Author:
Manufacturer: be quiet!

Introduction and Features

2-Banner.jpg

In this review we will take a detailed look at one of be quiet!’s top of the line power supplies, the Dark Power Pro 11 750W. There are currently six power supplies in the Dark Power Pro 11 Series, which include 550W, 650W, 750W, 850W, 1000W and 1200W models. As you might expect, be quiet! continues to be focused on delivering virtually silent power supplies and they are one of the top selling brands in Europe. All of the Dark Power Pro 11 models are certified for high efficiency (80 Plus Platinum) and come with modular cables.

be quiet! designed the Dark Power Pro 11 Series to provide high efficiency with minimal noise for systems that demand whisper-quiet operation without compromising on power quality. In addition to the Dark Power Pro 11 Series, be quiet! offers a full range of power supplies in ATX, SFX, and TFX form factors.

3-Compare.jpg

(Courtesy of be quiet!)

All of the Dark Power Pro 11 Series power supplies are semi-modular (all cables are modular except for the fixed 24-pin ATX cable). Along with 80 Plus Platinum certified high efficiency and quiet operation, the Dark Power Pro 11 750W PSU features an “overclocking” key to select between multi-rail and single rail +12V outputs. The power supply uses be quiet!’s latest SilentWings3 135mm fan for virtually silent operation. The fan speed starts out very slow and remains slow and quiet through mid-power levels. And the Dark Power Pro 11 power supplies allow connecting up to four case fans, whose speed will be controlled by the PSU.

4a-Side-view.jpg

be quiet! Dark Power Pro 11 750W PSU Key Features:

•    750W continuous DC output (ATX12V v2.4, EPS 2.92 compliant)
•    Virtually inaudible SilentWings3 135mm FDB cooling fan
•    80 PLUS Platinum certified efficiency (up to 94%)
•    Premium 105°C rated parts enhance stability and reliability
•    Powerful GPU support with seven PCI-E connectors
•    User-friendly cable management reduces clutter and improves airflow
•    NVIDIA SLI Ready and AMD CrossFire X certified
•    ErP 2014 ready and meets Energy Star 6.0 guidelines
•    Zero load design supports Intel’s Deep Power Down C6 & C7 modes
•    Overclocking key selects between single or multiple +12V rails
•    Active Power Factor correction (0.99) with Universal AC input
•    Intelligent speed control for up to four case fans
•    Safety Protections :OCP, OVP, UVP, SCP, OTP, and OPP
•    5-Year warranty

4b-PSU-cables.jpg

Here is what be quiet! has to say about the Dark Power Pro 11 750W PSU: "It is a fact of the modern world that high technology requires constant refinement and unending improvement – and that is even truer for those who would be leaders. Dark Power Pro power supplies are renowned as the world’s quietest and most efficient high-performance PSUs. The Dark Power Pro 11 750W model takes that a step further with a power conversion topology that delivers 80Plus Platinum performance, add to that an unparalleled array of enhancements that augment this unit’s compatibility, convenience of use, reliability, and safety, and the result is the most technologically-advanced power supply be quiet! has ever built.”

Please continue reading our review of the Dark Power Pro 11 750W PSU!

Author:
Manufacturer: SilverStone

Introduction and Features

Introduction

2-ST60F-TI-1.jpg

SilverStone is a veteran in the PC power supply industry and they continue to offer a full line of enclosures, power supplies, fans, coolers, and PC accessories. They have raised the bar in their Strider power supply series, which now includes three 80 Plus Titanium certified units, the ST60F-TI, ST70F-TI, and ST80F-TI. These three units are billed as being “the world’s smallest 80 Plus Titanium, full-modular ATX power supplies”; with a chassis that is only 150mm (5.9”) deep.

3-80Plus-Chart.gif

The 80 Plus Titanium efficiency standards were introduced in 2012 and are the most demanding specifications to date. In addition to raising the efficiency requirements at 20%, 50% and 100% loads, the Titanium standard adds a new requirement at 10%. This insures that a Titanium certified power supply will operate with at least 90% efficiency over the full range of loads and deliver up to 94% efficiency at a 50% load.

4-ST60F-TI-cables.jpg

I’m also happy to report that SilverStone is now providing a 5-year warranty on both the Strider Titanium and Strider Platinum series power supplies; up from their standard 3-year warranty.

