This content was originally featured on Amdmb.com and has been converted to PC Perspective's website. Some color changes and flaws may appear.

Iwill’s products have been around for a good while, even if you haven’t heard of them. They were the originators of the onboard SCSI and onboard IDE RAID solutions, for both AMD and Intel solutions. In fact, an interesting note is that Iwill offers an IDE RAID and non-RAID solution for every motherboard they manufacturer.

Click to Enlarge

When Iwill contacted me about sending me a motherboard to review, I was bit skeptical due to fact that their products are a bit lower key than the big boys like Asus and Abit. I think with the release of the KT133A chipset motherboard, the KK266, is going to change all of that. Perhaps a bit too optimistic? Judge for yourself after reading the full review.

Let’s start with some stats:

Motherboard Specifications

CPU Socket

Socket A (133/266 DDR MHz Support)

Chipset

VIA KT133A

Form Factor

ATX

Multiplier Options

Up to 12.5x

Bus Speed Options

100 - 166 MHz in 1 MHz intervals

Voltages

1.5 - 1.85v in 0.025v increments

Memory Support

3 x 168-pin SDRAM PC100/PC133 Support

Expansion Slots

6/1/0/1 (PCI/ISA/AMR/AGP)

AGP Support

4x AGP

USB Support

2 Standard USB ports

Expansion for additional 2 ports

Bios

Award Bios Flash ROM

Onboard IDE

2 x ATA100 EIDE