All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Introduction and Features
Earlier this year Corsair added the Vengeance series to their enclosure lineup and in this review we will be taking a detailed look at the Vengeance C70 mid-tower gaming case. Corsair continues to bring a full line of high quality cases, memory components, power supplies, cooling components, SSDs and accessories to market for the PC enthusiast and professional alike. The new Vengeance cases come in three different colors: Gunmetal Black, Military Green, and Arctic White. Corsair designed the Vengeance cases for travelling gamers. They feature rugged steel construction with numerous case cooling options for going on the road to the next LAN party.
Here is what Corsair has to say about the Vengeance C70 Cases:
When it’s time to take your competitive gaming on the road, the Vengeance C70 mid-tower PC case is a great choice. It’s crafted out of solid steel and made to survive trips with less wear and tear, and the ergonomic carry handles help you move your gear with confidence.
High-performance gaming hardware requires high-performance cooling. Vengeance C70 is equipped with three 120mm fans out of the box, with mounting points for seven more to meet your exact air cooling demands.
…and Water Cover, too
Vengeance C70 is also outfitted for liquid cooling upgradability. You get 240mm radiator compatibility on top of the case, and if that’s not enough, you can remove the lower hard drive cage to fit a second 240mm radiator for a dual-loop setup.
A case is as much a part of your armory as any other component. With internal USB 3.0 connectors for modern motherboards, native SSD compatibility, eight expansion slots and room for long graphics cards, the C70 stands ready to take on any challenger.
Lock and Load
Easy access side panels come off with quick-release latches. The optical drive bays and 3.5” hard drive bays are tool-free. Thumbscrews secure your graphics cards, and the hard drive cages can be easily removed for better airflow or additional expansion room. Cable routing tie-downs and built-in clamps keep your system tidy.
With so many features, the Vengeance C70 does what it’s supposed to do – stay out of your way while you build or upgrade.
Introduction and Features
Seasonic has a well earned reputation for producing some of the best PC power supplies on the planet. Over the years, Seasonic has been the OEM (Original Equipment Manufacturer) of choice for companies like Corsair, PC Power & Cooling, and XFX to name just a few. But Seasonic also markets power supplies under their own brand name. The new X-Series 1050W and 1250W are Seasonic's newest and most powerfull PSUs to date. Both power supplies are based on Seasonic's X-Series line, which has brought several major advancements to the standard PC power supply platform since its introduction three years ago.
• Proprietary circuit design delivers High efficiency (80Plus Gold or Platinum certified)
• Full modular DC Connector Module features integrated VRMs (3.3V and 5V)
• Hybrid Silent Fan Control (3 modes of operation: Fanless, Silent and Cooling)
• High-quality Sanyo Denki SanAce120 dual ball bearing fan with PWM
• High-reliability 105°C grade A capacitors and solid polymer capacitors
Here is what Seasonic has to say about their new X-Series Gold 1050W and 1250W power supplies:
"The X-1050 and X-1250 are the newest additions to one of our most successful retail lines currently available. Now the X-Series will extend from 400 and 460 watt fanless and then 560, 660, 760, 850 watt and now 1050 and 1250 watts for top end systems; a total of eight X-Series models in all.
80Plus Gold The X-1050W and X-1250W PSUs are certified in accordance to the 80PLUS organization's high standards, offering the newest technology and innovation for performance and energy savings with up to 90% efficiency and a true power factor of greater than 0.9 PF.
Full Modular Design (DC to DC) Common to all X-Series power supplies, the new X-150 and X-1250 feature the unique integrated DC connector panel with onboard VRM (Voltage Regulator Module) that enables not only near perfect DC-to-DC conversion with reduction of current loss/impedance and increase of efficiency but also a fully modular DC cabling that enables maximum flexibility of integration and forward compatibility.
Seasonic Hybrid Silent Fan Control An industry first, advanced 3 phased (Fanless, Silent and Cooling Mode) thermal control balances between silence and cooling. In addition, a selector switch is provided to allow you to select between Seasonic S2FC control, without fanless mode or S3FC fan control with fanless mode.
Sanyo-Denki San Ace Silent Fan The world-renowned Sanyo Denki ball bearing fans are made of the highest quality components to insure maximum quality and performance. The use of spoon shaped high-density plastic fan blades with smoothed leading edges, strict tolerance ball bearings and precision copper axel are just some features to ensure ultra-low noise performance and quality."
Thoughts about Interface Design in General
I have been in several situations where a variety of people claim the gamepad is superior for gaming because that is what it was designed for. No elaboration or further justification is given. The controller is designed for gaming and is therefore clearly better. End of – despite often being start to – discussion in their minds.
Really it is a compromise between the needs of popular games and the environment of a couch.
