Introduction and Technical Specifications

The Bitspower AIX99R5E Nickel Plated Full Cover Block integrates liquid-based cooling for the chipset and VRMs on teh ASUS Rampage V Extreme motherboard…

Introduction

Courtesy of Bitspower

The Bitspower AIX99R5E Nickel Plated water block set is a set of full cover blocks for cooling the X99 chipset and CPU VRMs on the ASUS Rampage V Extreme motherboard. The block set is split into two parts, a block for the CPU VRM circuits and a block / cover plate for the chipset area. Each block has two G1/4" threaded ports for coolant inlet/outlet.

Courtesy of Bitspower

Courtesy of Bitspower

The blocks are held to the board using screws through the board bottom and using the pre-existing cooler mounting holes. Thermal tape is used in between the VRM chips and the block. The chipset block uses thermal paste to interface with the board's chipset surface. The chipset block covers the left side of the board with fingers that sit in between the PCIe ports.

Technical Specifications (taken from the Bitspower website)

Dimension N+S
( LxWxH )
212m x 161mm x 26mm
Dimension MOS
( LxWxH )
104.7mm x 23.5mm x 26mm
Thread G1/4" x 2
Included 1. Backup O-Ring x 1Set.
2. Thermal PAD Included.
3. Mounting Screws/Accessories.

Continue reading our review of the Bitspower AIX99R5E Nickel Plated Full Cover Block!

« PreviousNext »