All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Processors | October 23, 2012 - 02:44 PM | Jeremy Hellstrom
Tagged: vishera, Steamroller, piledriver, FX-8350, fx-8150, FX-6300, FX-6200, bulldozer, amd
The FX-8350 Vishera processor from AMD has finally arrived with 8 fully unlocked cores of polished Piledriver processing power. With Piledriver there are no huge changes to the existing Bulldozer architecture, this is more of a polishing and optimizing the existing architecture and [H]ard|OCP's testing bears that out. While faster than the previous generation FX-8150 it still lags behind Intel's Ivy Bridge processors, disappointing but certainly expected. The unlocked cores do lend themselves somewhat to overclocking, with [H] hitting a stable 4.6GHz with all cores enabled, a 10% jump in frequency. At that speed it does better when competing with Intel's offerings, until you overclock them as well at which point the comparative performance suffers somewhat.
Make sure to catch Josh's review, covering both the 8 core FX-8350 and the $132 FX-6300 which has a disabled module; bringing back memories of older AMD chips whose modules could be brought back to life.
"AMD's new Piledriver core technology should not be a surprise to any enthusiast as much of its "embargoed" information has already been exposed on the Net. Today we take the AMD FX series model 8350 desktop variant, code named Vishera, and look at it in an enthusiast way as we expose its IPC at 4GHz, and a bit of overclocking."
Here are some more Processor articles from around the web:
- AMD's FX-8350 processor @ The Tech Report
- AMD FX-8350 "Vishera" Linux Benchmarks @ Phoronix
- AMD FX-8350 8-Core Black Edition Processor Review @ Legit Reviews
- AMD Vishera FX-8350 Review @ OCC
- The Vishera Review: AMD FX-8350, FX-8320, FX-6300 and FX-4300 Tested @ AnandTech
- AMD FX-8350: Piledriver @ Bjorn3D
- AMD FX-8350 @ Overclockers.com
- AMD FX-8350 vs Intel Core i7-3770K @ 4.8GHz - Multi-GPU Gaming Performance @ VR-Zone
- FX-8350 vs. Core i5-3470 CPU Review @ Hardware Secrets
- AMD FX-8350 (AM3+) Piledriver Processor Review @ eTeknix
- AMD FX-8350 Unlocked "Vishera" Octal Core CPU Review @ Hi Tech Legion
- AMD FX-8350 Vishera Desktop Processor @ Benchmark Reviews
- AMD FX-8350 and FX-6300 @ Legion Hardware
- AMD Piledriver FX Review - FX 8350, 8320, 6300 vs Intel Core i5 and i3 @ hardCOREware
- AMD FX-8350 Processor Review @ HardwareHeaven
- AMD FX-8350 and FX-6300 Piledriver @ TechSpot
- FX-8350 CPU Review; AMD's Vishera Arrives @ Hardware Canucks
- AMD FX8350 BE / Gigabyte HD7970 / ASUS Sabretooth 990FX R2 @ Kitguru
- AMD FX 8350 @ Guru of 3D
- AMD FX-8350 - "Piledriver" for AMD Socket AM3+ @ techPowerUp
Subject: Processors | October 18, 2012 - 05:58 PM | Jeremy Hellstrom
Tagged: homdo, AMD z-series, z-60 apu, tablet, win8
Could AMD powered tablets firt in a sweet spot for those looking to pick up one of these new Win8 powered devices? They will certainly be more powerful than an ARM powered WinRT tablet and the graphics will be superior to Intel powered tablets. The Z-60 will have two 1GHz Bobcat cores each with 512KB of L2 cache and the HD 6250 GPU with 80 DirectX 11-class shader ALUs which should give snappy performance up to a 1920x1200 resolution. The Tech Report talks about the various benefits and penalties to choosing a Hondo based device over an Ivy Bridge powered on in their article here.
"AMD is readying a new APU aimed at Window 8 tablets and hybrids. Otherwise known as Hondo, this Z-60 processor offers lower power consumption than AMD's existing APUs, and it comes with a side order of USB 3.0."
Here are some more Processor articles from around the web:
- AMD A8-5600K Trinity Desktop APU Review @ Legit Review
- AMD Piledriver/Trinity A10-5800K Compiler Tuning @ Phoronix
- AMD Trinity Review - A10 5800K vs Core i3 3220 @ HCW
- AMD A10-5800K Performance On Ubuntu Linux @ Phoronix
- AMD Trinity A10-5800K APU Review @ Hardware Canucks
- AMD Launches Z-60 APU (Hondo) for Windows 8 @ Bjorn3D
- A10-5800K vs. Core i3-3220 CPU Review @ Hardware Secrets
- AMD's A10-5800K and A8-5600K 'Trinity' APUs @ The Tech Report
- AMD A8 5600K APU @ Guru3D
- AMD A8-5600K APU Trinity Desktop Processor @ Benchmark Reviews
- AMD A8-5600k APU Processor Review @ eTeknix
- AMD A10-5800K Trinity Desktop Processor @ Benchmark Reviews
- AMD A10-5800K Trinity APU @ Techspot
- AMD 2nd Generation A10 5800 & A8 5600 Desktop APU Review @ OCC
- AMD A10-5800K "Trinity" APU On Linux @ Phoronix
- All Core i5 Models @ Hardware Secrets
- All Core i7 Models @ Hardware Secrets
Subject: Processors | October 17, 2012 - 06:48 AM | Tim Verry
Tagged: xeon E5-2600 v2, lga 2011, Ivy Bridge-EP, Intel, 22nm
A recently leaked slide reveals one of Intel’s upcoming Xeon-branded server chips coming in Q3 2013. The Xeon E5-2600 V2 is an Ivy Bridge-EP processor and will be compatible with motherboards featuring the LGA 2011 socket.