Interface design is complicated. When you design an interface you need to consider: the expected types of applications; the environment of the user; what you are permitted to use; what tolerances are allowed; what your audience is used to; and so on, so forth. There is a lot to consider when you design an application for a user and I could make an educated guess that it is at least as hard to design the input device itself.
The history of keyboard design is a great example of tradeoffs in input devices.
Sometimes it is better to be worse...
The first wave of keyboards were interfaces to the mechanical typewriter. These keyboards were laid out in alphabetical order because as long as each key is accessible and the user could find the letter they wanted – who cares, right? We already have an order for the alphabet that people understands so the users should not have too much difficulty in finding the letter they need.
Another constraint quickly game to light: typists were too fast and the machines jammed.
The engineers now needed to design an input method which could keep up with the typist. Correcting the machine itself was somewhat futile so the solution was to make the typist as slow as possible. The most common letters in the English language were spread all over the place and – while possibly by fluke – the left hand is favored, as in made do more work, over the often dominant right hand.
The problem required making the most aggravating keyboard layout engineers could imagine. QWERTY was born.
Introduction and Features
EVGA might not be the first name that comes to mind when looking for a high-end power supply but they are about to change that with the introduction of the SuperNOVA NEX1500 Classified 1500W power supply. Not only is the SuperNOVA NEX1500 Classified the highest capacity power supply we have reviewed to date, it also comes bundled with EVGA’s SuperNOVA software that allows monitoring all of the power supply’s functions in real-time from your desktop.
EVGA was founded in 1999 with headquarters in Brea, California. They currently specialize in producing NVIDIA based graphics adapters and Intel based motherboards and they are now expanding their product line to include enthusiast grade power supplies, starting with the NEX1500. EVGA plans to add 750W and 650W models to follow.
The EVGA SuperNOVA NEX1500 Classified power supply can deliver up to 1500W combined load while operating on 120VAC mains and can be “overclocked” to 1650W if operated on 240 VAC mains. It used to be that ~1200W DC output was about as high as you could go on 120VAC mains but as the overall PSU total efficiency has increased higher outputs are now possible. The NEX1500 supports either single or multiple +12V rail modes (DIP switch selectable) and can deliver up to 124A on the +12V rail (133A in OC mode). WOW – you can weld ½” steel plate with 120A!! (OK, I might have trouble keeping the arc stable at 12V, but that is still some serious current.) This bad-boy even comes with a handle and is backed by a 10-Year warranty. And just to tickle your interest, here are a few stats you might be wondering about:
• 1500W Continuous power output @50°C (1650W in OC mode)
• 124A +12V rail (133A in OC mode)
• SuperNOVA control and monitoring software included (USB interface)
• (19) PCI-E connectors and (2) EPS12V connectors
• OEM is Etasis Electronics Corp. (well-known in the server industry)
• MSRP $449.99 USD (available now)
Here is what EVGA has to say about the new SuperNOVA NEX1500 Classified PSU:
“The EVGA NEX1500 Classified is the ultimate enthusiast power supply. Designed to support the toughest hardware, the EVGA NEX1500 Classified supports ground-breaking new features like SuperNOVA enthusiast software control, Overclock Mode that increases the maximum power output up to 1650W, and fully modular, individually sleeved cables.
You can also count on EVGA to provide the utmost reliability and performance, with 100% Japanese capacitors and a durable ball bearing fan. The NEX1500 Classified is designed from start to finish to be the best choice for today’s most demanding high-end computers. Get to the next level with the EVGA NEX1500 Classified Power Supply!"
EVGA SuperNOVA NEX1500 Classified 1500W PSU Key Features:
• SuperNOVA, exclusive power supply control and monitoring software
• Control and adjust +12V voltage for maximum overclocking potential
• Switch between single or multiple +12V rails for ultimate control
• Overclock Mode allows PSU to deliver up to 1650W with 230VAC input
• Unbeatable 10-Year Warranty and unparalleled EVGA Customer Support
• 80PLUS Gold certified, with up to 90% efficiency under typical loads
• Highest quality Japanese brand capacitors ensure long-term reliability
• Individually sleeved cables for outstanding looks and cable management
• Fully modular to reduce clutter and improve airflow
• NVIDIA SLI Certified
• Sanyo Denki ball bearing fan for exceptional reliability and quiet operation
• Universal AC input (100-240V) with Active PFC
• Heavy-duty Protections: OVP, UVP, OCP, OPP, SCP and OTP
• Dimensions: 150mm (W) x 86mm (H) x 200mm (L)
Introduction and Features
Corsair continues to bring a full line of high quality power supplies, memory components, cases, cooling components, SSDs and accessories to market for the PC enthusiast and professional alike. Corsair's updated Professional Series HX power supplies include four models; the HX650, HX750, HX850 and HX1050. All of the power supplies in the Professional Series feature modular cables, premium quality components, an energy-efficient design (now 80 Plus Gold certified) and quiet operation; and they are backed by a 7-year warranty and lifetime access to Corsair's comprehensive technical support and customer service. The most obvious differences between the new models and the old Professional Series HX PSUs are the new 80 Plus Gold efficiency certification (upgraded from 80 Plus Silver) and the ability to operate in fanless-mode.