SilverStone ST60F-TI Power Supply Key Features:

•    80 Plus Titanium certified for super-high efficiency
•    Compact design with a depth of 150mm for easy integration
•    All-modular, flat ribbon-style cables
•    100% all Japanese made capacitors
•    Strict ±3% voltage regulation and low AC ripple and noise
•    Powerful single +12V rail
•    Four PCI-E connectors for multiple GPU support
•    Safety Protections: OCP, OTP, OPP, UVP, OVP, and SCP
•    Quiet 120mm fan with Fluid Dynamic bearing
•    140mm dust filter
•    5-Year warranty

Please continue reading our review of the SilverStone ST60F-TI PSU!!!

Author:
Manufacturer: Corsair

Introduction and Features

Introduction

Corsair continues to expand their extensive power supply lineup with the addition of two new small form factor (SFX) units, the SF450 and SF600. The SF Series power supplies are fully modular and optimized for quiet operation and high efficiency. Both power supplies feature Zero RPM Fan Mode, which means the fan doesn’t start to spin until the power supply is under a moderate to heavy load. The SF450 and SF600 are 80 Plus Gold certified for high efficiency and come with a 5-year warranty.

2-SF600-top.jpg

While the SF Series is designed for use in small form factor enclosures, Corsair’s SF Series power supplies can also be used in standard ATX cases to save room via the optional SFX to ATX adapter bracket. As you can see in the photo below, the SF Series power supply is much smaller in all three dimensions than a standard ATX power supply. We will be taking a detailed look at the new SF600W power supply in this review.

3-SFX-ATX.jpg

SF Series 600W vs. ATX Series 650W

Corsair SF Series 600W PSU Key Features:

•    Small Form Factor (SFX) design
•    Very quiet with Zero RPM Fan Mode
•    92mm cooling fan optimized for low noise
•    80 Plus Gold certified for high efficiency
•    All-modular, flat ribbon-style cables
•    100% all Japanese made 105°C capacitors
•    ATX12V v2.4 and EPS 2.92 compliant
•    6th Generation Intel Core processor Ready
•    Safety Protections: OCP, OVP, UVP, SCP, OTP, and OPP
•    7-Year warranty

Please continue reading our review of the Corsair SF Series 600W PSU!!!

Introduction

Fractal Design has reduced their excellent Define S enclosure all the way down from ATX to mini-ITX, and the Define Nano S offers plenty of room for a small form-factor case.

Define_Nano_S_Cover.jpg

Large mini-ITX cases have become the trend in the past year or so, with the NZXT Manta the most recent (and possibly the most extreme) example. Fractal Design's Nano S isn't quite as large as the Manta, but it is cavernous inside thanks to a completely open internal layout. There are no optical drive bays, no partitions for PSU or storage, and really not much of anything inside the main compartment at all as Fractal Design has essentially miniaturized the Define S enclosure.

DSC_0304.jpg

We have the windowed version of the Define Nano S for review here, which adds some interest to a very understated design. There is still something very sophisticated about this sort of industrial design, and I must admit to liking it quite a bit myself. Details such as the side vents for front panel air intake do add some interest, and that big window helps add some style as well (and builders could always add some increasingly ubiquitous RGB lighting inside!).

Continue reading our review of the Fractal Design Define Nano S enclosure!!

Manufacturer: NZXT

Introduction and First Impressions

The NZXT Manta is a mini-ITX enclosure that boasts better than average room for components and cooling, and is packaged in a rather unusual, rounded design.

manta_one.jpg

There is a reason for the Manta's somewhat bulbous appearance, and it's part of a recent trend in mini-ITX enclosure design; bigger is better. While you might think that mITX is all about fitting components into the smallest enclosure possible, there have been some recent examples of cases which expand the chassis to micro-ATX sizes (or above).

The Manta from NZXT is actually large enough to be a micro-ATX case, and its total volume exceeds their S340 enclosure; a full ATX design (!). So why on earth would you want a mini-ITX enclosure with that much volume? Three words: cooling, cooling, and cooling.

manta_exploded_view.jpg

As you can see from NZXT's graphic above, the Manta's protruding top and front panels provide a the additional space needed to allow for thicker cooling setups.