The Xeon E5-2600 V2 in particular has a 70W TDP (thermal design power) rating while the highest-end Ivy Bridge-EP CPUs will have TDPs of up to 130W. The E5-2600 V2 has 10 physical cores, and with HyperThreading it can handle a maximum of 20 threads. Each physical core has access to 256KB L2 cache and the chip has a total of 30MB L3 cache. Further, this (and other) Ivy Bridge-EP processor will support up to 1866MHz DDR3 system RAM.
Interestingly, the Xeon E5-2600 V2 is merely the middle of the road part for Intel. The company will be releasing processors that are even higher-end than this one. They will have up to 12 physical cores which means up to 24 threads. And paired with Intel's 22nm manufacturing process and 3D transistors, these chips will fit right into workstations and server rooms.
Subject: General Tech, Motherboards, Processors | October 2, 2012 - 08:06 PM | Scott Michaud
Tagged: overclock, asus
ASUSTeK has just accomplished a new world record overclock with their ASUS Maximus V Extreme motherboard. They calculated 1 million digits of Pi in a time of 5s 94ms which beats the current best time 5s 125ms according to HWBot. This result once validated lands the Maximus V Extreme in the 1st, 2nd, 3rd, and 4th place positions.
ASUS has once again broke records in the Pi eating contest with their Maximus V Extreme motherboard.
It must be a fun day for an overclocker when you get to play with Liquid Helium. While I attended the Physics department of Queen’s University up here in Canada the facility was known for its condensed matter group. Much of the building was fitted with piping to recapture and recondense the Helium after its experiments strictly due to how much it cost and how rare it is. If someone offers for you to break an overclocking record with it you are obliged to say yes.
The achieved overclock appears to be tuned towards the application. Memory frequency was kept at 1333 MHz with a FSB of about 110 MHz. I would expect this multiplier-centric overclock is designed to keep the overclock focused on sheer number crunching which Super Pi likely relies on over memory bandwidth. Perhaps reduced memory timings might even come in to play for applications like this?
ASUS broke a few records with their Liquid Helium attempt. As of time of writing none of these records have been updated to the HWBot leaderboard.
With Super Pi running to 1 million digits Asus and their team recorded a time of 5s 94ms -- 31 milliseconds faster than the current leading time of 5s 125ms. The current leaderboard already contains the ASUS Maximus V Extreme motherboard in Gold, Silver, and Bronze positions. This podium has already been well represented by the Maximus V.
When you cannot be satisfied with 1 million digits of pi you can run the marathon to 32 million digits.
The most current record that I could find was set by a team sponsored by GSkill who achieved the time of 4min 44sec 609ms just a couple of weeks ago. ASUS and their team - which apparently has at least one member, “Smoke”, in common with the team GSkill assembled - also beat this record by almost 2 full seconds with a score of 4min 43s 0ms.
Subject: Processors | October 2, 2012 - 04:56 PM | Jeremy Hellstrom
Tagged: vishera, trinity, Steamroller, piledriver, bulldozer, amd, a8, a6, A4, a10, 5800K, 5600K
The NDA is over and we can finally tell you all about the new generation of Trinity, especially the compute portion which we were not allowed to discuss in the controversial preview. Part of the good news is the price, Legit Reviews found the highest MSRP is $122 for the A10-5800K and it is currently available, though at $130. The performance increase from the previous generation is decent for multicore applications though not so much for single threaded applications, overall you can expect general computing performance in line with Core i3 but not Core i5. Gaming on the other hand did show much improvement, especially with you compare the built in HD7660D to Intel's current HD4000 and HD3500. You can catch Josh's review right here.
"The internal testing from AMD that we can see above shows a 37% increase in the 3DMark 11 score between the first generation A-Series Llano and this generation of A-Series Trinity. While our numbers don't match their numbers exactly, our Llano system scored 1115 3Dmarks while the AMD internal testing showed 1150 3DMarks. Our AMD A10-5800K scored 1521 3DMarks while they scored 1570. The overall difference was remarkably similar, AMD is boasting an increase of 37% and we saw a difference of 36.4%..."
Here are some more Processor articles from around the web:
- AMD’s Trinity Faces Off With Intel’s Ivy Bridge @ SemiAccurate
- AMD “Virgo” Platform: 2nd Generation APU @ Bjorn3D
- AMD A10-5800K APU Performance Review @ HardwareHeaven
- AMD A10-5800K and A8-5600K APUs for Socket FM2 @ techPowerUp
- AMD A10-5800K Trinity APU Review @ TechwareLabs
- Asus F2A85-V Pro & AMD A10 5800K (w/ HD7660D) @ Kitguru
- AMD A10-5800K & A8-5600K Review: Trinity on the Desktop, Part 2 @ AnandTech
- AMD A10 5800K APU processor review and MSI FM-2 A85XA-G65 @ Guru of 3D
- AMD A10-5800K Unlocked "Trinity" Quad Core APU Review @ Hi Tech Legion
- AMD A8-3850 CPU review @ Rbmods
- Gigabyte F2A85X-UP4 & AMD A10 5800K @ Kitguru
- AMD A10-5800K / A8-5600K full review: Trinity for desktops @ Hardware.info
- AMD Trinity for Desktops. Part 1: Graphics Core @ X-bit Labs
- Workstation & Server CPU Comparison Guide @ TechARP
- All Core i3 Models @ Hardware Secrets
- Intel Core i3 3225 and 3220 review: entry-level Ivy Bridge @ Hardware.info
Subject: Processors | September 29, 2012 - 10:46 PM | Tim Verry
Tagged: vishera, piledriver, amd, am3+
Trinity APUs are not the only Piledriver-based processors that AMD will be releasing this year. Trinity is coming next month, but later this year AMD should be putting out Vishera processors based on Piledriver CPUs cores – and without integrated GPUs. And now, thanks to a retailer leaking details on its website, we now know some basic specifications – and more importantly – pricing.
