All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
The AMD Radeon R9 280X
Today marks the first step in an introduction of an entire AMD Radeon discrete graphics product stack revamp. Between now and the end of 2013, AMD will completely cycle out Radeon HD 7000 cards and replace them with a new branding scheme. The "HD" branding is on its way out and it makes sense. Consumers have moved on to UHD and WQXGA display standards; HD is no longer extraordinary.
But I want to be very clear and upfront with you: today is not the day that you’ll learn about the new Hawaii GPU that AMD promised would dominate the performance per dollar metrics for enthusiasts. The Radeon R9 290X will be a little bit down the road. Instead, today’s review will look at three other Radeon products: the R9 280X, the R9 270X and the R7 260X. None of these products are really “new”, though, and instead must be considered rebrands or repositionings.
There are some changes to discuss with each of these products, including clock speeds and more importantly, pricing. Some are specific to a certain model, others are more universal (such as updated Eyefinity display support).
Let’s start with the R9 280X.
AMD Radeon R9 280X – Tahiti aging gracefully
The AMD Radeon R9 280X is built from the exact same ASIC (chip) that powers the previous Radeon HD 7970 GHz Edition with a few modest changes. The core clock speed of the R9 280X is actually a little bit lower at reference rates than the Radeon HD 7970 GHz Edition by about 50 MHz. The R9 280X GPU will hit a 1.0 GHz rate while the previous model was reaching 1.05 GHz; not much a change but an interesting decision to be made for sure.
Because of that speed difference the R9 280X has a lower peak compute capability of 4.1 TFLOPS compared to the 4.3 TFLOPS of the 7970 GHz. The memory clock speed is the same (6.0 Gbps) and the board power is the same, with a typical peak of 250 watts.
Everything else remains the same as you know it on the HD 7970 cards. There are 2048 stream processors in the Tahiti version of AMD’s GCN (Graphics Core Next), 128 texture units and 32 ROPs all being pushed by a 384-bit GDDR5 memory bus running at 6.0 GHz. Yep, still with a 3GB frame buffer.
Introduction and Design
As we’re swimming through the veritable flood of Haswell refresh notebooks, we’ve stumbled across the latest in a line of very popular gaming models: the ASUS G750JX-DB71. This notebook is the successor to the well-known G75 series, which topped out at an Intel Core i7-3630QM with NVIDIA GeForce GTX 670MX dedicated graphics. Now, ASUS has jacked up the specs a little more, including the latest 4th-gen CPUs from Intel as well as 700-series NVIDIA GPUs.
Our ASUS G750JX-DB71 test unit features the following specs:
Of course, the closest comparison to this unit is already the most recently-reviewed MSI GT60-2OD-026US, which featured nearly identical specifications, apart from a 15.6” screen, a better GPU (a GTX 780M with 4 GB GDDR5), and a slightly different CPU (the Intel Core i7-4700MQ). In case you’re wondering what the difference is between the ASUS G750JX’s Core i7-4700MQ and the GT60’s i7-4700HQ, it’s very minor: the HQ features a slightly faster integrated graphics Turbo frequency (1.2 GHz vs. 1.15 GHz) and supports Intel Virtualization Technology for Directed I/O (VT-d). Since the G750JX doesn’t support Optimus, we won’t ever be using the integrated graphics, and unless you’re doing a lot with virtual machines, VT-d isn’t likely to offer any benefits, either. So for all intents and purposes, the CPUs are equivalent—meaning the biggest overall performance difference (on the spec sheet, anyway) lies with the GPU and the storage devices (where the G750JX offers more solid-state storage than the GT60). It’s no secret that the MSI GT60 burned up our benchmarks—so the real question is, how close is the ASUS G750JX to its pedestal, and if the differences are considerable, are they justified?
At an MSRP of around $2,000 (though it can be found for around $100 less), the ASUS G750JX-DB71 competes directly with the likes of the MSI GT60, too (which is priced equivalently). The question, of course, is whether it truly competes. Let’s find out!
