Review Index:

AMD A8-3850 Llano Desktop Processor Review - Can AMD compete with Sandy Bridge?

Author: Ryan Shrout
Manufacturer: AMD

Memory Speed and its Effect on Graphics Performance

If you were curious like I was, you probably noticed that AMD is claiming support for DDR3 memory speeds as high as 1866 MHz.  And while the 1866 MHz spec is only actually supported with one DIMM in each channel, that is significantly higher than the 1333 MHz speed that Intel's Sandy Bridge processors (and AMD's own previous processors) run at by default.  Considering the memory controller on Llano and Phenom II are at the least VERY similar to each other (with some modifications made for support of the SIMD array that is the GPU) it begs the question of why AMD would want to push the line that far.

As it turns out, there is a very good reason for it.  A much smarter man that I once said that GPU performance can and does scale nearly linearly with memory bandwidth, all else being equal.  You can always build a GPU with enough shaders to handle more available memory bandwidth.  Consider that the AMD Radeon HD 6970 2GB graphics card has an available bandwidth of 176 GB/s to its discrete GPU while, as you saw on the memory benchmark in our SiSoft Sandra results, the AMD A8-3850 was rating at about 14 GB/s with a theoretical peak of ~ 29 GB/s according to AMD's own documentation.  That is much lower than even the slowest discrete graphics cards (64 GB/s on the HD 6670) and is why even seemingly benign increases in DDR3 memory speed on the AMD APU can result in some impressive and noticeable changes.  

For this test we ran our Corsair Dominator DDR3 memory modules at three settings:

  • 1333 MHz 7-7-7-20
  • 1600 MHz 7-7-7-20
  • 1866 MHz 9-9-9-24

We ran the same graphics performance tests as we did on the previous page at the exact same settings to see if overclocking our memory would actually make a playable difference in the games.  Turns out it does.

Just to be fair, I also decided to take the Core i3-2100 processor with the HD Graphics 2000 and try it at both the 1333 MHz setting and the 1600 MHz overclocked option to see if the Intel platform might scale as well.  Details below!

View Full Size

View Full Size

View Full Size

View Full Size

First thing to notice - the Intel Core i3 processor's gaming performance did NOT scale as we increased the memory speed on the platform.  The fact that AMD's did improve then indicates a much different memory system at work between the processors.  It was well known that Intel's use of a shared cache between the CPU and GPU has helped it boost its performance over previous generations but it seems that AMD's tactic of allowing the GPU direct access to memory might have its advantages as memory technologies improve as well.

Look at those AMD results, the differences are actually quite impressive.  The boost from 1333 to 1600 MHz produced the most dramatic results though the jump to 1866 MHz (but at slightly slower timings) still brought performance up.  The fact that we got a 25% boost in gaming performance in StarCraft II and 16% gains in both Dirt 3 and Civ V means that making a few basic changes to your Llano system can result in tangible and worthwhile gaming advantages.  

This also means a return to the world of memory overclocking that many of you might have thought was gone for good.  The days of recommending "overclocking" types of memory for me were previously over as I found myself telling people that stock 1333 MHz memory was good enough and overclocking didn't result in many performance gains.  Now, if you are buying an AMD A-series system and can get higher speed memory for the same or similar pricing, it seems like a no brainer to go that route and take advantage of these findings.

October 31, 2011 | 08:11 PM - Posted by Bovinebill (not verified)

I think you have missed the whole point of buying an a-series APU.

If you want better performance that what the inbuild 6550 and a pci 6670 card will give you, then just dont bother buying the A-series APU.

Get yourself a decent AMD X4 or X6 chip instead and a motherboard that support AM3 chips.

These chips are faster the the A-series and will team up better with the higher end graphics cards.

November 18, 2011 | 07:33 AM - Posted by Anonymous (not verified)

This review is bullshit.
You can't overclock llano more than 3-5%
All you are doing is changing a number with your "overclocks", benchmark and see.

December 14, 2011 | 03:37 AM - Posted by Jhangir (not verified)

This processor is perfect for me. Low price and reliable performance. and discrete level dx 11 and grafichs.

December 18, 2011 | 03:21 AM - Posted by Kaupo (not verified)

this is the future of protcessors!

January 11, 2012 | 12:02 AM - Posted by Anonymous (not verified)

I just installed an amd a8-3850 processor, and i was wondering what is the best discrete graphics card to use dual graphics with my cpu. i have been looking at the Visiontek 900485 Radeon HD 6670 Video Card.

appreciate any help :)

January 11, 2012 | 01:08 AM - Posted by Anonymous (not verified)

im thinking the most likely card i will buy is the DIAMOND 6670PE32G Radeon HD 6670 2GB 128-bit GDDR3. its a little bit cheaper. and more likely to fit in my case

January 21, 2012 | 01:50 PM - Posted by Anonymous (not verified)

I don't think that card will work in Crossfire X. I just got it today, and have spent literally hours trying to get it to Crossfire with A8-3850. I have all drivers installed and still cannot enable the Crossfire on AMD Vision Control Center. I am pretty savvy, but cannot figure it out. Diamond doesn't even list this card on their site anymore. Think they are running from this problem, instead of tackling it!

September 24, 2012 | 04:25 PM - Posted by geniusthmaster (not verified)

hey my bios doesnt have those options im running a laptop and i need to undervolt and overclock. can u shed some help? i may consider attempting e the fact flashing your bios over mine, despite the fact that ill most likely render my pc useless.

September 24, 2012 | 04:26 PM - Posted by geniusthmaster (not verified)

hey my bios doesnt have those options im running a laptop and i need to undervolt and overclock. can u shed some help? i may consider attempting e the fact flashing your bios over mine, despite the fact that ill most likely render my disfunctional. or do u have other suggestions etc etc?

September 24, 2012 | 04:55 PM - Posted by geniusthmaster (not verified)

just thought you would like to know, did some cusstomizations based upon my ELITE settings within my dell vostro core 2 duo westwood 1500 dell intel laptop, and i got this toshiba satellite 8100xlr8x to achieve stable all 4 cores at a 2464 Mhtz, the temparute gain without fan speed control is 1 c per second, the modification are thus:
volt rail 1 at 1.0063

volt rail 2 at 1.0437

turbo core disable

multiplier at 19x

system score on full benchmark :: 6436

March 12, 2014 | 03:14 AM - Posted by شارژ (not verified)

Just wish to say your article is as amazing.
The clearness in your post is just nice and i
can assume you are an expert on this subject.
Well with your permission let me to grab your RSS feed to keep up
to date with forthcoming post. Thanks a million and please
keep up the enjoyable work.

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.