For the uninitiated, Vishera is AMD’s next generation processor. It will use the existing AM3+ socket, and is built on a 32nm HKMG manufacturing process. Further, the CPUs are based on the Piledriver architecture which features a number of efficiency improvements over Bulldozer. Thanks to the architecture tweaks, and Cyclos Semiconductor’s resonant clock mesh technology that reduces the amount of power needed to keep the clock frequency synced across the entire chip. The architecture tweaks result in improved instructions per clock (IPC), improved floating point performance, leakage reduction, AMD Turbo Core 3, and new FMA3, AVX, AVS1.1, AES, and F16C instructions among other improvements.
For more information on the Piledriver architecture, and where AMD is taking it with Vishera, read the “AMD: Vishera and Beyond” editorial we recently posted. Also relevant is our mobile Trinity (A10-4600M) review which gives some small hints at the kind of CPU improvements we can expect with desktop Piledriver CPU cores versus the previous generation.
According to eTeknix, the recently leaked information from Bottom Line Telecomunications includes clock speed, core count, amount of cache, TDP and pricing for four of AMD's upcoming FX series Vishera processors: the FX 4300, FX 6300, FX 8320, and FX 8350. The FX 4300 is a quad core processor clocked at 3.8GHz with 8MB of cache and a 95W TDP (thermal design power). It was priced at $131.62 on the company's website. The FX 6300 CPU brings the core count up to six, and increases the cache to 14MB. It keeps the same 95W TDP as the FX 4300 but is clocked at 3.5GHz and costs $175.77.
The FX 8320 and FX 8350 are both eight core processors and have a 125W TDP. The FX 8320 is a $242.05 part with 16MB cache and comes clocked at 3.5GHz. The FX 8350 keeps the same 16MB cache but is clocked at 4GHz and, as a result, costs more at $253.06.
The FX 8320 in particular appears to be a neat processor, and will likely be the more popular of the two FX 8000 series as enthusiasts will overclock it match (or exceed) the FX 8350 while paying the cheaper price (since the only thing you are really giving up with the lower-end part is clockspeed, and not cache)!
It will be interesting to see if the Piledriver-based chips are worth the price though, since we have yet to see independant CPU performance benchmarks for either Vishera or Trinity. The following table is the leaked information from shopBLT mentioned above in table form.
|shopBLT Item #||Manufacturer Part #||Description||Price|
|BPW4489||FD4300WMHKBOX||FX 4300 QC CPU AM3+ 8MB 95W 3.8GHz Box||$131.62|
|BPW4488||FD6300WMHKBOX||FX 6300 6C CPU AM3+ 14MB 95W 3.5GHz Box||$175.77|
|BPW4487||FD8320FRHKBOX||FX 8320 8C CPU AM3+ 16MB 125W 3.5GHz box||$242.05|
|BPW4486||FD8350FRHKBOX||FX 8350 8C CPU AM3+ 16MB 125W 4GHz Box||$253.06|
Speaking of pricing, AMD will not only be competing with Intel's Sandy Bridge processors, but its latest Ivy Bridge chips as well, so pricing will be key to AMD selling its CPUs. In the following chart, we compared AMD's upcoming Vishera processors (based on the leaked information above) to Intel's latest Ivy Bridge parts. Because we do not know what the performancer of Piledriver will be, we matched up the Bulldozer CPUs to the Intel competition based on pricing. Essentially, we attempted to find the the Ivy Bridge CPU with the closest price tag to the Vishera processors' price. Intel's 22nm process has definitely given the company a leg up on TDPs, but you do get as many as twice the cores (and cache) with AMD for the price. The FX 8350 is an odd part in that it does not have a good Ivy Bridge equivalent, because there is no approximately $250 Ivy Bridge CPU. The next-closest CPU is the Core i7-3770 at just-over $300. Note that it may end up being that a lower priced chip will actually perform equivalently (or outperform) to the FX 8350 – we just do not know at this point and the only basis for matching these up for sake of comparison is price right now.
|Processor Model||FX 4300||FX 6300||FX 8320||FX 8350||Core i3 3220||Core i5 3550P||Core i5-3570K||Core i7 3770|
|No. of cores (HT)||4||6||8||8||2 (4)||4||4||4 (8)|
|Clockspeed (turbo)||3.8GHz||3.5GHz||3.5GHz||4GHz||3.3GHz||3.1GHz (3.5)||3.4GHz (3.8)||3.4GHz (3.9)|
The Intel processors were chosen base on pricing and not performance per-se. Note that the i5-3550P does not include integrated graphics.
Another interesting match up is the comparison between AMD's next generation Vishera processors and its current generation Zambezi Bulldozer CPUs.
The FX 4300 cache number seems like the only oddity, but is based on leaked information above.
Assuming that the leaked pricing ends up being accurate, AMD has put itself in an odd position with Vishera. Across the board, the Piledriver-based chips are notably more expensive than the Bulldozer predecessors. The next generation chips are offering up higher clockspeeds – and in some cases – lower TDPs. On the other hand, they are coming in at a premium, and AMD is already facing stiff competition from Intel’s Ivy Bridge and Sandy Bridge processors.