A new generation of Software Rendering Engines.
We have been busy with side projects, here at PC Perspective, over the last year. Ryan has nearly broken his back rating the frames. Ken, along with running the video equipment and "getting an education", developed a hardware switching device for Wirecase and XSplit.
My project, "Perpetual Motion Engine", has been researching and developing a GPU-accelerated software rendering engine. Now, to be clear, this is just in very early development for the moment. The point is not to draw beautiful scenes. Not yet. The point is to show what OpenGL and DirectX does and what limits are removed when you do the math directly.
Errata: BioShock uses a modified Unreal Engine 2.5, not 3.
In the above video:
- I show the problems with graphics APIs such as DirectX and OpenGL.
- I talk about what those APIs attempt to solve, finding color values for your monitor.
- I discuss the advantages of boiling graphics problems down to general mathematics.
- Finally, I prove the advantages of boiling graphics problems down to general mathematics.
I would recommend watching the video, first, before moving forward with the rest of the editorial. A few parts need to be seen for better understanding.
Introduction and Technical Specifications
Courtesy of MSI
The Z87 XPower board is the flagship motherboard in MSI's MPower product line. The board supports the latest generation of Intel LGA1150-based processors with all the over-engineered goodness you've come to expect from an MSI flagship board. The Z87 XPower sports the black and yellow theme of the product line, along with integrated LEDs to really make the board stand out. While its $439.99 retail may seem a bit high, the stability, features, and raw power of the board make it a wise investment for those that only want the best.
Courtesy of MSI
Courtesy of MSI
Designed with a 32-phase digital power system and an eight-layer PCB, the MSI Z87 XPower is armed to take any amount of punishment you can throw at it. MSI incorporated a plethora of features into its massive XL-ATX form factor board: 10 SATA 6Gb/s ports; a mSATA 6Gb/s port; a Killer E2205 GigE NIC; Intel 802.11n WiFi and Bluetooth adapter; five PCI-Express x16 slots for up to quad-card NVIDIA SLI or AMD CrossFire support; two PCI-Express x1 slots; Lucidlogix Virtu® MVP 2.0 support; onboard power, reset, BIOS reset, CPU ratio control, base clock control, OC Genie, power discharge, and Go2BIOS buttons; multi-BIOS and PCIe control switches; 2-digit diagnostic LED display; 14 voltage check points; independent audio subsystem PCB design; and USB 2.0 and 3.0 port support.
Courtesy of MSI
Introduction and Features
Be Quiet! has been a market leader for PC power supplies in Germany for seven years straight and now they are bringing their value-minded Pure Power L8 series to North American markets. Earlier this year, we reviewed Be Quiet!’s top-of-the-line Dark Power Pro 10 850W PSU and found it to be an outstanding high-end, enthusiast grade power supply. Now we are going to take a look at the budget-oriented Pure Power L8 700W PSU. The Pure Power L8 series features a 120mm Be Quiet! SilentWings L8 fan, are certified for 80Plus Bronze efficiency, come with fixed cables, and are backed by a 3-year warranty.
Be Quiet! is targeting the Pure Power L8 series for gaming with multi-GPU capacity, silent PC builds, multimedia and Home Theater systems, and photo and video editing desktops.
Here is what Be Quiet! has to say about their Pure Power L8 700W PSU: “The Pure Power L8 700W provides true affordability, peerless dependability and best-in-class features – not cutting corners and settling for less. Pure Power L8 700W features rock-solid voltages, strong reliability, high efficiency and exceptional quiet – simply the best combination of features, performance and quality in the class – at a very popular price.”