Here is what Corsair has to say about their new Professional Series HX PSUs:
"Legendary Performance and Reliability
Corsair Professional Series HX power supplies are designed for PC builders and upgraders who need a highly efficient, quiet, and supremely-reliable power supply, with a modular cable-set that makes installation a breeze.
Quiet Operation at Low Loads
Thanks to their highly-efficient design, Corsair Professional Series power supplies generate minimal heat, and are able to operate in a silent, fully-fanless mode at up to 20% of the PSU’s maximum load (170W for the HX850). This means that Professional Series HX PSUs will be completely silent when you’re performing less intensive tasks, such as web browsing or chatting in forums. And the thermally-controlled fan spins up gradually above 20% load, so that it still operates quietly during normal use and when gaming. Basic PC power supplies have fans that spin all the time your PC is on – whether you’re pushing your graphics card to the limit or just surfing the web – making them noisier and more intrusive.
Modular Cables for Easy Installation
Professional Series power supplies have a comprehensive modular cable set that allows you to use only the cables you need for your particular set of components. The benefits of this include a cleaner, neater installation, and that ‘professionally-built’ look, plus increased airflow through the case due to reduced cable clutter. The cables are also long enough to support full-tower cases.
80 PLUS Gold: High Efficiency – Low Heat
Efficiency is the measurement of how effectively a power supply converts AC power from your wall outlet to the DC power used by your PC’s components. If your power supply isn’t efficient, it will generate more heat, which requires more cooling and more fan noise. And, it might even affect your power bill.
Professional Series HX PSUs are among the most efficient on the market. Each model has 80 Plus Gold certification, which ensures up to 90% energy-efficiency. This helps to keep your PC cool and quiet, and it may even save you money too.
Professional Series HX PSUs are built with premium components, such as 105°C capacitors, and are capable of continuous power delivery at a temperature rating of 50°C, ensuring maximum performance and reliability even in the most demanding and hot-running performance PCs.
The Corsair Advantage
Corsair Professional Series PSUs are backed by a reassuring 7-year warranty and comprehensive customer support via telephone, email, forum and the Tech Support Express helpdesk."
Introduction and Externals
Corsair manufactures a wide variety of components and peripherals for PC enthusiasts. They essentially target the most enthusiastic customers in whatever market they enter – breaking the ice with the coldest and harshest critics who are never above nitpicking faults and flaws. Despite tossing their first generation products to the sharks they perform uncharacteristically well for a new contender almost every time. They look before they leap.
The Corsair K60 and K90 were launched simultaneously and represent Corsair’s first attempt at producing a mechanical keyboard. Corsair has included media keys, a metal volume wheel, and a Windows-key lock on both keyboards if you find yourself yelling, “I HATE THIS KEY!” at your desktop because your game is now minimized and cannot receive your hatred.
Rubberized when down, not when up -- but stable either way.
I never said I wasn't one of the nitpickers.
Both keyboards are built around an aluminum chassis with a nonslip coating to each key. Each keycap has a sharply defined edges compared to the more round edges found on a Razer Blackwidow and other similar keyboards. Neither keyboard has rubberized tips on their ergonomic flaps although slipping has not been an issue in my testing.
Introduction and Features
Manufacturers are continually looking for ways to differentiate their products from the rest of the field and highlight new or improved features to make you want to buy their products. Leave it to Corsair to actually come up with a truly new and unique power supply for the PC enthusiast market! The Corsair AX1200i is a smart PSU that incorporates a Digital Signal Processor (DSP) to deliver extremely clean, efficient power with the ability to make real-time adjustments to various internal parameters. The included Corsair Link software can be used to monitor and adjust performance, noise (fan speed), and Over Current Protection (OCP) settings.
It’s been almost two years since we reviewed Corsair’s flagship power supply, the Professional Series Gold AX1200. While the new AX1200i retains many of the original features it now comes with 80 Plus Platinum efficiency certification and a built-in DACS (Data Acquisition and Control System) thanks to Corsair Link technology.
(Courtesy of Corsair)
Here is what Corsair has to say about their new AX1200i Digital ATX power supply unit: "The revolutionary AX1200i is the first desktop PC power supply to use digital (DSP) control and Corsair Link to bring you an unprecedented level of monitoring and performance customization. The DSP in the AX1200i makes on-the-fly adjustments for incredibly tight voltage regulation, 80 PLUS Platinum efficiency, and clean, stable power.