AMD will really have to bring the promised performance improvements in order to move its Vishera chips at these prices. Performance is key, and unfortunately that's one aspect of Piledriver that we don't yet know beyond AMD's claims. Personally, I'm hopeful that they will deliver on the claimed efficiency tweaks and that Vishera will be a success. At the very least, it should offer a nice upgrade for owners of AM3+ motherboards.
After the Trinity launch, we should have more information on the the level of CPU performance we can expect from Piledriver. Keep an eye on PC Perspective for more information on Vishera and the Piledriver architecture in general as it comes in!
Read more about AMD's Piledriver microarchitecture.
Subject: Processors | September 27, 2012 - 07:53 PM | Jeremy Hellstrom
Tagged: trinity, preview, papermaster launch, disappoint, amd, A10 5800K
By now you have probably realized that there is some commotion surrounding AMD's preview of their new Trinity chips. As you can see below, many sites chose to post this preview as it is new information, regardless of the limits that AMD required reviewers to submit to. Before you woke up this morning you did not have the knowledge you do now about Trinity's power consumption and gaming performance, for example Legit Reviews results, and on the 2nd you will get the rest of the results, which is not too far off in the future.
While limiting reviewers to a certain set of benchmarks for a preview is not a popular move for readers or writers, it is nothing new. From Kyle's take on NVIDIA's reviewers guide to the driver wars which have gone on and on and on for longer than it is easy to find links for; there is a dirty side to reviewing. Sometimes companies release new products and go out of their way to ensure that reviewers do not get their hands on before the products are for sale. Of course reviewers occasionally go out and buy those products and once they get them on their test benches it becomes obvious why the companies did not send out review samples. You don't have to like these practices, or accept them, but please realize that it is nothing new when you are lodging your complaints ... and do lodge complaints to the manufacturers if you find yourself upset. Here at PC Perspective we want to give you all the information we can, even if it means we can only give it to you piecemeal, you do still get it.
"So far, it appears that these APUs have an advantage over Intel's Ivy Bridge processors when it comes to graphics. The new AMD Radeon HD 7000 series GPU in these APUs is clearly superior to the GPU found in equivalent and even more expensive Ivy Bridge processors. Additional tests will have to wait until October 2nd, as that is when AMD is allowing full reviews of the new 'Trinity' APUs..."
Here are some more Processor articles from around the web:
- AMD attempts to shape review content with staged release of info @ The Tech Report
- AMD A10 5800K Trinity APU preview @ Guru 3D
- AMD A10-5800K APU Preview (Virgo) @ HardwareHeaven
- AMD A10-5800K / A8-5600K review part one: Trinity for desktops @ Hardware.info
- AMD Trinity A10 5800k performance demonstration @ Kitguru
- AMD Trinity FM2 APU Preview @ techPowerUp
- AMD Trinity: An iGPU Performance Preview @ Bjorn3D
- AMD Trinity A10-5800K vs Intel Ivy Bridge i5-3470 - Discrete GPU Gaming Performance @ VR-Zone
- AMD Trinity APU A10-5800K & A8-5600K Preview @ Benchmark Reviews
- AMD A10-5800K & A8-5600K Review: Trinity on the Desktop, Part 1 @ AnandTech
- AMD's Trinity : An HTPC Perspective @ AnandTech
- Roundup: Intel Core i3 Processors with Ivy Bridge Microarchitecture @ X-bit Labs
- Roundup: Intel Core i5 Processors with Ivy Bridge Microarchitecture @ X-bit Labs
- A Complete List of CPU Sockets @ Hardware Secrets
Subject: General Tech, Processors, Mobile | September 27, 2012 - 12:26 PM | Tim Verry
Tagged: SoC, PowerVR, iphone, arm, apple, a6
Apple's latest smartphone was unveiled earlier this month, and just about every feature has been analyzed extensively by reviewers and expounded upon by Apple. However, the one aspect that remains a mystery is the ARM System on a Chip that is powering the iPhone 5. There has been a great deal of speculation, but the officially Apple is not talking. The company has stated that the new processor is two times faster than its predecessor, but beyond that it will be up to reviewers to figure out what makes it tick.
After the press conference PC Perspective's Josh Walrath researched what few hints there were on the new A6 processor, and determined that there was a good chance it was an ARM Cortex A15-based design. Since then some tidbits of information have come out that suggest otherwise, however. Developers for iOS disovered that the latest SDK suggest new functionality for the A6 processor, including some new instruction sets. That discovery tended credence to the A6 possibly being Cortex A15, but it did not prove that it wasn't. Following that, Anandtech posted an article that stated it was in a licensed Cortex A15 design. Rather, the A6 was a custom Apple-developed chip that would, ideally, give users the same level of performance without needing significantly more power – and without waiting for a Cortex A15 chip to be manufactured.
Finally, thanks to the work of the enthusiasts over at Chipworks, we have physical proof that, finally, reveals details about Apple's A6 SoC. By stripping away the outer protective layers, and placing the A6 die under a powerful microscope, they managed to get an 'up close and personal' look at the inside of the chip.
Despite the near-Jersey Shore (shudder) levels of drama between Apple and Samsung over the recent trade dress and patent infringement allegations, it seems that the two companies worked together to bring Apple's custom processor to market. The researchers determined that the A6 was based on Samsung's 32nm CMOS manufacturing process. It reads APL0589B01 on the inside, which suggests that it is of Apple's own design. Once the Chipworks team sliced open the processor further, they discovered proof that Apple really did craft a custom ARM processor.
In fact, Apple has created a chip with dual ARM CPU cores and three GPU cores (PowerVR). The CPU cores support the ARMv7s instruction set, and Apple has gone with a hand drawn design. Rather than employ computer libraries to automatically lay out the logic in the processor, Apple and the engineers acquired from its purchase of PA Semi have manually drawn out the processor by hand. This chip has likely been in the works for a couple of years now, and the 96.71mm^2 sized die will offer up some notable performance improvements.