Be Quiet! Pure Power L8 700W PSU Key Features:
• Exceptionally quiet operation: 120mm SilentWings fan
• 700W of continuous power output
• Two independent +12V rails for improved power stability
• 80Plus Bronze certification (up to 88% power conversion efficiency)
• Meets Energy Star 5.2 Guidelines
• Fulfills ErP 2013 Guidelines
• Ready for Intel Haswell platform
• Supports Intel’s Deep Power Down C6/C7 mode
• Sleeved cables for improved cooling and more attractive looks
• NVIDIA SLI Ready and AMD CrossFireX certified
• Four PCI-E connectors for multi-GPU support
• 3-Year warranty
If Microsoft was left to their own devices...
Microsoft's Financial Analyst Meeting 2013 set the stage, literally, for Steve Ballmer's last annual keynote to investors. The speech promoted Microsoft, its potential, and its unique position in the industry. He proclaims, firmly, their desire to be a devices and services company.
The explanation, however, does not befit either industry.
Ballmer noted, early in the keynote, how Bing is the only notable competitor to Google Search. He wanted to make it clear, to investors, that Microsoft needs to remain in the search business to challenge Google. The implication is that Microsoft can fill the cracks where Google does not, or even cannot, and establish a business from that foothold. I agree. Proprietary products (which are not inherently bad by the way), as Google Search is, require one or more rivals to fill the overlooked or under-served niches. A legitimate business can be established from that basis.
It is the following, similar, statement which troubles me.
Ballmer later mentioned, along the same vein, how Microsoft is among the few making fundamental operating system investments. Like search, the implication is that operating systems are proprietary products which must compete against one another. This, albeit subtly, does not match their vision as a devices and services company. The point of a proprietary platform is to own the ecosystem, from end to end, and to derive your value from that control. The product is not a device; the product is not a service; the product is a platform. This makes sense to them because, from birth, they were a company which sold platforms.
A platform as a product is not a device nor is it service.
Another Next Unit of Computing
Just about a year ago Intel released a new product called the Next Unit of Computing, or NUC for short. The idea was to allow Intel's board and design teams to bring the efficient performance of the ultra low voltage processors to a desktop, and creative, form factor. By taking what is essentially Ultrabook hardware and putting it in a 4-in by 4-in design Intel is attempting to rethink what the "desktop" computer is and how the industry develops for it.
We reviewed the first NUC last year, based on the Intel Ivy Bridge processor and took away a surprising amount of interest in the platform. It was (and is) a bit more expensive than many consumers are going to be willing to spend on such a "small" physical device but the performance and feature set is compelling.
This time around Intel has updated the 4x4 enclosure a bit and upgrade the hardware from Ivy Bridge to Haswell. That alone should result in a modest increase in CPU performance with quite a bit of increase in the integrated GPU performance courtesy of the Intel HD Graphics 5000. Other changes are on the table to; let's take a look.
The Intel D54250WYK NUC is a bare bones system that will run you about $360. You'll need to buy system memory and an mSATA SSD for storage (wireless is optional) to complete the build.
AMD is up to some interesting things. Today at AMD’s tech day, we discovered a veritable cornucopia of information. Some of it was pretty interesting (audio), some was discussed ad-naseum (audio, audio, and more audio), and one thing in particular was quite shocking. Mantle was the final, big subject that AMD was willing to discuss. Many assumed that the R9 290X would be the primary focus of this talk, but in fact it very much was an aside that was not discussed at any length. AMD basically said, “Yes, the card exists, and it has some new features that we are not going to really go over at this time.” Mantle, as a technology, is at the same time a logical step as well as an unforeseen one. So what all does Mantle mean for users?
Looking back through the mists of time, when dinosaurs roamed the earth, the individual 3D chip makers all implemented low level APIs that allowed programmers to get closer to the silicon than what other APIs such as Direct3D and OpenGL would allow. This was a very efficient way of doing things in terms of graphics performance. It was an inefficient way to do things for a developer writing code for multiple APIs. Microsoft and the Kronos Group had solutions with Direct3D and OpenGL that allowed these programmers to develop for these high level APIs very simply (comparatively so). The developers could write code that would run D3D/OpenGL, and the graphics chip manufacturers would write drivers that would interface with Direct3D/OpenGL, which then go through a hardware abstraction layer to communicate with the hardware. The onus was then on the graphics people to create solid, high performance drivers that would work well with DirectX or OpenGL, so the game developer would not have to code directly for a multitude of current and older graphics cards.
