation keeps the voltage fluctuations on the 12V output within +2% and -0% (no negative tolerance), and on the 3.3V and 5V outputs between +1% and -1%, which (under 80 Plus load conditions) results in smooth and stable operation.
Seasonic Hybrid Silent Fan Control The industry first, advanced three-phased thermal control balances between silence and cooling. The Hybrid Silent Fan Control provides three operational stages: Fanless, Silent and Cooling Mode. In addition, a selector switch is provided to allow for manual selection between the Seasonic S2FC (fan control without Fanless Mode) or S3FC (fan control including Fanless Mode).
Reduced Cooling Fan Hysteresis is achieved by a new fan control IC, which optimizes how frequently the fan switches on and off. At 25°C ambient temperature the fan turns on when the load rises above 30% (±5%) and turns off when the load drops below 20% % (±5%). Due to this lag in response the fan switches on and off less frequently, which reduces power loss in Fanless and Silent Mode.
Dual Copper Conduction Bars on the power supply PCB help reduce impedance and minimize voltage drop, which further improves efficiency and performance.
80Plus Gold The XM2-1250 power supply is certified in accordance to the 80PLUS organization's Gold standards, offering performance and energy savings with up to =90% efficiency and a true power factor of greater than 0.9 PF.
Full Modular Design (DC to DC) The Seasonic X-Series power supplies feature an integrated DC connector panel with onboard VRM (Voltage Regulator Module) that enables not only near perfect DC-to-DC conversion with reduction of current loss/impedance and increase of efficiency but also a fully modular DC cabling that enables maximum flexibility of integration and forward compatibility.
Seasonic XM2-1250 PSU Key Features:
• High efficiency, 80Plus Gold certified
• 7-Year manufacturer's warranty worldwide
• Fully Modular Cable design with flat ribbon-style cables
• Seasonic DC Connector Panel with integrated VRMs
• Hybrid Silent Fan Control (3 modes of operation: Fanless, Silent and Cooling)
• High-quality Sanyo Denki San Ace dual ball bearing fan with PWM
• Ultra-tight voltage regulation (+2% and -0% +12V rail)
• Dual copper conduction bars on PCB for improved efficiency and performance
• Supports multi-GPU technologies
• Conductive polymer aluminum solid capacitors
• High reliability 105°C Japanese made electrolytic capacitors
• ErP Lot 6 2013 compliant and Intel Haswell processor ready
• PCI-E 8/6 pin x 10, EPS12V/ATX12V x 2, SATA x 14, 4-pin Molex x 5, FDD x 1
• High current Gold plated terminals with Easy Swap connectors
• Active PFC (0.99 PF typical) with Universal AC input
A Tablet and Controller Worth Using
An interesting thing happened a couple of weeks back, while I was standing on stage at our annual PC Perspective Hardware Workshop during Quakecon in Dallas, TX. When NVIDIA offered up a SHIELD (now called the SHIELD Portable) for raffle, the audience cheered. And not just a little bit, but more than they did for nearly any other hardware offered up during the show. That included motherboards, graphics card, monitors, even complete systems. It kind of took me aback - NVIDIA SHIELD was a popular brand, a name that was recognized, and apparently, a product that people wanted to own. You might not have guessed that based on the sales numbers that SHIELD has put forward though. Even though it appeared to have a significant mind share, market share was something that was lacking.
Today though, NVIDIA prepares the second product in the SHIELD lineup, the SHIELD Tablet, a device the company hopes improves on the idea of SHIELD to encourage other users to sign on. It's a tablet (not a tablet with a controller attached), it has a more powerful SoC that can utilize different APIs for unique games, it can be more easily used in a 10-ft console mode and the SHIELD specific features like Game Stream are included and enhanced.
The question of course though is easy to put forward: should you buy one? Let's explore.
The NVIDIA SHIELD Tablet
At first glance, the NVIDIA SHIELD Tablet looks like a tablet. That actually isn't a negative selling point though, as the SHIELD Tablet can and does act like a high end tablet in nearly every way: performance, function, looks. We originally went over the entirety of the tablet's specifications in our first preview last week but much of it bears repeating for this review.
The SHIELD Tablet is built around the NVIDIA Tegra K1 SoC, the first mobile silicon to implement the Kepler graphics architecture. That feature alone makes this tablet impressive because it offers graphics performance not seen in a form factor like this before. CPU performance is also improved over the Tegra 4 processor, but the graphics portion of the die sees the largest performance jump easily.
A 1920x1200 resolution 7.9-in IPS screen faces the user and brings the option of full 1080p content lacking with the first SHIELD portable. The screen is bright and crisp, easily viewable in bring lighting for gaming or use in lots of environments. Though the Xiaomi Mi Pad 7.9 had a 2048x1536 resolution screen, the form factor of the SHIELD Tablet is much more in line with what NVIDIA built with the Tegra Note 7.