It seems like Apple has opted to go for an expensive custom chip rather than opt for a licensed Cortex A15 design. That combined with the hand drawn layout should give Apple a processor with better performance than its past designs without requiring significantly more power.
At a time when mobile SoC giant Texas Instruments is giving up on ARM chips for tablets and smartphones, and hand drawn designs are becoming increasingly rare (even AMD has given up), I have to give Apple props for going with a custom processor laid out by hand. I'm interested to see what the company is able to do with it and where they will go from here.
Chipworks and iFixIt also took a look at the LTE modem, Wi-Fi chip, audio amplifier, and other aspects of the iPhone 5's internals, and it is definitely worth a read for the impressive imagery alone.
Subject: Processors | September 18, 2012 - 01:49 PM | Jeremy Hellstrom
Tagged: sandy bridge, Ivy Bridge, Intel
iXBT Labs wanted to see how the two most current generations of Intel processors compare when running identical tasks. To put the processors under maximum load they used Linpack and Furmark as well as looking at video playback. In the case of the Furmark and Linpack+Furmark tests it might have been nice to see a power versus performance metric, as better performance on the benchmarks could make a slightly less power hungry CPU even more attractive. However the video playback is a great example of what you can expect in the way of power draw as no one wants a faster processor to play their movie back at an increased speed, a 2 hour movie should take 2 hours to play. That makes the second metric a little more valuable for those on battery power. Take a quick peek at their 2 page article here.
"We measured consumed power and energy consumption of four configurations based on the same testbed and four different CPUs belonging to two platforms: Intel Core i7-2700K (Sandy Bridge) and Intel Core i7-3770K (Ivy Bridge), Intel Core i5-2400 (Sandy Bridge) and Intel Core i5-3450 (Ivy Bridge)."
Here are some more Processor articles from around the web:
- Intel Core i5 3470 @ Phoronix
- Ivy Bridge and changing the Thermal Interface Material @ eTeknix
- Intel Core Generations Comparison @ iXBT Labs
- Workstation & Server CPU Comparison Guide @ TechARP
- Desktop CPU Comparison Guide @ TechARP
Subject: Processors | September 13, 2012 - 01:03 PM | Tim Verry
Tagged: trinity, fm2, cpu, athlon, APU, AMD A series, amd, a75
NVIDIA’s new Kepler graphics cards (such as the GTX 660 we recently reviewed) will be getting most of the PC enthusiast attention today, but there is a bit of news about AMD to talk about as well.
The Trinity APU die.
Thanks to a Gigabyte motherboard compatibility list that was accidentally leaked to the internet, it was revealed that Advanced Micro Devices (AMD) would be repurposing Trinity APU dies that don’t quite make the cut due to non-operative graphics cores. Instead of simply discarding the processors, AMD is going to bin the chips into at least three CPU-only Athlon-branded processors. The Athlon X4 730, X4 740, and X4 750K are the three processors that are (now) public knowledge. All three of the CPUs have TDP ratings of 65W, and the X4 750K is even unlocked – allowing for overclocking. Further, the processors are all quad core parts with a total of 4MB of L2 cache (1MB per core).
The new Athlon-branded processors will be supported by the A75 chipset and will plug into FM2-socket equipped motherboards.
The following chart details the speeds and feeds of the Athlon processors with Trinity CPU cores.
|Athlon X4 730||2.8GHz||65W|
|Athlon X4 740||3.2GHz||65W|
|Athlon X4 750K||3.4GHz||65W|
Unfortunately, there is no word on pricing or availability. You can expect them to be significantly cheaper than the fully fledged Trinity processors to keep them price-competitive and in-line with the company's traditional CPU-only processors.
Would you consider rolling a Trinity-based Athlon in a budget build?
Read about the new direction of AMD as it moves to producing Vishera processors and beyond.
Subject: General Tech, Cases and Cooling, Processors, Systems, Shows and Expos | September 12, 2012 - 09:34 PM | Scott Michaud
Tagged: mineral oil, Intel
Intel has been dunking servers in oil for the last year and found the practice to be both safe and effective. Ironically it has been almost a year since we played around with mineral oil cooling – and when we did – we did not want to upgrade or fix anything. Intel agrees.
Intel inside, slick mess outside.
Often cooling a computer with a radiant that is not air focuses on cooling a handful of specific components and leaving the rest exposed to air. Gigabyte in their recent live presentation showed how the company reduced waste heat on the motherboard as it delivers power to the CPU as the latter likely receives more cooling than the former. With mineral oil you are able to more efficiently cool the entire system by immersing it in a better coolant than air.
This still makes Ken wake up in a cold sweat… is what we convince ourselves.
After a full year of testing servers, Intel has decided that oil immersion cooling should be utilized by more server hosts to cut costs over traditional air conditioning. In their test they used heat sinks which were designed for air and dunked them pretty much unmodified into the mineral oil dielectric. Apart from the mess of it – Intel engineers always carried cleaning cloths just in case – Intel seems to only sing praise for results of their study.
Of course Intel could not help but promote their upcoming Phi platform which you may know as the ancestor of Larabee.
Now the real question is whether Intel just wanted to shamelessly plug themselves – or whether they are looking so closely at alternative cooling solutions as a result of their upcoming Phi platform. Will we eventually see heat dissipation concerns rear their heads with the new platform? Could Intel either be sitting on or throttling Phi because they are waiting for a new heat dissipation paradigm?
Could be interesting.
