EVGA SuperNOVA NEX1500 Classified 1500W Power Supply Review
Load Regulation, Line Regulation and Cross-Loading
DC Output Load Regulation
Of course one of the first things we want to see is how well this PSU can regulate the DC outputs and maintain stable voltages. To simulate real world and maximum loading conditions, the SuperNOVA NEX1500 PSU was connected to the load testers and supplied with a constant 115 VAC. In this test we are interested in seeing how well a PSU can maintain the various output voltages while operating under different loads.
The ATX12V V2.2 tolerance for voltages states how much each output (rail) is allowed to fluctuate and has tighter tolerances now for the +12V outputs. I have also included a second table of expanded tolerances (±1% to ±6%) for reference.
The following tables list the DC voltage results at the different loads for the EVGA SuperNOVA NEX1500 PSU while operating on 115 VAC, 60 Hz.
*Overclocked (240VAC input)
The SuperNOVA NEX1500 PSU produced very good load regulation on the primary outputs all the way up to 1650W. At 1500W or less, the main outputs were ±2% of the nominal voltage instead of the recommended ±5%; pretty impressive!
DC Output Line Regulation
In this test we are interested in seeing how well a PSU can maintain the various output voltages while the AC input line voltage changes. In the previous Load Regulation test, the AC line voltage was held constant at 115 VAC. Now we will look at how much the DC outputs change as the load is held constant and the AC line voltage is changed from 120 VAC down to 90 VAC.
The Line Regulation test was performed with the combined DC loads set to 1125W. The AC input voltage to the power supply (via the Extech power analyzer) was adjusted using a Powerstat variable autotransformer with virtually no measurable change in the DC outputs; again, very good.
Cross-loading refers to imbalanced loads. If a PC pulls 800W on the +12V outputs and only 20W (or less) on the combined 3.3V and +5V outputs, the resulting voltage regulation may suffer.
In the first test we put a heavy load on the +12V output and a light load on the remaining outputs. The NEX1500 PSU had no problem delivering 90A on the +12V rail under these conditions. Even with this large imbalance, the voltages all stayed well within spec. This is pretty much what we have come to expect from newer PSUs that use DC-to-DC converters to produce the +3.3V and +5V outputs from the +12V rail, which makes them relatively immune to cross-loading problems.
In the second test we reversed the cross-load and placed a heavy load on the +3.3V and +5V outputs with a light load on the +12V rail. Once again, the PSU passed this test without problems and all the voltages remained in spec.
Get notified when we go live!