Feedback

Video Perspective: Cooler Master Cosmos II Case Review

Author:
Manufacturer: Cooler Master

Cooler Master Aims to Impress

Right at the start of 2012, Cooler Master released a new case that was trumpeted as an "Ultra ATX" design.  And while the name itself is purely a Cooler Master creation, the Cosmos II chassis fits the name more than anything we have seen in recent memory.  Even though we posted this video on our PC Perspective YouTube channel before CES, I didn't get a chance to write up this short post and embed our host of images below.  

This is an impressive chassis design with tons of features and great layout decisions that needs to be seen to be understood - hence the video review below!

Cooler Master's new Cosmos II case is going to cost you $349 and while that price is extremely high, the fact is this is designed exactly for the PC builder that doesn't want to compromise on anything.  It weights nearly 50 pounds without a single component installed and feels like it could take more than its fair share of beating without showing damage.  Still, it is unique and stylish enough to look good at the same time. 

If you have the space and the money for the Cosmos II, then you will undoubtedly be happy with the purchase.

View Full Size

If you still want to see some photos of the Cosmos II, I have included an assortment of them below along with some descriptions and notes. 

View Full Size

Continue reading our review of the Cooler Master Cosmos II Case!!

You really can't see the massive size of this case from a single photo - instead, look above for the Cosmos II in reference to ME!  The brushed metal "feel" of the case is classy as well.

View Full Size

The front panel has a door that slides down to reveal the optical and hot-swap HDD bays.

View Full Size

The optical bays are modeled to look like the 3.5-in hot swap bays right below them.

View Full Size

Front panel connections on the Cosmos II includes 6 total USB ports, two of which are USB 3.0 ready, with an eSATA connection and audio input and output.

View Full Size

Above them rests the fan controller buttons (described in the video) as well as the power and reset buttons and indicator LEDs.  These can be hidden by the sliding door above them.

View Full Size

The signature feature is the swinging doors on both sides that allow you to easily access the internals while also serving as fan mounts and filters.

View Full Size

Cosmos II is divided into zones that allow for better cooling control.  The bottom of the cases includes a pair of fans in front of the bottom-mounted power supply.

View Full Size

Behind the pair of fans are six additional HDD bays that can actually be removed for installation of water cooling gear.

View Full Size

Here you can see the 6 six HDD trays removed with space made for a 240mm radiator!

View Full Size

Up top you can see optical bays, five more HDD bays and the rubber grommeted openings for cable routing.

View Full Size

Interestingly, the power supply actually extends OUTSIDE the back of the case and is held in place with another bracket.

View Full Size

The back of the Cosmos II gives you a bit of a scale for the sheer size of the case based on the power supply and expansion slots.

View Full Size

With support for 10 expansion slots the Cosmos II will work with quad-SLI and quad-CrossFire (as long as your motherboard does too) and the "+1" slot is there for audio break out cards or anything else (like a USB 3.0 header) that you don't want to take up a standard expansion slot.

View Full Size

The top of the case is removable and has room for three 120mm fans.

View Full Size

You can of course also fit in a triple-120mm radiator as well.

View Full Size

There are filters on all the air intakes including the front (seen here) the sides (on the doors) and on the bottom where the power supply rests (on the bottom).  

View Full Size

And, like many of the new cases in the last two years, the cable routing system on the Cosmos II is superb and allows for very easy and clean installations.

January 19, 2012 | 07:06 AM - Posted by Red1776 (not verified)

When you remove the bottom 2 x 3 HDD cages, it makes room for a 240mm radiator. not a 120mm rad as you have it.

January 19, 2012 | 10:32 AM - Posted by Ryan Shrout

Ah, thanks!

January 19, 2012 | 12:54 PM - Posted by red1776 (not verified)

anytime :)
I have spent two months with this case, putting my 6970 quadfire quad in it. And now am in the middle of WC'ing it. i think it is the finest production case I have had my hands on. (And i have had my hands on quite a few)

January 20, 2012 | 02:39 PM - Posted by Tony (not verified)

Looks good but have to say the caselabs M8 is still the dream case for me. Quality build and modular features win everytime.

January 20, 2012 | 07:39 PM - Posted by Anonymous (not verified)

That is to much case...

February 24, 2014 | 06:03 PM - Posted by PhoneyVirus

You mean EPS/EPS12V 8-Pin connector or also known as ATX12V/EPS/EPS12V connector.

EPS/EPS12V was created by Server System Infrastructure (SSI) in 1998 two years after ATX12V was created witch was in 1995 for the ATX12V 4-Pin connector.

https://ssiforum.org/

Just completed Power Supplies Chapter in Upgrading and Repairing PC's 21th Edition. Thanks for the Overview/Review I'll be ordering it indefinitely, sure it's like $400 with shipping but it'll be the last case of a every long time. Tired upgrading components and not having a enough room.

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.