Subject: Editorial, General Tech, Processors | September 11, 2012 - 11:52 AM | Ryan Shrout
Tagged: Intel, idf, idf 2012, keynote
The Intel Developer Forum is one of the best places in the world to get information and insight on the future of technology directly from those that creat it. Join me as I live blog (Wi-Fi connection dependent as always!) the keynotes from all three days at http://pcper.com/live!!
Be sure to stop by our PC Perspective Live page at 9am PT on Tuesday, Wednesday and Thursday!!
Subject: Processors | September 6, 2012 - 01:10 PM | Tim Verry
Tagged: ultrabook, Intel, haswell, cpu, 10w tdp
Intel’s next generation Haswell CPU architecture is set to lower the bar even further on power efficiency by requiring only 10W of cooling. As the company’s mainstream processor, and replacement for Ivy Bridge, it is set to launch in the first half of 2013.
Haswell will be based on a new socket called LGA 1150, and is said to feature incremental performance improvements over Ivy Bridge. Further, Haswell CPUs will include one of three tiers of GT1, GT2, or GT3 processor graphics along with the AVX2 instruction set.
What is interesting about the recent report by The Verge is that previous rumors suggested that Haswell would have higher TDP ratings than both Sandy Bridge and Ivy Bridge. Considering Ivy Bridge has several 35W desktop models, and a few 17W mobile parts, the reported 10W TDP of Haswell seems to indicate that at least the mobile editions of Haswell will actually have much lower TDPs than Ivy Bridge. (It is not clear if detkop and non ultra-low-voltage (ULV) chips will see similar TDP improvements or not.)
The 10W TDP would mean that ultrabooks and other thin-and-light laptops could use smaller heatsinks and suggests that the processors will be more power efficient resulting in battery life improvements (which are always welcome). The Verge further quoted an Intel representative in stating that "It's really the first product we're building from the ground up for ultrabook."
While the lowest-power Haswell chips won’t be powerhouses on the performance front, with the improvements over Ivy Bridge to the CPU and GPU it should still handily best the company’s Atom lineup. Such a feat would allow Haswell to secure a spot powering future Windows 8 slates and other mobile devices where Atom is currently being used.
Just the fact that Intel has managed to get its next generation mainstream CPU architecture down to 10W is impressive, and I’m looking forward to see what kinds of devices such a low power x86-64 chip will enable.
Stay tuned for more Haswell news as the Intel Developer Forum (IDF) next week should be packed with new information. Here's hoping that the desktop chips manage some (smaller) TDP improvements as well!
Subject: Processors | September 4, 2012 - 10:46 AM | Tim Verry
Tagged: sandy bridge, Ivy Bridge, Intel, core i3, 35w
Back in March of this year, Intel launched a slew of third generation Core Ivy Bridge processors. At the high end sat the Core i7-3770K with 4 cores, hyperthreading, 3.5 GHz clockspeed (3.9 GHz Turbo Boost), 8 MB L3 cache, and a 77W TDP for $332. The lineup went down in features – and price – from there all the way to the Core i5-3330S. The 3330S had four cores, 6 MB of L3 cache, a 65W TDP, and a clockspeed of 2.7 GHz (3.2 GHz Turbo Boost). Further, just about every CPU that was not a K, S, or T edition came equipped with the older HD 2500 integrated processor graphics. While the list comprised 18 new processors, the lower-end Core i3 Ivy Bridge CPUs were noticeably absent.
Fortunately, FanlessTech has managed to get ahold of pricing and specifications for five of those lower cost Intel chips. The new additions to Intel's lineup include three Ivy Bridge processors and two Sandy Bridge CPUs. Specifically, we have the i3-3240T, i3-3220T, Pentium G2100T, Pentium G645T, and Pentium G550T. All of those parts have a TDP of 35W and are priced very affordably.
|Model||Cores / Threads||Clockspeed||L3 Cache||TDP||Launch Price ($USD)|
|i3-3240T||Ivy Bridge||2/4||2.90 GHz||3MB||35W||$138|
|i3-3220T||Ivy Bridge||2/4||2.80 GHz||3MB||35W||$117|
|Pentium G2100T||Ivy Bridge||2/2||2.60 GHz||3MB||35W||$75|
|Pentium G645T||Sandy Bridge||2/2||2.50 GHz||3MB||35W||$64|
|Pentium G550T||Sandy Bridge||2/2||2.20 GHz||2MB||35W||$42|
The Core i3-3240T and i3-3220T are dual core Ivy Bridge processors build on a 22nm process, and are priced at just over $100. The cheapest Ivy Bridge CPU is actually the Pentium G2100T at $75 so the barrier to entry for Intel’s latest chips is much lower than it was a few months ago. Intel’s second generation Core architecture is still alive and kicking as well with the Pentium G645T and G550T at $64 and $42 respectively.
Two specifications are still unkown: Turbo Boost clockspeeds (if any) and which version of processor graphics these chips will feature. On the graphics front, I think HD 2500 is a safe bet but Intel may throw everyone a curve ball and pack the higher-end processor graphics into the low end units – which are arguably the (computers) that need the better GPU the most.
Granted, these lower cost processors are not going to give you near the performance of the i7-3770K that we recently reviewed, but they are still important for low power and budget desktops. Bringing the power efficiency improvements of Ivy Bridge down to under $100 is definitely a good thing.
As far as availability, you can find some of the new low TDP processors at online retailers now (such as the Core i3-3220T), but others are not for sale yet. While I do not have any exact dates, they should be available shortly.
How would you put these low TDP dual cores to work?
Subject: Processors | August 27, 2012 - 01:56 PM | Jeremy Hellstrom
Tagged: amd, am3+, fx-4130
AMD has good news for those looking to build or upgrade an AMD powered system as they are lowering their prices on processors across the board as well as adding the new four core Socket AM3+ FX-4130, with a 3.8GHz base clock and 3.9GHz in Turbo. It is not yet for sale but is expected to retail for $112, easily affordable for most users looking for a lower cost system.