Real-time monitoring and control with Corsair Link. Put the AX1200i under your control by connecting it directly to a USB header on your motherboard with the included cable, or to a Corsair Commander (available separately). Then, download the free Corsair Link Dashboard software for unrivaled power supply monitoring and control options.
Monitor power input and output, efficiency, fan speed, and internal temperature, directly from the Windows based application. Or, take it to the next level and set up and modify fan speed profiles, or even select from virtual “single rail” or “multi-rail” software modes, with selectable OCP points. "
Corsair AX1200i Digital ATX PSU Key Features:
• Digital Signal Processor (DSP) for extremely clean and efficient power
• Corsair Link Integration for monitoring and adjusting performance
• 1,200 watts continuous power output (50°C)
• Dedicated single +12V rail with user-configurable virtual rails
• 80Plus Platinum certified, delivering up to 92% efficiency
• ZVS / ZCS technology for high efficiency
• Independent DC-to-DC converters
• Ultra quiet 140mm double ball bearing fan
• Silent, Fanless mode up to ~30% load
• Self-test switch to verify power supply functionality
• Premium quality components
• Fully modular cable system
• Conforms to ATX12V v2.31 and EPS 2.92 standards
• Universal AC input (90-264V) with Active PFC
• Over-current, over-voltage, under-voltage and short circuit protection
• Dimensions: 150mm (W) x 86mm (H) x 200mm (L)
• 7-Year warranty and legendary Corsair customer service
Introduction and Features
Earlier this year, SilverStone released two brand new enclosures designed for HTPC enthusiasts, the Grandia Series GD07 and GD08. The two cases are nearly identical except for the front panel and some differences in the internal drive cage layout. The GD07 sports a stealthy clean look with a lockable front door for security that conceals all the drives and I/O functions while the GD08 comes with a traditional exposed front and classic black anodized aluminum front panel. Both enclosures have been completely re-engineered and include the latest features like oversized motherboard and expansion card support, USB 3.0 ports, and excellent case cooling while being less expensive than some of SilverStone’s premium HTPC enclosures (the GD07 is currently selling for $139.99 and the GD08 is selling for $149.99 USD). We are taking a detailed look at the SilverStone GD07 HTPC case in this review.
SilverStone Technology was one of the original manufacturers to enter the HTPC case market and they continue to offer one of the largest selections of HTPC enclosures available today. SilverStone currently offers 18 different HTPC enclosures spanning three different series including the Crown, Grandia and Lascala lines. In addition to designing premium HTPC enclosures, SilverStone has a long-standing reputation among PC enthusiasts for providing a full line of high quality computer chassis, power supplies, cooling components, and accessories.
SilverStone Grandia Series GD07 HTPC Chassis Key Features:
• Full-size HTPC enclosure
• Positive air pressure design for excellent cooling with minimal noise
• Quick-access air filters helps prevent dust buildup
• Lockable front door and power button ensure system security
• Supports Micro-ATX, ATX and Extended-ATX motherboards
• Supports extended length graphic cards up to 13.6” long
• Four external 5.25" optical drive bays behind front door
• Five internal 3.5" and two internal 2.5” drive bays
• Excellent case ventilation with multiple dedicated vents
• Three 120mm cooling fans included
• USB 3.0 ports
Introduction and Features
Cooler Master is a well know name among PC enthusiasts and they are currently celebrating their 20th anniversary! In addition to a full line of PC enclosures, Cooler Master offers power supplies, coolers, and numerous accessories for mobile computing, notebooks, servers, and gaming. In this review we will be taking a detailed look at the new Cooler Master HAF XM enclosure, which is a very interesting mid-tower version of their popular HAF X series full-tower enclosure.
Here is what Cooler Master has to say about the new HAF XM enclosure: “The pure essence of the HAF X packed into a mid-tower size. The HAF XM supports up to four huge 200mm fans (Top x 2, Front, and Side), a large 140mm rear exhaust fan, and ample space for even the most demanding system builds. Liquid cooling support, an easy-access 90 degree rotated latched side panel, front HDD and SSD X-Docks, USB 3.0, and support for a hidden 2.5” HDD/SSD behind the motherboard tray make the HAF XM the ultimate setup for those that want enthusiast-grade features in a mid-tower package.”
Introduction, Features and Specifications
Thermaltake is a well known name among PC enthusiasts. They offer a full line of PC enclosures, power supplies, cooling equipment and accessories. Today we are taking a detailed look at Thermaltake's Dr. Power II Universal ATX Power Supply Tester. This is a second generation device that can come in very handy when you're trying to diagnose problems with your PC. A faulty or failing PSU can cause all kinds of problems (failure to startup, spontaneous re-boots, instability, etc.) and it can sometimes be difficult to know just what the source of the problem is. The Dr. Power II PSU Tester offers a quick and easy to use diagnostic tool to help confirm or rule out a bad power supply unit.