Introduction and Features
Corsair offers a full line of high quality power supplies, memory components, cases, cooling components, SSDs and accessories to the PC market. Corsair's new RM Series includes six models; the RM450, RM550, RM650, RM750, RM850 and RM1000. All of the power supplies in the RM Series feature all-modular cables, an energy-efficient design (80 Plus Gold certified) and quiet operation thanks to their ability to run without a cooling fun up to 40% load. The RM Series offers many of the same features as the Corsair HX Series (fanless operation, Gold level efficiency, fully-modular cables) but are a little less expensive. And all RM Series power supplies are Corsair Link ready, which means you can monitor the PSU fan speed and +12V output right from your desktop if you have a Corsair Link system set up on your PC. Previously the Corsair Link option was only available on Corsair’s premium AX Series Digital power supplies.
Here is what Corsair has to say about their RM550 PSU we will be looking at in this review: “The Corsair RM550 is fully modular and optimized for silence and high efficiency. It’s built with low-noise capacitors and transformers, and Zero RPM Fan Mode ensures that the fan doesn’t even spin until the power supply is under heavy load. And with a fan that’s custom-designed for low noise operation, it’s whisper-quiet even when it’s pushed hard.
80Plus Gold rated efficiency saves you money on your power bill, and the low-profile black cables are fully modular, so you can enjoy fast, neat builds. And, like all Corsair power supplies, the RM550 is built with high-quality components and is guaranteed to deliver clean, stable, continuous power. Want even more? Connect it to your Corsair Link system (available separately) and you can even monitor fan speed and +12V current directly from your desktop.”
Corsair RM550 PSU Key Features:
• Silent, fan-less operation up to 40% load
• 80Plus Gold certified, delivering over 92% efficiency under real world loads
• Fully modular, low-profile flat cables help maximize case airflow
• Corsair Link ready!
• High-quality capacitors provide uncompromised performance and reliability
• Active PFC and Universal AC input (100-240 VAC)
• Safety: FCC, ICES, CE, C TUV US, RCM, TUV, CB, CCC, BSMI, GOST, ROHS, WEEE, KC, TUV-S
• 5-Year warranty and lifetime access to tech support and customer service
Over the past few weeks, I have been developing a device that enables external control of Wirecast and XSplit. Here's a video of the device in action:
But now, let's get into the a little bit of background information:
While the TriCaster from NewTek has made great strides in decreasing the cost of video switching hardware, and can be credited with some of the rapid expansion of live streaming on the Internet, it still requires an initial investment of about $20,000 on the entry-level. Even though this is down from around 5x or 10x the cost just a few years ago for professional-grade hardware, a significant startup cost is still presented.
This brings us to my day job. For the past 4 years I have worked here at PC Perspective. My job began as an intern helping to develop video content, but quickly expanded from there. Several years ago, we decided to make the jump to live content, and started investing in the required infrastructure. Since we obviously didn't need to worry about the availability of PC Hardware, we decided to go with the software video switching route, as opposed to dedicated hardware like the TriCaster. At the time, we started experimenting with Wirecast and bought a few Blackmagic Intensity Pro HDMI capture cards for our Canon Vixia HV30 cameras. Overall, building an 6 core computer (Core i7-980x in those days) with 3 capture cards resulted in an investment of about $2500.
Advantages to the software route not only consisted of a much cheaper initial investment, we had an operation running for about a 1/10th of the cost of a TriCaster, but ultimately our setup was more expandable. If we had gone with a TriCaster we would have a fixed number of inputs, but in this configuration we could add more inputs on the fly as long as we had available I/O on our computer.
