Intel X25-M 'G2' TRIM Enabled Firmware and SSD Toolbox Review
Testing Methodology and System Setup
Specific for this review:
I will be testing the new firmware using the 'old' SSD method as well as a 'new' method meant to see performance of a drive in a constant state of TRIM. All values will be obtained from the XP X64 testbed. Windows 7 was used to TRIM the drive between benches.
Our tests are a good mix of synthetic and real-world benchmarks.
PCMark, IOMeter, HDTach, HDTune, Yapt and our custom File Copy test round out
the selection to cover just about all bases. If you have any questions
about our tests just drop into the Storage Forum and we'll help you out!
Test System Setup
We have switched our testbed over to a more dedicated, forward
thinking machine. We made some changes to help minimize test data
scatter with higher bandwidth devices. Sound is flat out disabled,
with no additional card installed. Video was *intentionally* shifted
to a PCI unit to free up both PCIe-16 slots for testing tandem pairs of
PCI Express cards (like ioDrives and high end RAID cards). Spot checks
against the previous rig showed a negligible change in test output.
PC Perspective would like to thank ASUS, Corsair, and BFG for supplying some of the components of our test rig.
|Hard Drive Test System Setup|
|CPU||Intel Core i7 920 @ 4 GHZ (HT disabled)|
|Memory||Corsair Dominator 6GB DDR3-1600|
|Hard Drive||G.Skill 32GB SLC SSD|
|Video Card||BFG Geforce 8400 GS 512MB PCI|
|Video Drivers||Geforce 181.22|
|Power Supply||Corsair CMPSU-650TX|
|Operating System||Windows XP X64 SP2 | Windows 7 X64|
- PCPer File Copy Test
Get notified when we go live!