Introduction and Design
The next candidate in our barrage of ThinkPad reviews is the ThinkPad Yoga, which, at first glance, might seem a little bit redundant. After all, we’ve already got three current-gen Yoga models to choose from between the Yoga 2 11- and 13-inch iterations and the Yoga 2 Pro top-end selection. What could possibly be missing?
Well, in fact, as is often the case when choosing between well-conceived notebook models, it isn’t so much about what’s missing as it is priorities. Whereas the consumer-grade Yoga models all place portability, slimness, and aesthetics in the highest regard, the ThinkPad Yoga subscribes to a much more practical business-oriented approach, which (nearly) always instead favors function over form. It’s a conversation we’ve had here at PC Perspective a thousand times before, but yet again, it is the core ThinkPad philosophy which separates the ThinkPad Yoga from other notebooks of its type. Suffice it to say, in fact, that really the only reason to think of it as a Yoga at all is the unique hinge design and affiliated notebook/tablet convertibility; excepting that, this seems much closer to an X240 than anything in Lenovo’s current consumer-grade lineup. And carrying a currently-configurable street price of around $1,595 currently, it’s positioned as such, too.
But it isn’t beyond reproach. Some of the same questionable decisions regarding design changes which we’ve covered in our recent ThinkPad reviews still apply to the Yoga. For instance, the much-maligned clickpad is back, bringing with it vivid nightmares of pointer jumpiness and click fatigue that were easily the biggest complaint about the T440s and X240 we recently reviewed. The big question today is whether these criticisms are impactful enough to disqualify the ThinkPad Yoga as a rational alternative to other ThinkPad convertibles and the consumer-grade Yoga models. It’s a tall order, so let’s tackle it.
First up, the specs:
While most of this list is pretty conventional, the astute might have already picked out one particular item which tops the X240 we recently reviewed: a possible 16 GB of dual-channel RAM. The X240 was limited to just 8 GB of single-channel memory thanks to a mere single SODIMM slot. The ThinkPad Yoga also boasts a 1080p screen with a Wacom digitizer pen—something which is clearly superior to our X240 review unit. Sadly missing, however, are the integrated Gigabit Ethernet port and the VGA port—and the mini DisplayPort has been replaced by a mini-HDMI, which ultimately is decidedly inferior.
Introduction, Specifications and Packaging
A few months back, we took a look at the ADATA Premier Pro SP920 series of SSDs. Those came equipped with the Marvell 88SS9189 controller. Marvell SSD controllers have always done a good job, and they were among the first to support SATA 6Gbit speeds. Crucial was one of the first to adopt the Marvell controller into their SATA SSD products, so it seems fitting that we revisit the 88SS9189 controller in the form of Micron's Crucial M550 Series of SSDs:
Being one of the big manufacturers of SSDs, Micron has some cool production videos. Here's one of their videos covering the production of flash all the way through to the assembly of an SSD. We actually toured one of these plants a few years back. Good stuff:
Introduction and Specs
*** NOTE ***
In the preparation for this review, we noted abnormal behavior with the 6TB Red. After coordination with Western Digital, they replicated our results and will be issuing a firmware to correct the issue. We are publishing this piece as-is, with caveats added as appropriate. We will revisit this piece with an additional update once we have retested the 6TB Red on the updated firmware / configuration. More information / detail is available in our related news post on this matter.
*** END NOTE ***
Last year we covered the benefits of TLER enabled drives, and the potential for drive errors in a RAID can lead to the potential loss of entire arrays. Western Digital solved this problem by their introduction of the WD Red series. That series was since incrementally updated to include a 4TB capacity, and other Western Digital lines were also scaled up to 4TB capacities.
This week the Red line was updated to include both 5TB and 6TB models, sporting 1.2TB per platter. Performance is expected to be slightly improved over the older / smaller capacities of the Red. The upgraded line will use an improved 'NASware 3.0' firmware, which makes improvements to Western Digital's software based vibration compensation. These improvements mean WD can now support up to 8 Reds in a single chassis (up from 5 with NASware 2.0).
Also announced was the new Red Pro line, available in capacities up to 4TB. The Red Pro is just as it sounds - a 'Pro' version of the Red. This model borrows more features from WD's enterprise line, making it very similar to an SE series HDD. Imagine a Red, but at 7200RPM and more aggressive seek times. The Red Pro also borrows the enterprise-grade 5-year warranty and is supported in chassis up to 16 bays, thanks to built-in hardware vibration compensation. When all is said and done, the Red Pro is basically a WD SE with firmware tweaked for NAS workloads.