Summary of Events
In January of 2013 I revealed a new testing methodology for graphics cards that I dubbed Frame Rating. At the time I was only able to talk about the process, using capture hardware to record the output directly from the DVI connections on graphics cards, but over the course of a few months started to release data and information using this technology. I followed up the story in January with a collection of videos that displayed some of the capture video and what kind of performance issues and anomalies we were able to easily find.
My first full test results were published in February to quite a bit of stir and then finally in late March released Frame Rating Dissected: Full Details on Capture-based Graphics Performance Testing which dramatically changed the way graphics cards and gaming performance was discussed and evaluated forever.
Our testing proved that AMD CrossFire was not improving gaming experiences in the same way that NVIDIA SLI was. Also, we showed that other testing tools like FRAPS were inadequate in showcasing this problem. If you are at all unfamiliar with this testing process or the results it showed, please check out the Frame Rating Dissected story above.
At the time, we tested 5760x1080 resolution using AMD Eyefinity and NVIDIA Surround but found there were too many issues and problems with our scripts and the results they were presenting to give reasonably assured performance metrics. Running AMD + Eyefinity was obviously causing some problems but I wasn’t quite able to pinpoint what they were and how severe it might have been. Instead I posted graphs like this:
We were able to show NVIDIA GTX 680 performance and scaling in SLI at 5760x1080 but we only were giving results for the Radeon HD 7970 GHz Edition in a single GPU configuration.
Since those stories were released, AMD has been very active. At first they were hesitant to believe our results and called into question our processes and the ability for gamers to really see the frame rate issues we were describing. However, after months of work and pressure from quite a few press outlets, AMD released a 13.8 beta driver that offered a Frame Pacing option in the 3D controls that enables the ability to evenly space out frames in multi-GPU configurations producing a smoother gaming experience.
The results were great! The new AMD driver produced very consistent frame times and put CrossFire on a similar playing field to NVIDIA’s SLI technology. There were limitation though: the driver only fixed DX10/11 games and only addressed resolutions of 2560x1440 and below.
But the story won’t end there. CrossFire and Eyefinity are still very important in a lot of gamers minds and with the constant price drops in 1920x1080 panels, more and more gamers are taking (or thinking of taking) the plunge to the world of Eyefinity and Surround. As it turns out though, there are some more problems and complications with Eyefinity and high-resolution gaming (multi-head 4K) that are cropping up and deserve discussion.
Introduction and Technical Specifications
Courtesy of ECS
ECS seems to like gold and catchy titles. Building on the reputation of their previous generation Z77-based Golden Board series, ECS designed the Z87-based Z87H3-A2X Extreme to dominate the competition. ECS liberally spread the gold, giving all capacitors and connection pins a nice 24k coating. They even include a small fan hidden under the upper VRM heat sink for active heat pipe cooling. At an MSRP of $239.99, ECS priced the Z87H3-A2X Extreme board to aggressively compete with other manufacturers' high end offerings.
Courtesy of ECS
ECS integrated a full 12 digital power phases into the board's CPU power regulation system for optimal stability and power delivery under the most demanding circumstances. The features designed into the Z87H3-A2X Extreme include: nine SATA 6Gb/s ports; mPCIe/mSATA port; dual Realtek GigE NICs; three PCI-Express x16 slots for up to tri-card support; one PCI-Express x1 slot; one PCI slot; on-board power, reset, BIOS reset, Boot to BIOS, BIOS backup, 80P, and Quick-OC buttons; 3-digit diagnostic LED display; integrated voltage measurement points; and USB 2.0 and 3.0 port support. The 80P button configures what information displays on the diagnostic display once the board has successfully initialized.
Courtesy of ECS
Courtesy of ECS
As part of their L337 Gaming series boards, ECS redesigned the power delivery and integrated cooling solutions for a better gaming experience. The Z87H3-A2X Extreme has the latest generation cooling technology encompassed in ECS' QoolTech V. Additionally, all VRM-related power components have been cherry picked by ECS for operationally longevity under extreme duress.