DSC_0922.jpg

Before we dive in for a closer look at the new Manta enclosure, let's take a look at the full specs from NZXT:


Specifications:

  • Motherboard Support: mini-ITX
  • Expansion Slots: 2
  • Drive Bays
    • Internal 3.5”: 2 
    • Internal 2.5”: 3
  • Cooling System
    • Front: 2 x 140/120mm (2 x 120mm included) 
    • Top: 2 x 140/120mm 
    • Rear: 1 x 120mm (Included)
  • Radiator Support
    • Front: Up to 280mm 
    • Top: Up to 280mm 
    • Rear: 120mm
  • Clearance
    • CPU Clearance: 160mm
    • GPU Clearance: 363mm 
    • PSU Length: 363mm
  • Power Supply Support: ATX
  • External Electronics:
    • I/O Panel LED On/Off
    • 1x Audio/Mic
    • USB 3.0
  • Dimensions (WxHxD): 245 x 426 x 450mm (9.65 x 16.77 x 17.72 inches)
  • Weight: 7.2 kg (15.87 lbs)

Our thanks to NZXT for providing the Manta enclosure for our review.

First Impressions

DSC_0921.jpg

At first glance the Manta is a departure from the typical enclosure design. The rounded panels are built around a standard rectangular frame, so it's really quite conventional underneath.

DSC_0928.jpg

The look from the front of the enclosure really shows off the rounded sides, and this will certainly not be everyone's favorite look - but anything beyond the norm tends be divisive in this market.

Continue reading our review of the NZXT Manta Mini ITX Enclosure!!

Author:
Manufacturer: be quiet!

Introduction, Features and Specifications

Introduction

2-Banner.jpg

The German manufacturer be quiet! is best known for their attention to silence. They are currently introducing four new models in their entry-level Pure Power series, which includes the Pure Power 9 400W, 500W, 600W, and 700W power supplies. Be quiet! is targeting these power supplies to budget-minded users for use in silent PC builds, office applications, multimedia and home theater systems. The new Pure Power 9 series will replace the Pure Power L8 series.

3-PSU-side.jpg

All of the Pure Power 9 series power supplies are 80 Plus Silver certified for high efficiency (the L8 series is Bronze certified) and feature modular cables and a 120mm cooling fan. The power supplies are designed with dual +12V rails and incorporate a new active clamp and synchronous rectifier technology with zero voltage and zero current switching for increased efficiency. We will be taking a detailed look at the Pure Power 9 600W power supply in this review.

4-PSU-front.jpg

be quiet! Pure Power 9 600W PSU Key Features:

•    Exceptionally quiet operation (be quiet! silence-optimized 120mm fan)
•    80 Plus Silver certified with up to 91% power conversion efficiency
•    Two +12V rails and four PCI-E connectors for multi- GPU systems
•    Active Clamp + Synchronous Rectification circuit design
•    Modular cable management with flat ribbon-style peripheral cables
•    Meets latest Intel C6/C7, ErP and Energy Star guidelines
•    Active Power Factor correction (0.99) with Universal AC input
•    Product conception, design and QC in Germany, manufactured in China
•    3-Year warranty

Please continue reading our review of the be quiet! Pure Power 9 600W PSU!!!

Author:
Manufacturer: Phanteks

Introduction, Features and Specifications

Introduction

Phanteks currently sells cases, CPU coolers, cooling fans, and PC accessories. They recently added the Eclipse Series to their case lineup, which includes two models, the Eclipse P400 and the Eclipse P400S (silent edition). Both the P400 and P400S are available with black, white, or gray finishes and can be purchased with or without a side window. We will be taking a detailed look at the Phanteks Eclipse P400S ATX mid-tower, closed-panel case (no side window) in this review.

2-3xP400S.jpg

Phanteks Eclipse P400S Silent Edition ATX Mid-Tower Case
Satin Black, Glacier White, or Anthracite Gray
with, or without a side window

The Eclipse P400S silent edition case comes with an integrated 3-speed fan controller and two quiet 120mm fans (one intake and one exhaust). The P400S incorporates sound dampening panels on the front, top and both sides. And in addition to quiet cooling, the Eclipse P400 and P400S cases feature selectable, 10-color RGB LED lights at the bottom of the front panel for some interesting lighting effects. Two internal 2.5” SSD bays and two internal 3.5” HDD bays are included but there are no 5.25” external drive bays.

3-side-open.jpg

Phanteks Eclipse P400S ATX Mid-Tower Case Key Features:
•    Mid-Tower ATX enclosure (WxHxD, 210x465x470mm, 8.3x18.3x18.5”)
•    Supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards
•    Very quiet case for noise sensitive applications
•    Sound dampening panels on front, sides, and top
•    Easily removed dust filters on front, top and bottom panels
•    Two included case fans (120mm intake and 120mm exhaust)
•    Three-speed fan controller included
•    (2) USB 3.0, mic and headphone jacks on the top I/O panel
•    Two internal 3.5” HDD / 2.5” SSD trays
•    Two internal 2.5” SSD mounting brackets behind mobo tray
•    Tool-free mounting for 3.5” HDDs
•    Up to 395mm (15.2”) for long graphic cards
•    Up to 280mm (11.0”) clearance (with optional 3.5” HDD cages installed)
•    Up to 160mm (6.3”) of space for tall CPU coolers
•    Price: $79.99 USD

Please continue reading our Phanteks Eclipse P400S case review!!!

