Review Index:

Corsair Hydro Series H90 and H110 140mm-Based Liquid Cooler Review

Manufacturer: Corsair

CPU Module and Radiator Discussion

CPU Module

View Full Size

The CPU module on both the H90 and H110 coolers is comprised of a thick extruded plastic watertight compartment bolted to the copper CPU cold plate. The plastic top of the unit has a simple white colored Corsair logo embedded on it, but does not contain the embedded LEDs or Corsair Link&trade ports of the H100i or H80i cpu modules. One other difference is the lack of drain/fill ports in the H90 and H110 cpu modules.

View Full Size

The bottom portion of the CPU module is a copper cold plate with manufacturer applied thermal paste for your initial CPU mount. To protect the thermal paste and the finish of the cold plate itself, Corsair ships the cpu module with a snug-fitting clear plastic cap. Notice the double line of screws along the outside of the bottom of the cooler. The inner ring secures the cold plate to the pump assembly chamber, while the outer ring holds the top cap securely to the pump and water chambers.

View Full Size

With the thermal paste cleaned from the surface of the cold plate, we can see the construction and finish quality of the cold plate and its surface. The surface is flat and imperfection free with the slight rings in the surface a result of the surface finishing and polishing process. The input and output valves are 90 degree angled 1/4 inch barbs with full 360 degree rotation possible. The unit's pump is powered from a 3-pin fan connector.

Radiator Discussion

View Full Size

The included 140mm-based radiators included with both the H110 and H90 units are just barely thicker than the included 25mm fan, as shown in the picture. In the previous Corsair Hydro review, we found that the 120mm-based radiators of the same thickness (specifically with the H100i unit) held the unit back, while the H80i with a double thickness radiator received the gold award because of its increase performance capabilities. We shall see how the 140mm radiators fare.

View Full Size

View Full Size

The radiator features 1/4 inch input and outlet barbs as shown in the unit pictures. In a water cooling system, the radiator is typically the most restrictive part of the system necessitating the use of larger input and outlet barbs to compensate for this fact. Use of the 1/4 inch barbs goes against this common practice and could further hamper the H100 and H90's performance.

February 27, 2013 | 02:09 AM - Posted by razor512

Great review, will try to save up for one for my AMD CPU that keeps hitting 70c at load using the sunbeam core contact cooler

February 27, 2013 | 03:28 AM - Posted by John Doe (not verified)

Mind you that the CCF is a direct touch heatpipe cooler, so you might want to check out if it's making contact well, and re-TIM if necessary.

I had one back in the day and even thought a cheap cooler, it wasn't that bad. It did the job and kept my E6600 cool. It's not all that well built though you might want to remount it or slap a second fan to it somehow. A second fan would help that cooler.

And well, I wouldn't suggest these cheap AIO water loops. Just get a TPC-812 and be done with it.

September 7, 2013 | 07:18 PM - Posted by stas (not verified)

tell me please guys, does corsair h110 fits inside thermaltake armor revo case?

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.