Review Index:
Feedback

Intel Atom Z2760 Clover Trail Details - An SoC Built for Tablets

Author:
Subject: Processors, Mobile
Manufacturer: Intel

Hardware Specifications

Ahead of the release of Windows 8 and the onslaught of Windows 8-based tablets that will hit the market next month, Intel is taking the cover off the processor that many of these new devices will be powered by, the Intel Atom Z2760 previously known by the codename of Clover Trail.  Intel is claiming that the Atom Z2760 is the beginning of a completely new Atom direction, now a complete SoC (system-on-a-chip) design that lowers power requirements, extends battery life and allows Intel's x86 architecture to find its way into smaller and more portable devices. 

View Full Size

At it's heart, Clover Trail is based on the same Saltwell CPU core design that was found in the Medfield processor powering a handful of smartphones over in Europe.  That means the Atom lineup remains an in-order architecture with a dual-issue command structure - nothing incredibly revolutionary there. 

View Full Size

Unlike Medfield though, the Atom Z2760 is a dual-core design that still enables HyperThreading for four-threaded operating system integration.  The cores will run at 1.8 GHz and it includes 1MB of L2 cache divided between the two cores evenly.  Memory is connected through a dual-channel 32-bit bus to low power DDR2 memory running at 800 MHz and capacities up to 2GB. 

Continue reading our information on Intel's Clover Trail Atom Z2760 SoC!!

Clover Trail supports a new feature called Burst Technology which is related to Turbo Boost found on Intel desktop processors, allowing the CPU cores to run at higher clock speeds and higher power consumption for short periods of time for on-demand performance increases.  This should allow the Z2760 processor to spike performance when certain applications demand it to avoid stuttering and poor user experiences.  Because of the targeted form factor this feature will obviously be more limited than what Ivy Bridge can do.

For graphics processing, the Atom Z2760 will utilize a PowerVR design, the SGX545 - running at 533 MHz and support for DX9.3L.  While previous reports did claim that Clover Trail would support DX10, that didn't make the cut and Intel instead decided to lean in with the minimum required specifications for Windows 8 support.  The SGX core is the same one used by many other SoCs including the Apple A-series chips in the iPhone 4 and the Texas Instruments OMAP powering the Galaxy Nexus.

Image processors for hardware accelerated video encoding and decoding are included, support for cameras with 8MP sensors and 1080p video will all run on Z2760 powered devices. 

Another big change from other Intel processors is the migration to low power I/O connections - GPIOs, I2C, UART and more are included (as they were for Medfield) in addition to standard USB 2.0 channels to allow for lower power communications with radios and touch input devices. 

Clover Trail will be built on Intel's 32nm High-K Metal Gate technology NOT on the 22nm process that is currently powering the Ivy Bridge based desktop parts.  Intel normally has the advantage in process though both Samsung and TSMC are currently running 32nm processes as well powering quite a few other SoCs. 

View Full Size

The result of all of this hardware is the ability to build platforms that look something like the one above.  Intel built reference platforms that include all the required hardware for the Clover Trail platform and sent them off to partners to help direct design goals.  Having used this hardware first hand I can tell you that it was quite impressive - light weight yet with a great screen and highly interactive interface.  In the press release Intel claims that Clover Trail enables designs that are "as thin as 8.5mm and as light as 1.5 pounds" - enables, sure, but we'll wait to see how the market pans out next month. 

View Full Size

One of big improvements for Windows 8 over previous Windows operating systems is the addition of a connected standby mode that enabled quick, low power bursts of communication that enables the "always on" experience without using dramatic amounts of stored battery life.  Current Android and iPhone do this very well - if you have ever gotten a push notification for an email while the phone is in a sleep state then you have experienced a "connected standby" system.

While all current ARM-based SoC designs are developed with connected standby in mind, Medfield and Clover Trail are among the first Intel designs to plan for it.  Intel demonstrated the power benefits of the Atom Z2760 to us with some diagrams that showed the power management structures.

View Full Size

Above you'll see the power consumption and heat distribution while Clover Trail is in an active state (S0).  The two Saltwell CPU cores are chugging along while the graphics, image processing and display controllers are noticeably "quieter."

View Full Size

This image shows a C6 state - the traditional low-power CPU mode that Windows and current processors have supported.  While the Saltwell cores are powered down quite nicely the rest of the SoC is still consuming more power than is necessary for connected standby to function.

View Full Size

Here is the Clover Trail SoC at a compete idel state (S0i3); only the power management blocks at the top of the die are active, waiting for the wake commands to operate on incoming data or to prepare the rest of the silicon for further action.  Intel claims that at this state the Atom Z2760 will use less than 2 mW of power.

September 27, 2012 | 06:43 PM - Posted by Anonymous (not verified)

SGX545??!?!?!??!?!

WTF Intel!!! No.... NO.... NOOOOOOOOOOOOOO!!!!!!!!!

This is TERRIBLE news for developers of 3D applications hoping to run on Windows 8 tablets. Now not only do we have to tell users "NO ARM" and "NO WINDOWS RT", we also need to say "NO ATOM". Thanks a lot, Intel. Thanks.

September 27, 2012 | 07:57 PM - Posted by Ryan Shrout

Do you have some more specific complaints?  I would love to hear about it...

September 28, 2012 | 03:06 AM - Posted by Dudedog (not verified)

Is there anything good about agx545, I would like to hear it. Better garbage is ...... garbage.

October 1, 2012 | 06:37 AM - Posted by Anonymous (not verified)

I agree. I have a netbook with said graphics and the drivers just plain suck. Where's DirctX 10? Where's the 2D acceleration? I can't play Cave Story or Notrium at full speed, and frankly, that's pathetic. Maybe in the future the SGX545 will be worthwhile on Windows, but for now, forget about it.

September 28, 2012 | 06:30 AM - Posted by Anonymous (not verified)

Last time Intel pulled this crap, with the GMA500 (SGX535), the drivers were horrendous. Completely unusable. Intel contracted out the driver development to a third party that obviously had no idea what they were doing, no incentive to get it right, and somehow Intel got Microsoft to allow this. Those tablets based on Atoms with GMA500 were quickly pulled from the market and fortunately few consumers ended up falling into this trap. But this time there is much greater potential for disaster.

Mark my words. Any tablet based on this CPU will be a dark stain on the history of x86 tablets running Windows.

December 2, 2012 | 11:22 AM - Posted by Hassan (not verified)

Right, people do not buy tablets with this processor especially if your looking for a laptop replacement buy the surface pro tablet from microsoft it has a intel ivy bridge i5 processor and HD 4000 graphics. ans it will cost around 900 pound for the 128gb with type cover

December 4, 2012 | 12:31 PM - Posted by Adel Seghir (not verified)

I'm no Intel freak. However, I just don't get the teenage comments.

If gaming is your life, commenters, then go get a gamer's rig and leave us alone. For the rest of us, the good news is, low-power, long-lasting tablets with Win8 are here at long last (how can any real work be done on an iPad? No file system to begin with?).

Gaming means burning power. Some guys just don't get it. Dumb. Kids, go get a full-power rig, eat your cereals, and don't disable parental control please.

- AS

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.