Introduction and Features
Corsair’s Carbide Series currently includes eight models in different sizes, shapes, and colors (mostly black but the 500R is available in white) which includes the 200R, 300R, 330R, 400R, 500R, and the Air-540 High Airflow Cube case.
In this review we are going to take a detailed look at Corsair’s Carbide Series 330R quiet mid-tower case. The 330R incorporates superior sound absorption material for quiet operation, numerous cooling options, and support for multiple, extended length VGA cards. The 330R enclosure features a full length, hinged front door and comes with one 140mm intake fan in the front and one 120mm exhaust fan on the back with five optional fan mounting locations along with support for liquid cooling radiators.
(Courtesy of Corsair)
Here is what Corsair has to say about their Carbide Series enclosures: “Corsair Carbide Series® mid-tower PC cases have the high-end features you need, and nothing you don’t. Designed to be the foundation of awesome yet approachable gaming PCs, they combine the latest technology and ergonomic innovations with lots of room to build and expand, and amazing cooling potential!”
(Courtesy of Corsair)
Carbide 330R Quiet Mid-Tower Case Key Features:
• Supports E-ATX, ATX, Micro ATX and Mini ATX motherboards
• Extensive noise dampening material on the front door, side panels, and top panel to quiet noisy internal components
• Hinged front door is reversible, with angled air intakes to reflect internal noise away from the user
• Direct airflow to components – the front 140mm fan is unrestricted by hard drive cages and protected by a low-restriction dust filter
• Removable top panel, with top fan mounts pre-drilled for 240mm or 280mm fans and/or liquid cooling radiators
• Excellent cooling and low noise levels with up to five separate fan mounting locations
o Front: 140mm fan included (upgradable to dual 120mm or 140mm)
o Top: Dual 120mm or 140mm
o Rear: 120mm fan included
• USB 3.0 on front panel with internal motherboard connectors
• Four 3.5” / 2.5” hard drive bays with full SSD compatibility
• Three 5.25” front exposed drive bays
• Tool-free installation of 5.25” and 3.5” drives
• Up to 450mm (17.6”) of space for long graphics cards
• Up to 160mm (6.3”) of space for CPU coolers
• Cable routing cutouts to keep cables out of the airflow path
A Whole New Atom Family
This past spring I spent some time with Intel at its offices in Santa Clara to learn about a brand new architecture called Silvermont. Built for and targeted at low power platforms like tablets and smartphones, Silvermont was not simply another refresh of the aging Atom processors that were all based on Pentium cores from years ago; instead Silvermont was built from the ground up for low power consumption and high efficiency to compete against the juggernaut that is ARM and its partners. My initial preview of the Silvermont architecture had plenty of detail about the change to an out-of-order architecture, the dual-core modules that comprise it and the power optimizations included.
Today, during the annual Intel Developer Forum held in San Francisco, we are finally able to reveal the remaining details about the new Atom processors based on Silvermont, code named Bay Trail. Not only do we have new information about the designs, but we were able to get our hands on some reference tablets integrating Bay Trail and the new Atom Z3000 series of SoCs to benchmark and compare to offerings from Qualcomm, NVIDIA and AMD.
A Whole New Atom Family
It should be surprise to anyone that the name “Intel Atom Processor” has had a stigma attached to it almost since its initial release during the netbook craze. It was known for being slow and hastily put together though it was still a very successful product in terms of sales. With each successive release and update, Diamondville to Pineview to Cedarview, Atom was improved but only marginally so. Even with Medfield and Clover Trail the products were based around that legacy infrastructure and it showed. Tablets and systems based on Clover Trail saw only moderate success and lukewarm reviews.
With Silvermont the Atom brand gets a second chance. Some may consider it a fifth or sixth chance, but Intel is sticking with the name. Silvermont as an architecture is incredibly flexible and will find its way into several Intel products like Avoton, Bay Trail and Merrifield and in segments from the micro-server to smartphones to convertible tablets. Not only that, but Intel is aware that Windows isn’t the only game out there anymore and the company will support the architecture across Linux, Android and Windows environments.