Manufacturer: VIVO

Introduction and First Impressions

Today we’re looking at an enclosure from VIVO, a new company on the scene who has created their new Titan mid-tower enclosure to enter the enthusiast case market. We’ll see how it stacks up in an already crowded market.

DSC_0915.jpg

A search on Amazon for enclosures will turn up the usual suspects, from Antec to Thermaltake (with BitFenix, Corsair, In Win, NZXT, Lian Li, Phanteks, SilverStone, and others in between). And right there in those search results is VIVO. Their Athena mid-tower is a nice-looking budget enclosure that sells for only $54.99, and with the Titan VIVO offering a more understated design, and some modern conveniences.

The Titan is spacious, with an open internal layout that places drive storage behind and below the motherboard tray, a common trend (Corsair’s Carbide 400C and the NZXT H440 have similar layouts). The cost of such a design (as with the aforementioned competitors) is a reduction in drive support, as only two 3.5-inch and a single 2.5-inch drive bay are included (with support for an addition pair of SSDs inside the case). This trend has its detractors, to be sure, but if your needs are limited to an SSD and a pair of hard drives, you’ll be just fine - and the Titan offers a pair of 5.25-inch bays, if desired.

DSC_0920.jpg

Continue reading our review of the VIVO Titan enclosure!!

Manufacturer: Thermaltake

Introduction and Technical Specifications

Introduction

In this follow-up discussion on Thermaltake's Core X9 E-ATX Cube Chassis, we look at advanced setup and configuration features, and just how much stuff you can cram into this massive case. For an in-depth overview of the case and a walk through of its features, please see our original review of the case here.

02-case-profile-filled_0.jpg

Courtesy of Thermaltake

The Thermaltake Core X9 E-ATX Cube Chassis is one of the largest and most configurable they've developed. The case is roughly cube shaped with a steel and plastic construction. The height and depth of the unit allows the Core X9 to support up to quad-fan radiators mounted to its top or sides and up to a tri-fan radiator in front. At an MSRP of $169.99, the Core X9 E-ATX Cube Chassis features a competitive price in light of its size and configurability.

03-radiator-support.jpg

Courtesy of Thermaltake

04-fan-support.jpg

Courtesy of Thermaltake

The Core X9 case was designed to be fully modular, supporting a variety of build configurations to be able to adapt to the whatever build style the end user can dream up. The case comes with a variety of mounts for mounting fans or liquid cooling radiators to the top, side, or bottom of the case. Until you can accurately visually just how many radiators and fans that this case supports, you really don't have a feel for the immense size of the Core X9. From front to back, the case support 4 x 120mm fans or a 480mm radiator along either of its lower sides or in the dual top mounts. On top, you can actually mount a total of eight 120mm fans or dual 480mm radiators if you so choose. And that doesn't take into account the additional two 140mm fans that can be mounted in the upper and lower sections of the case's rear panel, nor the three 120mm fans, dual 200mm fans, or 360mm radiator that can be mounted to the case's front panel.

Continue reading our review of the Thermaltake Core X9 Cube chassis!

Author:
Manufacturer: EVGA

Introduction and Features

Introduction

2-PCPer-BannerGQ.jpg

Earlier this year we reviewed the EVGA 750W GQ power supply and found it to be a worthy addition to EVGA’s already plentiful power supply lineup. Today we are taking a detailed look at another member of the GQ series, the 650W GQ. It’s always nice to be able to compare different models of the same series for consistency. The GQ series is aimed at price conscious consumers who want good value while still maintaining many of the performance features found in EVGA’s premium models. The GQ Series contains four models ranging from 650W up to 1000W: the EVGA 650 GQ, 750 GQ, 850 GQ and 1000 GQ.

3-GQ-Banner.jpg

All of the GQ series power supplies are 80 Plus Gold certified for high efficiency and feature modular cables, high-quality Japanese brand capacitors, and a quiet 135mm cooling fan with a fluid dynamic bearing. The GQ series power supplies are NVIDIA SLI and AMD Crossfire Ready and are backed by a 5-year warranty.