Thermaltake Dr. Power II Universal ATX PSU Tester Key Features:
• Designed from the ground up to support every ATX power supply available today, up to ATX12V v2.3
• Oversized LCD panel that accurately shows the value of each specific power rail, within one-tenth of a volt
• Accurate voltage indications for +12V, +5V, +3.3V, -12V, and +5VSB
• Built-in output connectors diagnostic system
• Low-voltage, high-voltage, no voltage, and PG alarm systems
• Easily troubleshoots system failure due to unstable power supply
• Built-in alarm system can notify user when the power supply demonstrates abnormal characteristics
Here is what Thermaltake has to say about their new Dr. Power II Universal ATX Power Supply Tester: "Dr. Power II is a fully automated power supply tester that enables users to easily and quickly determine if a power supply is defective or not; cutting overall troubleshooting time considerably. The oversized, easy-to-read LCD display and audible alarm helps users determine the exact cause of the failure, if there is one. An indispensible tool for any PC enthusiast or gamer!"
Introduction and Features
Enermax has a well earned reputation for delivering reliable power supplies, enclosures, and other accessories to the PC enthusiast market. Their new Platimax Series includes five power supplies ranging from 600W to 1200W. We will be taking a detailed look at the Platimax 1000W power supply in this review. All Platimax power supplies are certified to deliver 80 Plus Platinum efficiencies and feature modular cables and quiet operation. Ecomaster is the authorized US agent for Enermax branded products.
Enermax Platimax 1000W PSU Key Features:
• 89Plus Ready: World's leading modular cables PSU series with 89-94% efficiency @ 20-100% load. Compliant with 80 Plus Platinum standard.
• ErP Lot 6 Ready: Helps system meet ErP Lot 6 2010 (<1W at standby mode) with high efficiency +5vsb circuitry (with ErP Lot 6 enabled motherboard).
• High Compatibility Ready: Single rail +12V output highly compatible with various types of high-end graphics cards at full-load operation.
• 24/7 @ 50°C Ready: Non-stop industrial class performance at 50°C ambient.
• World Ready: 100-240 VAC universal AC input with Active PFC for Global usage.
• C6 & Hybrid Ready: Maximum compatibility with C6 & Hybrid states of current and future CPU & GPU generations by Zero Load design.
• DXXI Ready: 100% 6+2 pin (8P) PCI-E connectors to support new generation DXXI graphics cards.
• Future Ready: 12P modular design to support upcoming new CPU & GPU 10P and/or 12P connectors.
• Server Ready: SSI PSDG support for latest Intel Core Extreme/i7, Xeon and AMD Opteron and SLI or CrossFireX and downward compatible with EPS12V v2.92, v2.8.
• HeatGuard: Keeps PSU fan running for 30-60 seconds after shutdown to dissipate the remaining system heat and prolong system life.
• SafeGuard: Industry leading multiple protection circuitry for OCP, OVP, DC UVP, OPP, OTP, SCP, and SIP.
• SpeedGuard: World's leading patented fan control starting with unmatched 550 RPM to a maximum of 1500 RPM for optimal cooling and minimum noise.
• CordGuard: Fixing the AC cord tightly to receptacle to avoid accidental shutdowns of your PC.
• Dynamic Hybrid Transformer Topology: Technological breakthrough using a staged dynamic transformer array for extremely high efficiency with the most durable and stable output at any load.
• Twister Bearing Fan: 13.9cm Twister bearing fan with low noise and long lifetime (100,000 hours MTBF, Patented).
• 100% 105°C Japanese Electrolytic Capacitors: Highest component standards for maximum durability and stability.
Introduction and Features
SilverStone Technology was one of the original manufacturers to enter the HTPC case market and they continue to offer one of the largest selections of HTPC enclosures available today. SilverStone currently offers 18 different HTPC enclosures spanning three different series including the Crown, Grandia and Lascala series. In addition to designing premium HTPC enclosures, SilverStone has a long-standing reputation among PC enthusiasts for providing a full line of high quality computer chassis, power supplies, cooling components, and accessories.
(Courtesy of SilverStone)
The Crown Series CW02 HTPC chassis that we will be taking an in depth look at in this review is a beautiful enclosure capable of housing a full, high-end gaming system or media server and provides internal storage for up to six HDDs and comes with a built-in multifunction LCD display and remote control. The all aluminum alloy CW02 features elegant styling and is available with either a black or silver (clear) anodized finish, which is sure to blend in and compliment your other high-end, audio-video equipment.