"The value proposition for the first generation AMD A-Series APUs is also compelling: A quad-core CPU and a DirectX® 11 highly-capable gaming GPU on a single-chip with more than 500 GFLOPs of compute power, for under $100 (A8 3850). Working together, the CPU and GPU can accelerate a range of applications to outperform a stand-alone CPU in some use cases. The lower-power first generation AMD A-Series APUs are even more affordable and are receiving positive reviews for small-form factor HTPCs as well. Price reductions across the first generation AMD A-Series APUs stack are in effect now, so please check your local retailer!"
Subject: Processors | August 20, 2012 - 04:07 PM | Jeremy Hellstrom
Tagged: linux, Ivy Bridge, Intel, i5-3470, hd 2500
The new Ivy Bridge processors introduced a new member of Intel's graphics processor called the HD 2500, which has received less than positive reviews as the previous HD 3000 outperforms it. However those tests were for Windows applications and games, whereas the testing at Phoronix specifically pertains to the performance under Linux. They compare the i5-2400S, i5-2500K, i5-3470, and i7-3770K together in a series of benchmarks to not only test the performance but also their compatibility with Linux. It seems that perhaps the performance of the HD3000 and HD2500 are much closer in Linux than they were running under Windows, though both still lose out to the HD4000.
"Since the launch of Intel's Ivy Bridge processors earlier this year there have been many benchmarks of the Intel Core i7 3770K with its integrated HD 4000 graphics and then more recently have been Linux testing of the Intel Core i7 3517UE from the CompuLab Intense-PC and Intel Core i7-3615QM as found on the Apple Retina MacBook Pro. The newest Intel Ivy Bridge chip to play with at Phoronix is the Intel Core i5 3470, which bears an Intel HD 2500 graphics core. In this article are benchmarks of the Intel HD 2500 Ivy Bridge graphics with the open-source Intel Linux graphics driver stack."
Here are some more Processor articles from around the web:
- Intel Ivy Bridge: GCC 4.8 vs. LLVM/Clang 3.2 SVN @ Phoronix
- Intel Core i7-3820 Processor Review (10M Cache, 3.60 GHz) @ TechwareLabs
- Desktop CPU Comparison Guide @ TechARP
- Mobile CPU Comparison Guide @ TechARP
- AMD Athlon II X4 641, Athlon II X4 651 @ iXBT Labs
Subject: Editorial, General Tech, Graphics Cards, Motherboards, Cases and Cooling, Processors, Memory, Systems, Storage, Mobile, Shows and Expos | August 9, 2012 - 10:30 PM | Ryan Shrout
Tagged: video, workshop, streaming, quakecon, prizes, live, giveaways
It is that time of year again: another installment of the PC Perspective Hardware Workshop! Once again we will be presenting on the main stage at Quakecon 2012 being held in Dallas, TX August 2-5th.
Main Stage - Quakecon 2012
Saturday, August 4th, 2pm CT
Our thanks go out to the organizers of Quakecon for allowing us and our partners to put together a show that we are proud of every year. We love giving back to the community of enthusiasts and gamers that drive us to do what we do! Get ready for 2 hours of prizes, games and raffles and the chances are pretty good that you'll take something out with you - really, they are pretty good!
Our thanks for this year's workshop logo goes to John Pastor!!
Our primary partners at the event are those that threw in for our ability to host the workshop at Quakecon and for the hundreds of shirts we have ready to toss out! Our thanks to NVIDIA, MSI Computer and Corsair!!
If you can't make it to the workshop - don't worry! You can still watch the workshop live on our page right here as we stream it over one of several online services. Just remember this URL: http://pcper.com/workshop and you will find your way!
Case Mod Competition
Along with the Hardware Workshop, PC Perspective is working with Modders Inc on the annual case mod contest! There are two categories for the competition: "Scratch Built" and "In the Box" that will allow those that build their computer enclosures from the ground up to compete separately from those that heavily modify their existing cases and systems.
For more details, be sure to check out the on going thread at the Modders Inc Forums!
Prize List (will continue to grow!)
Subject: General Tech, Graphics Cards, Motherboards, Cases and Cooling, Processors, Chipsets, Memory, Displays | August 7, 2012 - 10:07 AM | Tim Verry
Tagged: Z77, motherboard, mini-itx, Intel, gigabyte, ga-h77n-wifi
During a European roadshow, Gigabyte showed off a new Mini-ITX form factor motherboard for the first time. Called the GA-H77N-WIFI, the motherboard is well suited for home theater and home server tasks. Based on the H77 chipset, it is compatible with the latest Intel Core i3 (coming soon), i5, and i7 "Ivy Bridge" processors. The board goes for an all-black PCB with minimal heatsinks on the VRMs, and the form factor is the same size as the motherboard that Ryan recently used in his Mini-ITX HTPC build.
The GA-H77N-WIFI features a LGA 1155 processor socket, two DDR3 DIMM slots, PCI Express slot, two SATA 3Gbps ports, two SATA 6Gbps ports, and an internal USB 3.0 header. There are also two Realtek Ethernet controller chips and a Realtek audio chip.
- 1 PS/2 port
- 2 USB 3.0 ports
- 2 HDMI ports
- 1 DVI port
- 2 Antenna connectors (WIFI)
- 4 USB 2.0 ports
- 2 Gigabit Ethernet ports
- 1 Optical S/PDIF port
- 5 Analog audio jacks
The dual Gigabit Ethernet ports are interesting. It could easily be loaded with open source routing software and turned into router/firewall/Wi-Fi access point. To really take advantage of the Ivy Bridge support, you could put together a nice media server and HTPC recording/streaming box (using something like SiliconDust's HDHomeRun networked tuners or Ceton's USB tuner since this board is very scarce in the way of PCI-E slots). What would you do with this Mini-ITX Gigabyte board?