As a recap of what can potentially happen if you have a large RAID with 'normal' consumer grade HDD's (and by consumer grade I mean those without any form of Time Limited Error Recovery, or TLER for short):
- Array starts off operating as normal, but drive 3 has a bad sector that cropped up a few months back. This has gone unnoticed because the bad sector was part of a rarely accessed file.
- During operation, drive 1 encounters a new bad sector.
- Since drive 1 is a consumer drive it goes into a retry loop, repeatedly attempting to read and correct the bad sector.
- The RAID controller exceeds its timeout threshold waiting on drive 1 and marks it offline.
- Array is now in degraded status with drive 1 marked as failed.
- User replaces drive 1. RAID controller initiates rebuild using parity data from the other drives.
- During rebuild, RAID controller encounters the bad sector on drive 3.
- Since drive 3 is a consumer drive it goes into a retry loop, repeatedly attempting to read and correct the bad sector.
- The RAID controller exceeds its timeout threshold waiting on drive 3 and marks it offline.
- Rebuild fails.
- Blamo, your data is now (mostly) inaccessible.
I went into much further detail on this back in the intro to the WD 3TB Red piece, but the short of it is that you absolutely should use a HDD intended for RAID when building one.
Redefining Price/Performance with AMD Motherboards
Motherboards are fascinating to me. They always have been. I remember voraciously reading motherboard reviews in the mid-90s. I simply could not get enough of them. Some new chipset from SiS, VIA, or ALi? I scoured the internet for information on them and what new features they would bring to the table. Back then motherboards did not have the retail presence they do now. The manufacturers were starting to learn to differentiate their products and cater to the enthusiasts who would not only buy and support these products, but also recommend them to friends/family/the world.
Today motherboards are really the foundation for any PC build. Choosing a motherboard is no longer just picking up some whitebox board that has a 440 BX chipset. Now users are much more active in debating what kind of features they need, what kind of feedback has this manufacturer received from consumers, what kind of ratings the board has on Amazon or Newegg. Features like build quality or overclocking performance sway users from company to company and product to product.
In the past 15 years or so we have seen some pretty rigid guidelines for pricing of motherboards. The super cheap “PC Chips” style motherboards existed below the $90 range. The decent, but unexciting motherboards with the bare minimum of features would go from $90 to $150. The $150 and beyond products were typically considered enthusiast class motherboards with expanded features, better build quality, and more robust power delivery options. Thankfully for consumers, this model is being shaken up by the latest generation of products from AMD.
MSI insures that everything is nicely packed and protected in their black and red box.
I mentioned in the previous Gigabyte G1.Sniper.A88X review that AMD and its partners do not have the luxury of offering a $150 and above FM2+ motherboard due to the nature (and pricing) of the latest FM2+ APUs. I am fairly sure the amount of people willing to spend $200 on a motherboard to house a $179 APU that seemingly overclocks as well on a cheap board as it does a more expensive one (meaning, not very well at all) is pretty low. If there is one bright side to the latest Kaveri APUs, it is that the graphics portion is extremely robust in both graphics and OpenCL applications. The hope for AMD and users alike is that HSA will in fact take off and provide a significant performance boost in a wide variety of applications that typically require quite a bit of horsepower.
SHIELD Tablet with new Features
It's odd how regular these events seem to come. Almost exactly one year ago today, NVIDIA launched the SHIELD gaming device, which is a portable Android tablet attached to a controller, all powered by the Tegra 4 SoC. It was a completely unique device that combined a 5-in touchscreen with a console-grade controller to build the best Android gaming machine you could buy. NVIDIA did its best to promote Android gaming as a secondary market to consoles and PCs, and the frequent software updates kept the SHIELD nearly-up-to-date with the latest Android software releases.
As we approach the one year anniversary of SHIELD, NVIDIA is preparing to release another product to add to the SHIELD family of products: the SHIELD Tablet. Chances are, you could guess what this device is already. It is a tablet powered by Tegra K1 and updated to support all SHIELD software. Of course, there are some new twists as well.
The NVIDIA SHIELD Tablet is being targeted, as the slide above states, at being "the ultimate tablet for gamers." This is a fairly important point to keep in mind as you we walk through the details of the SHIELD tablet, and its accessories, as there are certain areas where NVIDIA's latest product won't quite appeal to you for general purpose tablet users.
Most obviously, this new SHIELD device is a tablet (and only a tablet). There is no permanently attached controller. Instead, the SHIELD controller will be an add-on accessory for buyers. NVIDIA has put a lot of processing power into the tablet as well as incredibly interesting new software capabilities to enable 10-ft use cases and even mobile Twitch streaming.