Over the past several months I have received several inquiries from readers asking about a HTPC enclosure that is capable of housing a high-end gaming system or multi-media server. As one reader wrote; "I'm looking for a large, high quality HTPC case that will let me install my dual purpose gaming system and media server. It needs to have plenty of room for a full size ATX mobo, dual graphic cards, a large PSU, good case cooling and at least 5 internal 3.5" drive bays (four HDDs and one SSD)." At first glance it appears the CW02 may be just what this reader is looking for. Later on, we are going to install a high-end gaming system (water-cooled Intel i7 CPU, dual GTX680 graphics cards, 1000W PSU, and 12 Terabytes of storage space) into the CW02 enclosure; this should be fun.
A case for quiet and for performance
In recent years, some of my favorite cases have come from Corsair - a statement that not too long ago I would have never thought I'd be making. Since the company's rapid expansion into nearly all things enthusiast computing, the Corsair Obsidian line of chassis have helped move along a pretty stagnant industry and foster innovation and change.
Today we are going to be looking at the new Corsair Obsidian 550D, a case that claims to master both noise reduction and sound isolation as well as offering flexibility for some intense cooling capability.
Check out our video review below!
Overall we found the 550D to be a great case for the money and the ability to run it in both a quiet and a cooling mode will allow users to swap components and PC designs without having to buy another case at the same time.
Introduction and Features
Antec has one of the largest selections of PC power supplies on the market today and their new HCP-1000 Platinum power supply features 1000W of continuous output power and is 80 Plus Platinum certified. The High Current Pro Platinum is the first power supply in a new series that will replace three existing lines, the TruePower Quattro, High Current Pro (80 Plus Gold), and Antec’s Signature series. The High Current Pro Platinum series will be the new top class of maximum efficiency within Antec’s range of power supplies with modular cabling.
The HCP-1000 Platinum is based on a brand new platform, co-developed with Antec’s partner Delta Electronics and combines several new technological developments and features to provide unmatched performance and be the very best power supply possible. The HCP-1000 Platinum incorporates all modular cables with six PCI-E connectors, NVIDIA SLI-Ready certification, ErP Lot 6:2013 compliance, a 7-year warranty and it is being introduced with a MSRP of $269.90 USD.
Here is what Antec has to say about their new HCP-1000 PSU:
“Antec's High Current Pro Platinum series is the pinnacle of power supplies. High Current Pro Platinum is fully modular with a revolutionary 20+8-pin MBU socket for the needs of tomorrow. By using a PSU that is 80 PLUS® PLATINUM & ErP Lot 6: 2013 certified, operating up to 94% efficient, you can reduce your electricity bill by up to 25% when compared to many other power supplies. HCP Platinum's innovative 16-pin sockets create a new level of flexibility by doubling the modular connectivity, supporting two different 8-pins connectors and even future connectors of 10, 12, 14 or 16-pins. Backed by a 7 year warranty and lifetime global 24/7 support, the HCP-1000 Platinum embodies everything a power supply can accomplish today.”
Antec High Current Pro Platinum 1000W PSU Key Features:
• 1000W continuous power output at 50°C
• 80 Plus Platinum Certified (up to 94% efficient)
• Four High Current +12V rails with high maximum load
• 100% +12V output for maximum CPU and GPU support
• Quiet 135mm double ball bearing fan
• Thermal Manager – advanced low voltage fan controller
• All Japanese brand, heavy duty capacitors
• PhaseWave Design server-class, full-bridge LLC topology
• NVIDIA SLI-Ready certified (six PCI-E connectors)
• Active PFC with Universal AC line input
• ErP Lot 6:2013 Compliant
• Fully modular sleeved cables
• Protection: OCP, OVP, UVP, SCP, OPP, OTP, SIP, NLO and BOP
• Antec AQ7 7-year warranty and lifetime global 24/7 support
Introduction and Features
SilverStone was one of the first PC power supply manufacturers to design and market a fanless power supply for silent operation. While many of their competitor’s fanless products have come and gone, SilverStone continues to build on their reputation and later last year released the SST-ST50NF 500W fanless power supply, which is the latest addition to the Nightjar series. We are a little late to the party in reviewing the ST50NF but after talking with the good folks at SilverStone it appears the wait was worth it as they have continued to tweak the design in recent months to improve AC ripple suppression on the DC outputs.
Here is what SilverStone has to say about the Nightjar 500W fanless power supply: The fanless Nightjar series power supplies are long favorites for professionals and enthusiasts alike that require noiseless power solution with no moving parts. With increasing power demands required from modern computers, SilverStone engineers have once again created another fanless power supply with leading output level in ST50NF. With 500W of continuous rating, near 80Plus Silver efficiency, ±3% voltage regulation, single +12V rail, multiple PCI-E connectors, and full host of safety features, the ST50NF is a great choice for mission-critical systems that need to operate in noiseless or dusty environments.