Atom has been in tablets for some time now, starting in September of last year with Clover Trail deigns being announced during IDF. In February we saw the initial Android-based options also filter out, again based on Clover Trail. They were okay, but really only stop-gaps to prove that Intel was serious about the space. The real test will be this holiday season with Bay Trail at the helm.
While we always knew these Bay Trail platforms were going be branded as Atom we now have the full details on the numbering scheme and productization of the architecture. The Atom Z3700 series will consist of quad-core SoCs with Intel HD graphics (the same design as the Core processor series though with fewer compute units) that will support Windows and Android operating systems. The Atom Z3600 will be dual-core processors, still with Intel HD graphics, targeted only at the Android market.
Retiring the Workhorses
There is an inevitable shift coming. Honestly, this has been quite obvious for some time, but it has just taken AMD a bit longer to get here than many have expected. Some years back we saw AMD release their new motto, “The Future is Fusion”. While many thought it somewhat interesting and trite, it actually foreshadowed the massive shift from monolithic CPU cores to their APUs. Right now AMD’s APUs are doing “ok” in desktops and are gaining traction in mobile applications. What most people do not realize is that AMD will be going all APU all the time in the very near future.
We can look over the past few years and see that AMD has been headed in this direction for some time, but they simply have not had all the materials in place to make this dramatic shift. To get a better understanding of where AMD is heading, how they plan to address multiple markets, and what kind of pressures they are under, we have to look at the two major non-APU markets that AMD is currently hanging onto by a thread. In some ways, timing has been against AMD, not to mention available process technologies.
Last July, I went on a bit of a mini-rant about how using a bunch of drives not meant to be in a RAID could potentially lead to loss of the entire array from only a few bad sectors spread across several disks. Western Digital solved this problem by their introduction of the WD Red series. That series capped out at 3TB, and users were pushing for larger storage capacities for their NAS devices. In addition to the need for larger disks came the need for *smaller* disks as well, as there are some manufacturers that wish to create NAS / HTPC type devices that house multiple 2.5" HDD's. One such device is the Drobo Mini - a 4x2.5" device which has not really had a 'proper' NAS storage element available - until now:
Today Western Digital has announced a twofold expansion to their Red Series. First is a 4TB capacity in their 3.5" series, and second is a 2.5" iteration of the Red, available in both 750GB and 1TB capacities.
As a recap of what can potentially happen if you have a large RAID with 'normal' consumer grade HDD's (and by consumer grade I mean those without any form of Time Limited Error Recovery, or TLER for short):
- Array starts off operating as normal, but drive 3 has a bad sector that cropped up a few months back. This has gone unnoticed because the bad sector was part of a rarely accessed file.
- During operation, drive 1 encounters a new bad sector.
- Since drive 1 is a consumer drive it goes into a retry loop, repeatedly attempting to read and correct the bad sector.
- The RAID controller exceeds its timeout threshold waiting on drive 1 and marks it offline.
- Array is now in degraded status with drive 1 marked as failed.
- User replaces drive 1. RAID controller initiates rebuild using parity data from the other drives.
- During rebuild, RAID controller encounters the bad sector on drive 3.
- Since drive 3 is a consumer drive it goes into a retry loop, repeatedly attempting to read and correct the bad sector.
- The RAID controller exceeds its timeout threshold waiting on drive 3 and marks it offline.
- Rebuild fails.
- Blamo, your data is now (mostly) inaccessible.
I went into much further detail on this back in the intro to the WD 3TB Red piece, but the short of it is that you absolutely should use a HDD intended for RAID when building one, and Western Digital is removing that last excuse for not doing so by introducing a flagship 4TB capacity to the Red Series.