Unfortunately, there is no word yet on pricing or availability, but the motherboard is likely coming soon. You can find more information on the motherboard over at tonymacx86, who managed to snag get some photos of the board.
Subject: General Tech, Processors | August 6, 2012 - 02:12 AM | Scott Michaud
Tagged: Ivy Bridge-E, Intel
According to VR-Zone, an Intel roadmap has surfaced which outlines the upper end of the company’s CPU product line through the end of 3rd Quarter 2013. The most interesting albeit also most confusing entry is the launch of Ivy Bridge-E processors in the quarter after the Haswell mainstream parts.
So apparently the lack of high-performance CPU competition unhooked Intel’s tick-tock-clock.
The latest Intel CPU product roadmap outlines the company’s expected product schedule through to the end of Q3 2013. The roadmap from last quarter revealed that Intel’s next architecture, Haswell, would be released in the second quarter of 2013 with only Sandy Bridge-E SKUs to satisfy the enthusiasts who want the fastest processors and the most available RAM slots. It was unclear what would eventually replace SBE as the enthusiast part and what Intel expects for their future release cycles.
I can Haswell-E’zburger?
(Photo Credit: VR-Zone)
Latest rumors continue to assert that Sandy Bridge-E X79 chipset-based motherboards will be able to support Ivy Bridge-E with a BIOS update.
The downside: personally, not a big fan of upgrading CPUs frequently.
In the past I have never kept a motherboard and replaced a CPU. While I have gone through the annoyance of applying thermal paste – and guessing where Arctic Cooling stains will appear over the next 2 weeks – I tend to even just use the default thermal tape which comes with the stock coolers. I am not just cheap or lazy either; I simply tend to not feel a jump in performance unless I allow three to five years between CPU product cycles to pass by.
But that obviously does not reflect all enthusiasts.
But how far behind on the enthusiast architectures will Intel allow themselves to get? Certainly someone with my taste in CPU upgrades should not wait 8-10 years to upgrade our processors if this doubling of time-between-releases continues?
What do you think is the future of Intel’s release cycle? Is this a one-time blip trying to make Ivy Bridge scale up or do you expect that Intel will start releasing progressively more infrequently on the upper end?
Subject: Processors | August 1, 2012 - 08:38 AM | Josh Walrath
Tagged: x86-64, x86, MIPS, Jim Keller, arm, amd, Alpha
There has been quite a bit of news lately from AMD, and very little of it good. What has perhaps dominated the headlines throughout this past year was the amount of veteran AMD employees who have decided (or were pushed) to seek employment elsewhere. Not much has been said from these departing employees, but Rory Read certainly started things off with a bang by laying off some 10% of the company just months into his tenure.
Now we finally have some good news in terms of employment. AMD has hired a pretty big name in the industry. Not just a big name, but a person who was one of the primary leads on two of AMD’s most successful architectures to date. Jim Keller is coming back to AMD, and at a time where it seems AMD needs some veteran leadership who is very in touch with not just the industry, but CPU architecture design.
Jim was a veteran of DEC and worked on some of the fastest Alpha processors of the time. Much could be written about DEC and how they let what could have been one of the most important and profitable architectures in computing history sit essentially on the back burner while they focused on seemingly dinosaur age computing. After the Alpha was sold off and DEC sold away, Jim found his way to AMD and played a very important role at that company.
The first product was helping to launch the K7, and worked primarily with system engineering. The vast majority of design work for the K7 was finished by the time he signed on, but he apparently worked quite a bit on integrating it into the new socket architecture that was derived from the DEC Alpha. Where Jim really earned his keep was in co-authoring the x86-64 specification and being lead architect on the AMD K8 series of processors. While he left in 1999, the mark he left on AMD is essentially indelible.
After AMD he joined Sibyte (Broadcom) and was lead architect on a series of MIPS processors used in networking devices. This lasted until 2003 and he again left the company seemingly more prosperous than when he began.
PA-Semi was the next stop and he worked again primarily on networking specific SOCs utilizing the PowerPC architecture. So far, by counting fingers, Jim has worked on five major ISAs (Alpha, x86, x86-64, MIPS, and PowerPC). These chips were able to power networking devices with 10 Gb throughput. PA-Semi was then purchased by Apple in 2007/2008.
At Apple Jim was now Director of Platform Architecture and worked with yet another major ISA; ARM. Jim worked to develop several major and successful products with the A4 and A5 processors that have powered the latest iPhone and iPad products from the Cupertino giant. To say that this individual has had his fingers in some very important pies is an understatement.
Jim now rejoins AMD as CVP and Chief Architect of CPU Cores. He will report directly to Mark Papermaster. His primary job is to improve execution efficiency and consistency, as well as implement next generation features into future CPU cores which will keep AMD competitive with not only Intel, but other rising competitors in the low power space. This is finally some good news for AMD as they are actually adding talent rather than losing it. While Jim may not be able to turn the company around overnight, he does look to be an important piece of the puzzle with a huge amount of experience and knowhow with multiple CPU ISA. If there is anyone that can tackle the challenges in front of AMD in the face of a changing world, this might be the guy. So far he has had a positive impact in every stop he has made, and perhaps this could prove to be the pinnacle of his career. Or it could be where his career goes to die. It is hard to say, but I do think that AMD made a good hire with Jim.
Get notified when we go live!