KDComp CPC-30370 Heatsink Review
The Package and Installation
This content was originally featured on Amdmb.com and has been converted to PC Perspective's website. Some color changes and flaws may appear.The CPC-30370 arrived complete with a 60 mm Delta 37 cfm fan and is the choice of the writer. If the noise generated by the Delta is too
much for you, KD Computers offers the CPC-30370
with your choice of fans or as a stand alone heatsink
with all mounting hardware for those of you who may
already have a suitable fan.
Click to Enlarge
As you can see from the picture, this has to be one of the
easiest HSF’s to install. First, put a very thin layer of your
favorite thermal compound (ours is Artic Silver II) on the
core of the CPU. Place the CPC-30370 on the CPU with
the step in the HSF to the top of the socket. Attach the two
spring loaded retention clips to the center flanges of the Zif
socket. Now back off the screws on the top of the retention clips about 1/8 of an inch or until the head of the screw is about that distance from the top of the clips. Plug the lead
from the fan to the motherboards three-pin header (only if
your motherboards fan header can handle the voltage) or to
a four-pin Molex connector.
Click to Enlarge
The CPC-30370 should fit on any Socket A motherboard
(the motherboard pictured above is an IWill KA266). The
size of this HSF is such that it is in perfect alignment with
the Zif socket and lever as you can see from the overhead
view. The weight of this unit is not a question as it comes
in complete at 343 grams and that is light as high performance heatsinks go, just compare the Hedgehog at 475 grams and the CORE at 500 grams just to mention a few that I’ve actually weighed.
Get notified when we go live!