Very Minor Changes
November 14th, 2011 - that is the date that Intel introduced the LGA 2011 socket and the Sandy Bridge-E processor. Intel continued their pattern of modifying their mainstream architecture, Sandy Bridge at the time, into a higher performance (and higher priced) enthusiast class. The new socket differentiated these components into their own category for workstation users and others who demand top performance. Today Intel officially unveils the Ivy Bridge-E platform with essentially the same mindset.
The top end offering under the IVB-E name is the Core i7-4960X, a six-core, HyperThreaded processor with Turbo Boost technology and up to 15MB of L3 cache. Sound familiar? It should. There is really very little different about the new 4960X when compared to the Sandy Bridge-E Core i7-3960X released in 2011. In fact, the new processors use the exact same socket and will work on the same X79 motherboards already on the market. (Pending, of course, on whether your manufacturer has updated the UEFI/Firmware accordingly.)
The Ivy Bridge-E Platform
Even though the platform and features are nearly identical between Sandy Bridge-E and Ivy Bridge-E there are some readers that might need a refresher or maybe had never really investigated Socket 2011 products before today. I'll step through the major building blocks of the new Core i7-4960X just in case.
A New TriFrozr Cooler
Graphics cards are by far the most interesting topic we cover at PC Perspective. Between the battles of NVIDIA and AMD as well as the competition between board partners like EVGA, ASUS, MSI and Galaxy, there is very rarely a moment in time when we don't have a different GPU product of some kind on an active test bed. Both NVIDIA and AMD release reference cards (for the most part) with each and every new product launch and it then takes some time for board partners to really put their own stamp on the designs. Other than the figurative stamp that is the sticker on the fan.
One of the companies that has recently become well known for very custom, non-reference graphics card designs is MSI and the pinnacle of the company's engineering falls into the Lightning brand. As far back as the MSI GTX 260 Lightning and as recently as the MSI HD 7970 Lightning, these cards have combined unique cooling, custom power design and good amount of over engineering to really produce a card that has few rivals.
Today we are looking at the brand new MSI GeForce GTX 780 Lightning, a complete revamp of the GTX 780 that was released in May. Based on the same GK110 GPU as the GTX Titan card, with two fewer SMX units, the GTX 780 easily the second fastest single GPU card on the market. MSI is hoping to make the enthusiasts even more excited about the card with the Lightning design that brings a brand new TriFrozr cooler, impressive power design and overclocking capabilities that basic users and LN2 junkies can take advantage of. Just what DO you get for $750 these days?
Introduction and externals
Razer maintains a distinct sense of style across their product line. Over the past decade and a half, Razer has carved a spot in the peripherals market catering to competitive gamers as well as developing wholly novel products for the gaming market. Razer has a catalog including standard peripherals and more arcane things such as mice with telephone-style keypads geared toward MMORPG players as well as motion sensing controllers employing magnetic fields to detect controller position.
The Razer BlackWidow Ultimate Stealth 2013 Edition comes out of the box ready for use without additional software provided or assembly required. The keyboard uses a standard layout with five macro keys attached in a column on the left of the board. Rather than dedicated media buttons, media and keyboard specific functions are accessed by pressing a combination of a function key located to the right of right alt and the function keys on the top row.
The headphone and microphone jack are present on the side of the keyboard.
A unique enthusiast chassis
The Corsair Carbide Air 540 is a very unique case. It fits a full size ATX motherboard and up to four dual-slot graphics cards but it's shorter than you might expect thanks to a design choice that splits the active components from the mostly passive ones. The result is a case that is more square than rectangular yet still combines the charm of Corsair designs with the performance enthusiasts want.
For the best view of the case check out the video review below and then continue on for some additional photos and commentary.
Divided into two side by side compartments, the Air 540 has a unique front style merging a mesh look on the left with matte black paint on the right.
The right hand side includes two 5.25-in optical drive bays turned 90 degrees to fit in the smaller right hand compartment. Honestly, I am looking forward to the day that a case vendor is gutsy enough to leave off optical bays completely in an enthusiast design as I just think they take away from the overall appeal and looks.
Get notified when we go live!