4a-PSU-650.jpg

EVGA 650W GQ PSU Key Features:

•    Fully modular cables to reduce clutter and improve airflow
•    80 PLUS Gold certified, with up to 90%/92% efficiency (115VAC/240VAC)
•    100% Japanese brand capacitors ensure long-term reliability
•    Quiet 135mm Fluid Dynamic bearing fan for reliability and quiet operation
•    ECO Intelligent Thermal Control allows silent, fan-less operation at low power
•    NVIDIA SLI & AMD Crossfire Ready
•    Ready for 4th Generation Intel Core Processors (C6/C7 Idle Mode)
•    Compliant with ErP Lot 6 2013 Requirement
•    Active Power Factor correction (0.99) with Universal AC input
•    5-Year warranty and EVGA Customer Support

EVGA was founded in 1999 with headquarters in Brea, California. They continue to specialize in producing NVIDIA based graphics adapters and Intel based motherboards and keep expanding their PC power supply product line, which currently includes thirty-eight models ranging from the high-end 1,600W SuperNOVA T2 to the budget minded EVGA 400W power supply.

4b-650W-Compare.jpg

(Courtesy of EVGA)

As you can see in the table above, EVGA currently offers six different variations of 650W power supplies. Let’s get started with the review and see how the 650 GQ compares to the 750 GQ.

Please continue reading our review of the EVGA 650W GQ PSU!!!

Manufacturer: Reeven

Introduction and Technical Specifications

Introduction

02-4eyes-1.jpg

Courtesy of Reeven

The Reeven Four-Eyes Touch Fan Controller is a new revision of their existing four-channel controller, integrating a touch-based interface into the design. The Four-Eyes controller is housed in a metal enclosure that fits into a single 5.25" drive bay. With an MSRP of $49, the Four-Eyes Touch Fan Controller makes a good match for any enthusiast build.

03-4eyes-2.jpg

Courtesy of Reeven

The Four-Eyes Touch has a front screen divided into seven distinct sections, all touch capable. The upper four sections are tied to individual fan channels each supporting up to a 2.5A fan with total power provided of up to 30 watts. The lower right section controls the unit warning sound and display temperature with the lower left used to set the display to one of seven colors. The lower middle section is used to set the fan speed, you simply swipe your finger across the section to increase or decrease the active channel's fan speed.

Technical Specifications (taken from the Thermaltake website)

Model Number RFC-03
Dimensions (W)148 x (H)42 x (D)100mm
DC Input DC5V & DC12V
DC Output 3.7V ~ 12V (±10%)
Output Ampere 2.5A per Channel
Temperature Range 0 ~ 99C
Fan Speed Range 0 ~ 9990rpm
Weight 200g

Continue reading our review of the Reeven Four-Eyes Touch Fan Controller!

Manufacturer: CRYORIG

Introduction and First Impressions

The CRYORIG C7 is a compact air cooler for Intel and processors, designed to fit anywhere a stock solution will. Standing just 47 mm tall, and featuring a footprint close in size to an Intel stock cooler, CRYORIG claims this ultra-compact design will still outperform the stock solution.

c7_01.jpg

An attractive design, the C7 is further sweetened by a $29.99 retail, which places it in a favorable position in the compact CPU cooler market. Designs like these are rarely useful for enthusiasts, but there it certainly a need for good aftermarket options when overclocking isn't a consideration. There was a time when the stock Intel cooler was sufficient for many basic builds, and for some that may still be the case. But if you've spent a little more to get higher performance, a better heatsink can certainly help; and if you're an enthusiast, the stock cooler was never adequate anyway (even before Intel stopped shipping it in K series CPUs).

c7_02.jpg

In this review we'll find out if this small cooler can deliver on its performance promise, and see just how much noise it might make in the process.

Continue reading our review of the CRYORIG C7 Ultra-Compact CPU Cooler!!

Author:
Manufacturer: Thermaltake

Introduction and Features

Introduction

2-Banner-1.jpg

There has been growing interest in recent years in quiet computing with more users looking for components that will help them build a quiet PC. Thermaltake’s new Suppressor F31 Silent ATX mid-tower chassis is aimed squarely at this audience. Thermaltake has been around since 1999 and is a well-respected name in the PC industry. They offer a full line of cases, power supplies, cooling components, and accessories.

