Corsair Hydro Series Cooler Comparison and Review - H60, H80i, H100i
H80i High Performance Liquid CPU Cooler Overview
Courtesy of Corsair
- Self-contained Cooling System
- Built-In Corsair Link
- Tool-free multiplatform magnetic mounting bracket kit
- Large-diameter, low permeability tubing
H80i Cooler Layout
The Hydro Series™ H80i cooling system consists of an aluminum-based 120mm x 120mm x 38mm radiator capable of supporting two 120mm x 120mm fans, attached to a CPU copper-based cooling assembly via 3/8 inch rubber hoses. The CPU cooler contains embedded magnets to better hold the CPU clip to the body of the cooling assembly. The cooling hoses are attached to the CPU assembly by rotating nozzles, capable of almost a full 360 degrees of rotation.
The H80i comes standard with two 120mm x 120mm x 25mm fans that are mounted to the unit in a push-pull configuration for maximum cooling airflow.
The H80i's CPU contact area is a pure copper-based cold plate, with the pump, Corsair Link™, and LED electronics and ports sitting atop the cold plate itself. Additionally, the block has a coolant drainage port included. The pump, LED, and fans are powered via the attached SATA power cable with pump speed monitoring provided by the 3-pin fan cable.
Technical Specifications (taken from the Corsair website)
|120mm x 152mm x 38mm|
|120mm x 120mm x 25mm|
Fan static pressure