The First with the Tegra K1 Processor
Back in May a Chinese company announced what was then the first and only product based on NVIDIA’s Tegra K1 SoC, the Xiaomi Mi Pad 7.9. Since then we have had a couple of other products hit our news wire including Google’s own Project Tango development tablet. But the Xiaomi is the first to actually be released, selling through 50,000 units in four minutes according to some reports. I happened to find one on Aliexpress.com, a Chinese sell-through website, and after a few short days the DHL deliveryman dropped the Tegra K1 powered machine off at my door.
If you are like me, the Xiaomi name was a new one. A privately owned company from Beijing and has become one of China’s largest electronics companies, jumping into the smartphone market in 2011. The Mi Pad marks the company’s first attempt at a tablet device, and the partnership with NVIDIA to be an early seller of the Tegra K1 seems to be making waves.
The Tegra K1 Processor
The Tegra K1 SoC was first revealed at CES in January of 2014, and with it came a heavy burden of expectation from NVIDIA directly, as well as from investors and the media. The first SoC from the Tegra family to have a GPU built from the ground up by NVIDIA engineers, the Tegra K1 gets its name from the Kepler family of GPUs. It also happens to get the base of its architecture there as well.
The processor of the Tegra K1 look very familiar and include four ARM Cortex-A15 “r3” cores and 2MB of L2 cache with a fifth A15 core used for lower power situations. This 4+1 design is the same that was introduced with the Tegra 4 processor last year and allows NVIDIA to implement a style of “big.LITTLE” design that is unique. Some slight modifications to the cores are included with Tegra K1 that improve performance and efficiency, but not by much – the main CPU is very similar to the Tegra 4.
The focus on the Tegra K1 will be on the GPU, now powered by NVIDIA’s Kepler architecture. The K1 features 192 CUDA cores with a very similar design to a single SMX on today’s GeForce GTX 700-series graphics cards. This includes OpenGL ES3.0 support but much more importantly, OpenGL 4.4 and DirectX 11 integration. The ambition of bringing modern, quality PC gaming to mobile devices is going to be closer than you ever thought possible with this product and the demos I have seen running on reference designs are enough to leave your jaw on the floor.
By far the most impressive part of Tegra K1 is the implementation of a full Kepler SMX onto a chip that will be running well under 2 watts. While it has been the plan from NVIDIA to merge the primary GPU architectures between mobile and discrete, this choice did not come without some risk. When the company was building the first Tegra part it basically had to make a hedge on where the world of mobile technology would be in 2015. NVIDIA might have continued to evolve and change the initial GPU IP that was used in Tegra 1, adding feature support and increasing the required die area to improve overall GPU performance, but instead they opted to position a “merge point” with Kepler in 2014. The team at NVIDIA saw that they were within reach of the discontinuity point we are seeing today with Tegra K1, but in truth they had to suffer through the first iterations of Tegra GPU designs that they knew were inferior to the design coming with Kepler.
You can read much more on the technical detail of the Tegra K1 SoC by heading over to our launch article that goes into the updated CPU design, as well as giving you all the gore behind the Kepler integration.
By far the most interesting aspect of the Xiaomi Mi Pad 7.9 tablet is the decsion to integrate the Tegra K1 processor. Performance and battery life comparisons with other 7 to 8-in tablets will likely not impact how it sells in China, but the results may mean the world to NVIDIA as they implore other vendors to integrate the SoC.
Need 128GB at 450 MB/s in your pocket?
We don't normally do reviews on USB flash drives, even if they are USB 3.0 based. But the Corsair Flash Voyager GTX turned out to be a bit different. Not only is this a USB 3.0 capable thumb drive, it is powered by an SSD controller, pushing performance as high as 460 MB/s in our testing! Add to that capacity options of 128GB and 256GB and you have a flash drive that really stands out from majority of the market.
Check out the video review below that Allyn and I made about the Corsair Flash Voyager GTX 128GB flash drive and then continue on to see some more pictures and our quick benchmark results.
The Flash Voyager GTX is a bit large in pantheon of USB thumb drives but it's actually smaller than I expected it when I heard the capacity options available. You'll definitely be able to keep this around your neck or in your pocket without noticing it and you may still be able to keep it on your key ring.
What do you do with 128GB or 256GB of flash drive? Well, other than the obvious of having a huge capacity drive for your "sneaker net" implementation at your home or office, you can investigate more interesting usage models. If you are looking for a more secure place to store sensitive files that you don't want on your home or work PC full time, just keep them on the Flash Voyager GTX and plug it into a USB 3.0 port when you want access. You'll get performance on par with an SSD but the ability to quickly disconnect it.
Get notified when we go live!