The Suppressor F31 chassis is available with or without a side window and comes in black. Thermaltake also offers several other variations in the Suppressor line, which include the Suppressor F31 Power Cover Edition (large baffle located over the PSU area) and the Suppressor F51 Mid-Tower case (slightly larger chassis capable of mounting an Extended-ATX form factor motherboard). We will be taking a detailed look at the Suppressor F31 Window ATX Mid-Tower Chassis in this review.

The Thermaltake Suppressor F31 is wider than most mid-tower enclosures (250mm/9.8”) and incorporates sound dampening panels on the front, top and both sides. Note: the Window version replaces the left side panel sound dampening material with a large acrylic window. The top panel has three separate sound dampening panels that can easily be removed to make room for additional case fans or a top mounted liquid cooling radiator. The Suppressor F31 comes with two quiet case fans installed: one 120mm intake on the front and one 120mm exhaust on the back.

3-Inside.jpg

The roomy chassis offers numerous options for adding more case fans (up to nine total) for increased airflow as well as several options for installing liquid cooling systems of various sizes (single, dual, and/or triple fan/radiators). All of the potential fan locations are designed to mount either 120mm or 140mm fans. The front panel can mount one 200mm fan and the top panel can mount two 200mm fans if desired.

4-F31-built.jpg

(Courtesy of Thermaltake)

Suppressor F31 Window ATX Mid-Tower Case Key Features:
•    Mid-Tower ATX enclosure (HxWxD, 497x250x515mm, 19.5x9.8x20.3”)
•    Large clear acrylic side window (also available without a side window)
•    Supports ATX, Micro-ATX and Mini-ITX motherboards (F51 supports E-ATX)
•    Extremely quiet case for noise sensitive applications
•    Sound dampening panels on front, side, and top
•    Easily removed dust filters on front, top and bottom panels
•    Two included Thermaltake fans (120mm intake and 120mm exhaust)
•    Numerous cooling options for adding fans and/or liquid cooling
•    (2) USB 3.0, (2) USB 2.0 and HD audio jacks on the top I/O panel
•    Three internal 3.5” hard drive / 2.5” SSD trays
•    Three optional 3.5”/2.5” drive mounting locations behind mobo tray
•    Two external 5.25” drive bays
•    Tool-free mounting for all 3.5” internal and 5.25” external drives
•    Up to 278mm (10.9”) clearance for graphic cards
•    Up to 420mm (16.5”) for long graphic cards (with HDD cage removed)
•    Up to 180mm (7.1”) of space for tall CPU coolers
•    Price: $99.99 USD

Please continue reading our Suppressor F31 case review!!!

Manufacturer: Corsair
Tagged:

Introduction and First Impressions

The Corsair Carbide 400C is a mid-tower enclosure that offers a very large window to show off your build through a side panel that’s also a hinged, and latching, door.

DSC_0659.jpg

With the Carbide 600 series Corsair introduced a new full-tower enclosure with an understated style, and some very nice features. The matching 400 series offer a slightly smaller version of these enclosures, with a few changes. These new Carbide 600 and 400 series cases offer both noise-reducing quiet versions (600Q, 400Q), as well as clear side-panel versions (600C, 400C). We recently looked at the full-tower Carbide 600Q, which performed well from a thermal standpoint, and, to a greater extent, with noise output.

The case we’ll be taking a look at today is the mid-tower cousin of the Carbide 600C, and this 400C drops the larger enclosure’s inverse ATX design in favor of a standard layout, but retains most other aspects of the design. Corsair’s 400 series duplicates many aspects of the larger, and more expensive, 600 series full-tower enclosures, and are priced $50 less. From the outside the 400C looks like a slightly smaller version, but once inside there are some notable differences.

DSC_0662.jpg

The Carbide 400C does not offer the noise dampening of the 400Q, dropping in favor of a large window and hinged, latching door. This tradeoff has allowed Corsair to market both version at the same price point, leaving it up to the consumer to decide where their priorities are. As mentioned, the 400 series are not simply smaller version of the 600C/600Q, as the internals are quite different. For instance, the PSU mount (and plastic shroud covering it) moves down to the case floor with to o400 series, and there are no 5.25-inch bays this time.

Beyond the changed layout, this clear version will likely differ from the results we saw with the 600Q. Thermal performance might be affected by the ATX layout, but the lack of insulation could mitigate this. Another factor is the noise output from a “C” version, which would presumably be significantly louder than the very quiet 600Q previously tested. We’ll cover all of that - along with build quality and ease of installation - in this review.

