AMD Llano APU Displayed at GlobalFoundries Technology Conference
The first for AMD
For the past several years AMD has been placing “Fusion” logos on all of
their marketing presentations, and it all started after the
announcement that AMD would be integrating ATI graphics technology onto
their CPUs. It was initially announced that we would have Fusion based
parts in 2009, but it seems the laws of physics and die size got in the
way. Now as we are heading into 2011, we are actually going to see the
fruits of the initially controversial merger of AMD and ATI.
Ontario is the codename for the Bobcat based Fusion part which
integrates a dual core processor with a DX11 based graphics portion.
This part was presented for the first time at Computex in early June,
and AMD has ramped production on these parts for a late 2010 release to
manufacturers. Ontario is a slightly different bird than we were
expecting. While it was well known to be based on the new Bobcat
processor architecture, it was assumed to be produced by GLOBALFOUNDRIES
on their 32 nm SOI process. It was a bit of a shock when it was
announced that this part would in fact be initially produced by TSMC on
their 40 nm bulk process.
The second product in the Fusion family is known as Llano. This is
going to be the wagon that AMD really will hitch their desktop
aspirations to. It is a design that is based on compromise, but this
was needed for this new and complex part. It will be using
GLOBALFOUNDRIES’ new 32 nm SOI/HKMG process, which is being ramped quite
aggressively to meet 1H 2011 goals.
The processor core is based on the Phenom II architecture, but with a
few twists. It features no L3 cache, but it increases individual L2
caches to 1 MB a piece. There are supposed to be a handful of tweaks to
the processor as compared to the 45 nm variants. AMD has yet to really
categorize these tweaks, but it probably concerns cache coherency
efficiency since there is no shared L3 for the four cores to lean upon.
GlobalFoundries' Doug Grose holds the 32nm AMD Llano wafer
The memory controller and northbridge functionality has received a
massive makeover due to the increased data needs of an onboard graphics
component. Again, the details of the changes will not be made public
until much closer to the release of this product. This upgrade in the
memory controller will likely not have a large effect on CPU
performance, but it was certainly necessary to feed the GPU. It will
still be a dual channel, DDR-3 implementation, but with official support
for higher DDR-3 speeds.
The graphics portion is still a relative unknown. Some guesses have
been put forward as to its composition, and most of these are based on
the somewhat blurry die shot that has been making the rounds for
months. What we do know is that it is a DX11 part. That is the only
What can be surmised due to the timing of the design phase is that
it is based on the current HD 5000 series of graphics parts. This means
that it is most likely not based on the improved “Southern Isles”
designs which are going to be released in the near future. It looks to
have around 480 stream units, which is one SIMD (80 stream units) larger
than the current Redwood GPU that powers the HD 5500 and HD 5600
parts. The chip is going to have multiple clock domains, so the CPU
core will run into the 3 GHz range while the GPU portions could see
anywhere from 750 MHz to 1 GHz (or potentially slightly higher due to
the process it is based upon).
For comparative purposes, the current integrated graphics portions
of AMD’s class leading chipsets are based upon a single SIMD design (80
stream units) running between 500 MHz and 750 MHz. These parts are
based on TSMC’s 55 nm process, so the new graphics portion of Llano is
1.5 nodes newer. This has allowed AMD to fit a whole bunch more stream
units into an area that was typically reserved for the L3 cache on the
AMD Llano APU Die Shot
The die size overall on the Llano part should be between 170 mm
squared and 210 mm squared, based on rough estimates comparing the die
size of the 45 nm Phenom IIs with the full L3 cache. It should be an
improvement for AMD in terms of manufacturing, but it certainly is not
as efficient as their native 45 nm dual core design with 1 MB of L2
cache per core or the Athlon II X4s.
With the recent leaks of Sandy Bridge performance, we know that
Llano will not be all that competitive on the CPU side. Certainly it
will be an improvement over the current Phenom II parts (just barely),
but it will get nowhere near Nehalem or Sandy Bridge performance. AMD
is not terribly worried about that right now, as they feel the graphics
performance will be more than enough to overtake what Sandy Bridge
brings to integrated GPUs.
This is not to say that Sandy Bridge is a disappointing improvement
in integrated graphics. Intel has really kicked it up a notch, and the
low end integrated part (with what Intel calls 6 stream units) doubles
performance over the previous Intel Extreme graphics as well as AMD’s
880/890GX integrated parts. Intel has a 12 unit part that will be
integrated into the higher end of the spectrum of Sandy Bridge chips.
It may not double the performance of the integrated graphics, but it
will certainly improve it to a significant degree (it may be more memory
AMD is hoping that this robust 480 stream unit part will provide
near HD 5650 performance. This would be a very significant boost over
what Intel offers, plus solid DX11 support due to the GPU being from a
well known graphics architecture. I do question whether this part will
be more bandwidth bound in most situations, and if performance will be
limited by that. The HD 5670 has a very respectable 64 GB/sec of
available memory bandwidth. Compare this to a dual channel DDR-3 1600
controller in Llano that can theoretically do 25.6 GB/sec. In the real
world, AMD’s CPUs have been able to get 13 to 16 GB/sec on current
processors. The graphics portion may help to better utilize that
bandwidth, but it will be a tough hill to climb.
What the GPU does promise though is better graphics performance,
better quality rendering, and access to stream computing resources once
reserved for a standalone GPU. AMD is betting that in most user related
cases, the CPU will be of secondary importance to the GPU. When
dealing with standard desktop applications and gaming, a faster GPU will
trump the CPU. Plus with the growing GPGPU market, it will be a
compelling sell for a lot of OEMs and consumers alike. Also consider
that the GPU portion will feature all the AVIVO HD functionality, as
well as an assumed ability to bitstream HD audio.
It does appear as though Intel will have Sandy Bridge out well
before AMD is able to ship Llano. But AMD really is hoping that the
more advanced graphics portion will offset the lead time, as well as CPU
performance advantage that Intel holds.
Get notified when we go live!