SilverStone Nightjar 500W Fanless PSU Key Features:
• Fanless thermal solution,0 dBA Acoustics
• 500W continuous power output
• 80 PLUS Bronze certified with84%~88% efficiency at 20%~100% load
• Compliance with ATX 12V v2.3 and EPS 12V Specifications
• Strict ±3% voltage regulation
• PCI-E 8-pin and PCI-E 6-pin connectors
• Powerfull class-leading single +12V rail (38A)
• Aluminum construction
• Server-level components
• Universal AC input (100~250V) with Active PFC
Editor’s Note: Fanless PC power supplies occupy a niche market and are targeted towards users who want a silent power supply for use in noise-sensitive areas or who need a power supply that can survive in a dusty/dirty environment that might choke and kill a conventional fan cooled PSU. Fanless power supplies rely on convection cooling and still require airflow in and around the power supply chassis to carry away the waste heat. So while the power supply itself may not have a fan, the computer enclosure must still have some means of creating airflow to keep the CPU, GPU and PSU cool. The last thing you want to do is put a fanless PSU in a closed enclosure without any fans or airflow!
Introduction and Features
Kingwin has just released the fifth and most powerful unit in their top-of-the-line Lazer Platinum Series, the LZP-1000. As you might guess, all of the Lazer Platinum Series power supplies are 80Plus Platinum certified, which means they should deliver top efficiency (up to 90%, 92% and 89% efficiency @ 20%, 50% and 100% load). The LZP-1000 PSU we have up for review comes with a full compliment of fixed and modular cables, a very quiet 140mm fan and includes universal AC input with Active PFC. A new feature found on the LZP-1000 is the ability to run in fanless mode at low to mid power levels thanks to Kingwin's ECO Thermal Control System and 2-way Thermal Control switch. The LZP-1000 is designed to support the latest Intel and AMD processors along with multiple high-end graphic adapters (Crossfire/SLI/3 Way SLI).
Kingwin LZP-1000 PSU Key Features:
• 1,000W total continuous power; Easily Overclocked to 650W
• 80 PLUS® Platinum Certified: 90%, 92% and 89% Efficiency @ 20%, 50% and 100% Load
• 140MM Fan with Intelligent Auto Fan Speed Control
• ECO Intelligent Thermal Control System (Patent)
• 2-Way Thermal Control switch (fanless at low power or fan on all the time)
• Supports Intel Core i7-980X/Core i7/Core i5/Core 2 Quad/Core 2 Duo and
• AMD Phenom II x6/Phenom II X4/Phenom II X3/Athlon 64 X2 CPUs
• Compliance with ATX 12V v2.2, EPS 12V v2.91, and SSI EPS 12V v2.92 Specifications
• Crystal Cube Modular Plugs w/ Patented Power Connector Cable Management System
• Six PCI-E 6+2 pin connectors to support high-end graphic cards
• Stable +12V current; 83A (996W)
• Over Power/Under Power/Over Voltage/Short Circuit Protections
• Universal AC input (115V ~ 240V) with Active PFC
• 5-Year warranty
Introduction and Features
SilverStone's new Strider Gold Evolution series power supplies include four models: 750W, 850W, 1000W and 1200W, which are based on the original Strider Gold series. SilverStone engineers have tweaked the design to improve both efficiency and performance and they replaced the original fan with a SilverStone Air Penetrator fan with fluid dynamic bearings to make it even quieter. The Strider Gold ST1000-G Evolution that we have up for review today is rated for 1000W DC output and is 80 Plus Gold certified. It comes with a full compliment of all modular cables, including dual EPS connectors and six PCI-E connectors for multiple high-end graphics adapter support. SilverStone also includes one of their new 140mm magnetic fan filters to help reduce dust buildup inside your PC.
Here is what SilverStone has to say about their new Strider Gold Evolution 1000W power supply:
“To make great power supplies even better, SilverStone engineers delved into the details with the Strider Gold series. In order to reduce the already low noise generated by the Strider Gold, they replaced the fan with SilverStone’s own Air Penetrator, which has superb cooling ability and is equipped with fluid dynamic bearings. This allowed for reprogramming of the fan controller to enable lower fan speed at any given loading condition compared to the predecessor. Various components were also re-tested and replaced with newer versions for minor boost in efficiency and performance. An excellent FF141 fan filter with magnets is even included in the package for use to reduce dust buildup.
With the fan and component upgrades, the Strider Gold Evolution series will again encompass wattage range from 750W to 1200W with 80 PLUS Gold level efficiency, ±3% voltage regulation, low ripple & noise, and high amperage single +12V rail as its main features. For discerning users looking to get a top-notch power supply with all features covered and more, this is the perfect solution.”