Continue reading our review of the Corsair Carbide 400C case!!

Manufacturer: Reeven

Introduction and Technical Specifications

Introduction

02-okeanos-profile.jpg

Courtesy of Reeven

03-brontes-profile.jpg

Courtesy of Reeven

Reeven is a new comer to the computer cooling space, offering a wide range of coolers and fans for all aspects of the industry. The latest members of their cooler lineup, the Okeanos and Brontes coolers, offer high performance in two very different form factors. The Okeanos is a large dual radiator, dual fan cooler while the Brontes is a low profile C-shaped cooler touting compatibility across most form factors. While the Okeanos offers support for all known CPU and board types, the Brontes supports all mainstream systems with the exception of the Intel 2011-based CPUs and boards.

Continue reading our review of the Reeven CPU coolers!

Introduction and Technical Specifications

Introduction

***Editor's Note*** - Before getting into the nuts and bolts of the Core X9, please understand that this initial review is meant as a detailed introduction into the capabilities and build strengths of the Core X9 E-ATX Cube Chassis. A deeper look into the advanced capabilities of this monstrous case will be explored in a soon to be released follow-up article. Stay tuned to PC Perspective for the follow-up.

02-case-profile-filled.jpg

Courtesy of Thermaltake

The Thermaltake Core X9 E-ATX Cube Chassis is one of the largest and most configurable they've developed. The case is roughly cube shaped with a steel and plastic construction. The height and depth of the unit allows the Core X9 to support up to quad-fan radiators mounted to its top or sides and up to a tri-fan radiator in front. At an MSRP of $169.99, the Core X9 E-ATX Cube Chassis features a competitive price in light of its size and configurability.

03-parts.jpg

Courtesy of Thermaltake

04-air-cooled-flyapart.jpg

Courtesy of Thermaltake

The Core X9 case was designed to be fully modular, supporting a variety of build configurations to be able to adapt to the whatever build style the end user can dream up. The case comes with a variety of mounts for mounting fans or liquid cooling radiators to the top, side, or bottom of the case. Additionally, Thermaltake integrated three 5.25" device bays as well as two hard drive bays supporting up to three drives each. The chassis motherboard is removable as well for easy install of the motherboard into the system. The chassis itself can be easily segregated into upper and lower sections for controlling system and component heat flow if desired.

05-radiator-support.jpg

Courtesy of Thermaltake

06-fan-support.jpg

Courtesy of Thermaltake

Until you can acurately visually just how many radiators and fans that this case supports, you really don't have a feel for the immense size of the Core X9. From front to back, the case support 4 x 120mm fans or a 480mm radiator along either of its lower sides or in the dual top mounts. On top, you can actually mount a total of eight 120mm fans or dual 480mm radiators if you so choose. And that doesn't take into account the additional two 140mm fans that can be mounted in the upper and lower sections of the case's rear panel, nor the three 120mm fans, dual 200mm fans, or 360mm radiator that can be mounted to the case's front panel.

Continue reading our review of the Thermaltake Core X9 Cube chassis!

Manufacturer: Phanteks

Introduction and First Impressions

The Enthoo EVOLV ITX it is not a new enclosure, but this striking color scheme - black with a glossy red interior - is. We'll take a thorough look at this mini-ITX enclosure in this review, and see how well it performs enclosing a gaming build.

DSC_0355.jpg

The EVOLV series from Phanteks includes ATX, micro-ATX, and this mini-ITX versions; with all three sharing a common design language, though some of the features naturally differ. With this smallest design Phanteks decided to retain enough size to permit the use of standard components, with room for ATX power supplies, full length graphics cards, and liquid CPU cooling with up to a 280 mm radiator.

The EVOLV ATX was my first experience with a Phanteks enclosure, and I was impressed with the build quality and thoughtful design touches. There is a different approach to building with mini-ITX that introduces new elements, including the ability of a system to remain cool and quiet with components in much tighter quarters.

DSC_0400.jpg

Continue reading our review of the Phanteks Enthoo EVOLV ITX case!!

Author:
Manufacturer: EVGA

Introduction and Features

Introduction

2-750-GQ-Banner.jpg

(Courtesy of EVGA)

EVGA continues to expand their already huge PC power supply line with the introduction of the GQ series, which are aimed at price conscious consumers who want good value while still maintaining many of the performance features found in EVGA’s premium models. The GQ Series contains four models ranging from 650W up to 1000W: the EVGA 650 GQ, 750 GQ, 850 GQ and 1000 GQ. We will be taking a detailed look at the 750 GQ in this review.