SilverStone ST1000-G Evolution PSU Key Features:
• 1,000W 24-Hour continuous power output (1,100W Peak)
• 80 Plus Gold certification: 87%~90% at 20%~100% loading
• Ultra silent 139mm Air Penetrator fan with fluid dynamic bearings
• SilverStone FF141 magnetic fan filter included
• 100% Modular cables
• Class-leading single +12V rail with 83A
• Strict ±3% voltage regulation and low ripple and noise
• Japanese made main capacitors
• Dual EPS 8-pin connectors
• Multiple PCI-E connectors (8-pin and 6-pin)
• Capacitors attached to PCI-E cables to reduce electrical noise
• Supports ATX12V 2.3 and EPS12V
• Active Power Factor Correction
Introduction and Features
Seasonic has an excellent reputation for producing quiet ATX style PC power supplies with high efficiencies and stable outputs. However, Seasonic also has a full line of server style power supplies in both 1U and 2U form factors. In this review we will be taking a detailed look at their new SS-350M1U server style power supply, which features 80Plus Gold efficiency certification, active PFC, and modular cables. It will be interesting to see how this industrial grade unit compares to the more familiar ATX style power supplies built by Seasonic.
Seasonic SS-350M1U Main Features:
• EPS 1U Form Factor, 350W
• ATX12V v2.31 & EPS12V compliant
• Supports the latest Intel & AMD sockets/CPUs
• 80Plus Gold efficiency certification
• DC to DC converter design
• Low ripple & noise
• Super low noise fan control
• Short circuit protection on all outputs
• Over voltage and Over power protection
• 100% hi-pot test & 100% burn in, high temperature cycled on/off
Introduction and Features
SilverStone has a long-standing reputation among PC enthusiasts for providing a full line of high quality enclosures, power supplies, cooling components, and accessories. In 2006, SilverStone introduced the Temjin TJ08, an impressive Micro-ATX tower case with dual 120mm cooling fans. It helped pioneer the idea of large tower cooling performance in a small package. Today, improved technology and the latest designs have enabled SilverStone engineers to create another innovative small tower case in the TJ08-Evolution with even better cooling performance than the original. The SilverStone TJ08-E is a premium enclosure designed specifically for SFF motherboards and features a beautiful black anodized aluminum front panel, excellent cooling performance, removable sides, top, and motherboard tray, and it packs a lot of storage capacity into a small tower chassis.
(Courtesy of SilverStone)
To improve cooling performance, a SilverStone "Air Penetrator" 180mm fan has been installed behind the front panel to create a virtual airflow tunnel through the chassis with positive air pressure. This is a two-speed fan with a small, easily accessible speed selector switch mounted around on the side of the front I/O panel. SilverStone claims that by designing the TJ08-E with the positive air pressure concept, it enables better cooling performance than traditional chassis but also helps to prevent dust from penetrating into the chassis by use of a large, easily accessible filter on the intake fan and forcing air out of the chassis through unfiltered openings. A standard ATX power supply can be installed in a dedicated compartment, which features a top mounted air intake grill covered by a magnetic dust filter.
Rosewill produces a whole lineup of products with seemingly incongruous variety. You can get matching brands for your blood pressure monitor, your wine opener, your DSLR bag, and your computer power supply. The vast majority of Rosewill's distribution flows through Newegg.
Their RK-9000 mechanical keyboard was manufactured by CoStar under the Rosewill branding. With that product, they brought a high quality mechanical keyboard to North America for a very decent price of just under a hundred dollars. For what might as well be considered a Filco keyboard, that is an outstanding price. It did not have media keys; it did not have backlighting; but it was a solid keyboard which felt great to type on and had outstanding performance.
Check out our video review of the Rosewill RK-9000 second generation and read on for the written review
At some point Rosewill decided to discontinue the RK-9000 without an official announcement. Beyond a sudden and sustained drop in availability, there was no evidence that the keyboard was no longer produced. A few silent months went by until Rosewill officially announced a second generation of RK-9000 mechanical keyboards. It was then clear why the RK-9000 was discontinued: it was being replaced and updated.
We were approached by the company to conduct a review of their recently released mechanical keyboards. Included was not just the Cherry MX Blue switched RK-9000, but also its three newly introduced siblings: the MX Brown switched RK-9000BR, the MX Black switched RK-9000BL, and the MX Red switched RK-9000RE. A little under three months ago we have received the review units and have been in the process of testing them ever since.
What Rosewill was unaware of was that I am a proud owner of the original RK-9000 keyboard. This review is more than a review of Rosewill’s new products, but also will be a comparison between the new product and their original offering. Despite sharing a Newegg product page with its ancestor, the new keyboard is not identical. For good measure, I also have a Razer BlackWidow Ultimate lying around -- slightly dilute the oversaturation of the letter R in tested product names… albeit, not the company names.
A new contender has enterkeyed.
If you happen to have an original RK-9000, is it time for an upgrade? If you are interested in all of the hoopla about mechanical keyboards, is this the correct time and place to dive in?