3-GQ-Banner.jpg

The GQ series power supplies are 80 Plus Gold certified for high efficiency and feature all modular cables, high-quality Japanese brand capacitors, and a quiet 135mm cooling fan with a fluid dynamic bearing. All GQ series power supplies are NVIDIA SLI and AMD Crossfire Ready and are backed by a 5-year warranty.

4a-750GQ.jpg

EVGA 750W GQ PSU Key Features:

•    Fully modular cables to reduce clutter and improve airflow
•    80 PLUS Gold certified, with up to 90%/92% efficiency (115VAC/240VAC)
•    100% Japanese brand capacitors ensure long-term reliability
•    Quiet 135mm Fluid Dynamic bearing fan for reliability and quiet operation
•    ECO Intelligent Thermal Control allows silent, fan-less operation at low power
•    NVIDIA SLI & AMD Crossfire Ready
•    Ready for 4th Generation Intel Core Processors (C6/C7 Idle Mode)
•    Compliant with ErP Lot 6 2013 Requirement
•    Active Power Factor correction (0.99) with Universal AC input
•    5-Year warranty and EVGA Customer Support

EVGA was founded in 1999 with headquarters in Brea, California. They continue to specialize in producing NVIDIA based graphics adapters and Intel based motherboards and keep expanding their PC power supply product line, which currently includes thirty-eight models ranging from the high-end 1,600W SuperNOVA T2 to the budget minded EVGA 400W power supply.

4b-750W-Compare.jpg

(Courtesy of EVGA)

As you can see in the table above, EVGA currently offers seven different variations of 750W power supplies. Let’s get started with the review and see what makes this new 750W GQ model stand out from the rest.

Please continue reading our review of the EVGA 750W GQ PSU!!!

Manufacturer: Corsair

Introduction and First Impressions

The new Corsair Carbide 600Q and 600C enclosures are the company's first inverted ATX designs, and the layout promises improved airflow for better cooling.

DSC_0228.jpg

The Carbide Series from Corsair has encompassed enclosures from the company's least expensive budget-friendly options such as the $59 Carbide 100R, to high-performance options like the $159 Carbide Air 540. This new Carbide 600 enclosure is available in two versions, the 600C and 600Q, which both carry an MSRP of $149. This positions the 600C/600Q enclosures near the Graphite and Obsidian series models, but this is only fitting as there is nothing "budget" about these new Carbide 600 models.

The Carbide Series 600Q in for review differs from the 600C most obviously in its lack of the latter's hinged, latching side-panel, which also contains a large window. But the differences extend to the internal makeup of the enclosure, as the 600Q includes significant noise damping inside the front, top, and side panels. We'll be taking a close look at the noise levels along with thermal performance with this "Q" version of the new enclosure in our review.

Carbide_600Q_AIRFLOW.jpg

Continue reading our review of the Corsair Carbide Series 600Q enclosure!!

Manufacturer: Scythe

Introduction and First Impressions

The Scythe Ninja 4 (SCNJ-4000) is the latest model in the Ninja series, and an imposing air cooler with dimensions similar to Noctua's massive NH-D14. But there's more to the story than size, as this is engineered for silence above all else. Read on to see just how quiet it is, and of course how well it's able to cope with CPU loads.

NINJA4-Side_View.jpg

"The Ninja 4 is the latest model in the Ninja CPU Cooler Series, developed for uncompromising performance. It features the new T-M.A.P.S technology, an optimized alignment of heatpipes, and the back-plate based Hyper Precision Mounting System (H.P.M.S) for firm mounting and easy installation procedure. These improvements and a special, adjustable Glide Stream 120mm PWM fan result in an increased cooling performance while reducing the weight compared to his predecessor. Also the design of the heat-sink allows fan mounting on all four sides. This enables the optimal integration of the Ninja 4 in the air flow of the pc-case and reduces turbulence and the emergence of hotspots."

The Ninja 4 is built around a very large, square heatsink, which allows the single 120 mm fan to be mounted on any side, and this PWM fan offers three speed settings to further control noise. And noise is really what the Ninja is all about, with some really low minimum speeds possible on what is a very quiet Scythe fan to begin with.

NINJA4-Frontview.jpg

Will a single low-speed fan design affect the ability to keep a CPU cool under stress? Will the Ninja 4's fan spin up and become less quiet under full load? These questions will soon be answered.

Continue reading our review of the Scythe Ninja 4 CPU cooler!!